mangavalkandClaude Opus 5.5 93f00c87a7 Stop using bdwidth while printing, work without it ...

bdwidth's motion reading stays at 0, its per-reading width compensation
made the flow jump between 77 and 119%, and a USB dropout shut down
Klipper. PRINT_START no longer enables it. _PRINT_CLEANUP,
BLOBIFIER_CHECKED and PURGE_UNTIL_EMPTY only send bdwidth commands when
[bdwidth fila_width_0] exists, and bdwidth_status reports present: False
with neutral values when it is not configured, so the section can be
removed from printer.cfg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-12 18:18:40 +02:00

..

afc

Stop using bdwidth while printing, work without it

2026-10-12 18:18:40 +02:00

blobifier

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

heating

Fix pause/resume chain, shared print cleanup, add CLAUDE.md

2026-10-10 15:20:28 +02:00

leds

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

pressure_advance

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

print

Stop using bdwidth while printing, work without it

2026-10-12 18:18:40 +02:00

sensors

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

spoolman

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

klipper-macros.cfg

Include after AFC, link scripts/ into the config folder

2026-10-10 15:28:52 +02:00

save_variables.cfg

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00