From e540e40cf7515e28a1423ddc974a069ad80bad2b Mon Sep 17 00:00:00 2001 From: MangaValk Date: Wed, 4 Nov 2026 02:15:18 +0100 Subject: [PATCH] HEAT_SOAK: resume without AFC, no trip to X0 Y0 A finished soak called RESUME, which goes through AFC_RESUME. HEAT_SOAK pauses with PAUSE_BASE, so AFC has no saved position and restores 0,0: the toolhead went to X0 Y0 at Z5 at up to 350 mm/s (AFC.log, 2026-11-04), and _Z_CHECK then moved straight back. Both nozzle guard stops in z_check (delta -34 and -33) happened in runs like this, with the toolhead front left. The exact source of the force is unknown. Call _RESUME_PRINT directly: it runs RESUME_BASE and skips the purge, because PAUSE did not park. A manual Resume during a soak still goes through AFC. Co-Authored-By: Claude Opus 5.5 --- macros/heating/heat_soak.cfg | 6 +++++- macros/print/pause_resume.cfg | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/macros/heating/heat_soak.cfg b/macros/heating/heat_soak.cfg index 4bc18eb..3a80326 100644 --- a/macros/heating/heat_soak.cfg +++ b/macros/heating/heat_soak.cfg @@ -293,8 +293,12 @@ gcode: {% if heat_soak.complete %} {heat_soak.complete} {% endif %} + # Not RESUME: that goes through AFC_RESUME, which restores AFC's saved + # position. HEAT_SOAK pauses with PAUSE_BASE, so AFC saved nothing and + # (seen 2026-11-04) sends the toolhead to X0 Y0 at up to 350 mm/s, just + # before the _Z_CHECK guard arms. {% if printer['pause_resume'].is_paused %} - RESUME + _RESUME_PRINT {% endif %} {% endif %} {% else %} diff --git a/macros/print/pause_resume.cfg b/macros/print/pause_resume.cfg index 58678e1..360864e 100644 --- a/macros/print/pause_resume.cfg +++ b/macros/print/pause_resume.cfg @@ -4,6 +4,8 @@ # PAUSE -> AFC_PAUSE (saves position, z-hop) -> this PAUSE -> PAUSE_BASE # RESUME -> AFC_RESUME -> this RESUME -> HEAT_SOAK_RESUME -> _RESUME_PRINT # -> RESUME_BASE, then AFC restores the saved position +# A finished HEAT_SOAK calls _RESUME_PRINT directly: AFC saved no position for +# its pause, so AFC_RESUME would send the toolhead to X0 Y0. # RESUME is defined only here: heating/heat_soak.cfg used to define its own, # which replaced this one completely (no unretract, no fan restore). # After a PAUSE, _RESUME_PRINT purges into the Blobifier with the purge check