mangavalkandClaude Opus 5.5
eaf9c82617
- Split the macro files into folders by topic (print, heating, afc, pressure_advance, spoolman, leds, sensors); klipper-macros.cfg is the one file printer.cfg includes. Macros moved unchanged; the effective config is identical apart from the paths of the PA shell scripts. - Add the modified Blobifier (Turtleblobifier for AFC) and define [save_variables] once in save_variables.cfg instead of in both blobifier.cfg and the PA macros (same file, bd_pa_variables.cfg). - PRINT_WARMUP: heat to the loaded lane's temperature before the first tool change. AFC skips heating when the loaded lane's tool number is not in the print file's temperature list, and the unload then failed below min_extrude_temp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
24 lines
641 B
INI
24 lines
641 B
INI
# Idle timeout: heaters and motors off when the printer is idle
|
|
|
|
# [dynamicmacros]
|
|
# configs: Macros/dynamicmacros.cfg
|
|
|
|
# [gcode_button kill_switch]
|
|
# pin: gpio7
|
|
# press_gcode: M112
|
|
|
|
[idle_timeout]
|
|
gcode:
|
|
TURN_OFF_HEATERS
|
|
iHEATER_OFF ; Turns off the chamber heater
|
|
M84
|
|
# reset paused flag
|
|
{% if printer.pause_resume.is_paused|lower == 'false' and park|lower == 'true'%}
|
|
_TOOLHEAD_PARK_PAUSE_CANCEL
|
|
{% endif %}
|
|
_status_ready
|
|
# A list of G-Code commands to execute on an idle timeout. See
|
|
# docs/Command_Templates.md for G-Code format. The default is to run
|
|
# "TURN_OFF_HEATERS" and "M84".
|
|
timeout: 85400 # 24 hours
|