HEAT_SOAK: resume without AFC, no trip to X0 Y0

A finished soak called RESUME, which goes through AFC_RESUME. HEAT_SOAK pauses
with PAUSE_BASE, so AFC has no saved position and restores 0,0: the toolhead
went to X0 Y0 at Z5 at up to 350 mm/s (AFC.log, 2026-11-04), and _Z_CHECK then
moved straight back. Both nozzle guard stops in z_check (delta -34 and -33)
happened in runs like this, with the toolhead front left. The exact source of
the force is unknown.

Call _RESUME_PRINT directly: it runs RESUME_BASE and skips the purge, because
PAUSE did not park. A manual Resume during a soak still goes through AFC.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-04 02:15:18 +01:00
1 parent 1fc4b26366
commit e540e40cf7
2 files changed
+7 -1

No files matched your search

+2
View File
@@ -4,6 +4,8 @@
# PAUSE -> AFC_PAUSE (saves position, z-hop) -> this PAUSE -> PAUSE_BASE
# RESUME -> AFC_RESUME -> this RESUME -> HEAT_SOAK_RESUME -> _RESUME_PRINT
# -> RESUME_BASE, then AFC restores the saved position
# A finished HEAT_SOAK calls _RESUME_PRINT directly: AFC saved no position for
# its pause, so AFC_RESUME would send the toolhead to X0 Y0.
# RESUME is defined only here: heating/heat_soak.cfg used to define its own,
# which replaced this one completely (no unretract, no fan restore).
# After a PAUSE, _RESUME_PRINT purges into the Blobifier with the purge check