mangavalkandClaude Opus 5.5
d49e65c0bb
- flex_lanes.cfg: a 5 s poller sets SET_LONG_MOVE_SPEED to 50 mm/s (AFC's minimum) for lanes whose material is TPU/TPE/flex and back to the configured long_moves_speed otherwise; reapplied after a restart. - BLOBIFIER_CHECKED: remembers the temperature of the filament in the nozzle (saved nozzle_last_temp). When it is more than flush_margin (10C) above the new filament's, the purge runs at that temperature and the nozzle cools back afterwards, so the leftover melts out (seen: ASA leftover with TPU loaded at 210C). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
55 lines
2.6 KiB
INI
55 lines
2.6 KiB
INI
# Flexible filament (TPU, TPE): slower long moves for the lanes holding it.
|
|
#
|
|
# Soft filament can buckle in the long tube at the normal 100-200 mm/s.
|
|
# A poller checks the material of every lane (from Spoolman via AFC) every
|
|
# 5 s and sets the lane's long-move speed: flex_speed for a flexible
|
|
# material, the configured long_moves_speed again when the lane holds
|
|
# something else. Only changes are sent. SET_LONG_MOVE_SPEED is runtime
|
|
# only; after a Klipper restart the poller applies it again.
|
|
#
|
|
# Not covered: the last stretch into the extruder (tool_load_speed in
|
|
# AFC/AFC_Hardware.cfg, 25 mm/s) has no runtime command and is the same
|
|
# for every lane. The purge after the load is already slow (2.5 mm/s).
|
|
|
|
[gcode_macro _FLEX_LANES_CFG]
|
|
variable_materials: ["tpu", "tpe", "flex"] # material containing one of these (any case) is flexible
|
|
variable_flex_speed: 50 # mm/s; AFC's minimum for SET_LONG_MOVE_SPEED is 50
|
|
variable_slowed: "" # runtime: comma list of lanes now at flex_speed
|
|
gcode:
|
|
|
|
[delayed_gcode _FLEX_LANES_POLL]
|
|
initial_duration: 10
|
|
gcode:
|
|
{% set cfg = printer["gcode_macro _FLEX_LANES_CFG"] %}
|
|
{% if 'AFC' in printer %}
|
|
{% set settings = printer.configfile.settings %}
|
|
{% set default_speed = settings.afc.long_moves_speed|default(150) if 'afc' in settings else 150 %}
|
|
{% set was = cfg.slowed.split(',')|reject('equalto', '')|list %}
|
|
{% set now = [] %}
|
|
{% for lane in printer.AFC.lanes %}
|
|
{% set key = 'AFC_stepper ' ~ lane %}
|
|
{% set mat = (printer[key].material if key in printer else '')|default('', true)|string %}
|
|
{% set ns = namespace(flex=false) %}
|
|
{% for m in cfg.materials %}
|
|
{% if m in mat|lower %}
|
|
{% set ns.flex = true %}
|
|
{% endif %}
|
|
{% endfor %}
|
|
{% if ns.flex %}
|
|
{% set _ = now.append(lane) %}
|
|
{% if lane not in was %}
|
|
SET_LONG_MOVE_SPEED LANE={lane} FWD_SPEED={cfg.flex_speed}
|
|
RESPOND MSG="{lane} holds {mat}: long moves at {cfg.flex_speed} mm/s (flexible)"
|
|
{% endif %}
|
|
{% elif lane in was %}
|
|
{% set speed = settings[key|lower].long_moves_speed|default(default_speed) if (key|lower) in settings else default_speed %}
|
|
SET_LONG_MOVE_SPEED LANE={lane} FWD_SPEED={speed}
|
|
RESPOND MSG="{lane} holds {mat or 'nothing'}: long moves back at {speed} mm/s"
|
|
{% endif %}
|
|
{% endfor %}
|
|
{% if now|join(',') != was|join(',') %}
|
|
SET_GCODE_VARIABLE MACRO=_FLEX_LANES_CFG VARIABLE=slowed VALUE='"{now|join(',')}"'
|
|
{% endif %}
|
|
{% endif %}
|
|
UPDATE_DELAYED_GCODE ID=_FLEX_LANES_POLL DURATION=5
|