HEAT_SOAK: resume without AFC, no trip to X0 Y0

A finished soak called RESUME, which goes through AFC_RESUME. HEAT_SOAK pauses
with PAUSE_BASE, so AFC has no saved position and restores 0,0: the toolhead
went to X0 Y0 at Z5 at up to 350 mm/s (AFC.log, 2026-11-04), and _Z_CHECK then
moved straight back. Both nozzle guard stops in z_check (delta -34 and -33)
happened in runs like this, with the toolhead front left. The exact source of
the force is unknown.

Call _RESUME_PRINT directly: it runs RESUME_BASE and skips the purge, because
PAUSE did not park. A manual Resume during a soak still goes through AFC.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-04 02:15:18 +01:00
1 parent 1fc4b26366
commit e540e40cf7
2 files changed
+7 -1

No files matched your search

+5 -1
View File
@@ -293,8 +293,12 @@ gcode:
{% if heat_soak.complete %}
{heat_soak.complete}
{% endif %}
# Not RESUME: that goes through AFC_RESUME, which restores AFC's saved
# position. HEAT_SOAK pauses with PAUSE_BASE, so AFC saved nothing and
# (seen 2026-11-04) sends the toolhead to X0 Y0 at up to 350 mm/s, just
# before the _Z_CHECK guard arms.
{% if printer['pause_resume'].is_paused %}
RESUME
_RESUME_PRINT
{% endif %}
{% endif %}
{% else %}