HEAT_SOAK: resume without AFC, no trip to X0 Y0
A finished soak called RESUME, which goes through AFC_RESUME. HEAT_SOAK pauses with PAUSE_BASE, so AFC has no saved position and restores 0,0: the toolhead went to X0 Y0 at Z5 at up to 350 mm/s (AFC.log, 2026-11-04), and _Z_CHECK then moved straight back. Both nozzle guard stops in z_check (delta -34 and -33) happened in runs like this, with the toolhead front left. The exact source of the force is unknown. Call _RESUME_PRINT directly: it runs RESUME_BASE and skips the purge, because PAUSE did not park. A manual Resume during a soak still goes through AFC. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
1fc4b26366
commit
e540e40cf7
2 files changed
+7
-1
No files matched your search
@@ -293,8 +293,12 @@ gcode:
|
|||||||
{% if heat_soak.complete %}
|
{% if heat_soak.complete %}
|
||||||
{heat_soak.complete}
|
{heat_soak.complete}
|
||||||
{% endif %}
|
{% endif %}
|
||||||
|
# Not RESUME: that goes through AFC_RESUME, which restores AFC's saved
|
||||||
|
# position. HEAT_SOAK pauses with PAUSE_BASE, so AFC saved nothing and
|
||||||
|
# (seen 2026-11-04) sends the toolhead to X0 Y0 at up to 350 mm/s, just
|
||||||
|
# before the _Z_CHECK guard arms.
|
||||||
{% if printer['pause_resume'].is_paused %}
|
{% if printer['pause_resume'].is_paused %}
|
||||||
RESUME
|
_RESUME_PRINT
|
||||||
{% endif %}
|
{% endif %}
|
||||||
{% endif %}
|
{% endif %}
|
||||||
{% else %}
|
{% else %}
|
||||||
|
|||||||
@@ -4,6 +4,8 @@
|
|||||||
# PAUSE -> AFC_PAUSE (saves position, z-hop) -> this PAUSE -> PAUSE_BASE
|
# PAUSE -> AFC_PAUSE (saves position, z-hop) -> this PAUSE -> PAUSE_BASE
|
||||||
# RESUME -> AFC_RESUME -> this RESUME -> HEAT_SOAK_RESUME -> _RESUME_PRINT
|
# RESUME -> AFC_RESUME -> this RESUME -> HEAT_SOAK_RESUME -> _RESUME_PRINT
|
||||||
# -> RESUME_BASE, then AFC restores the saved position
|
# -> RESUME_BASE, then AFC restores the saved position
|
||||||
|
# A finished HEAT_SOAK calls _RESUME_PRINT directly: AFC saved no position for
|
||||||
|
# its pause, so AFC_RESUME would send the toolhead to X0 Y0.
|
||||||
# RESUME is defined only here: heating/heat_soak.cfg used to define its own,
|
# RESUME is defined only here: heating/heat_soak.cfg used to define its own,
|
||||||
# which replaced this one completely (no unretract, no fan restore).
|
# which replaced this one completely (no unretract, no fan restore).
|
||||||
# After a PAUSE, _RESUME_PRINT purges into the Blobifier with the purge check
|
# After a PAUSE, _RESUME_PRINT purges into the Blobifier with the purge check
|
||||||
|
|||||||
Reference in new issue
Block a user