- flex_lanes.cfg: a 5 s poller sets SET_LONG_MOVE_SPEED to 50 mm/s (AFC's
minimum) for lanes whose material is TPU/TPE/flex and back to the
configured long_moves_speed otherwise; reapplied after a restart.
- BLOBIFIER_CHECKED: remembers the temperature of the filament in the
nozzle (saved nozzle_last_temp). When it is more than flush_margin
(10C) above the new filament's, the purge runs at that temperature and
the nozzle cools back afterwards, so the leftover melts out (seen: ASA
leftover with TPU loaded at 210C).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5
d49e65c0bb