- ESP32: NanoFlashBridge on TCP port 2323. A connection power cycles the
Nano into its bootloader and bridges TCP <-> Serial2 at 57600 baud; the
clock pauses during the session, 10 s idle timeout
- tools/nano_net_upload.py: STK500v1 uploader over TCP (standard library
only), with sync retries, write and read-back verification. avrdude 6.3
net: ports are broken on Windows, so avrdude is not used
- New nano_ota environment: pio run -e nano_ota -t upload
- README: usage, requirements, troubleshooting; TODO for hardware test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New native environment: pio test -e native
- test/mocks: fake Arduino core, EEPROM and recording BROSE9323 driver
- test/test_nano: 25 tests covering every command, bitmaps, bad input,
flip time storage and the periodic full redraw
- Board environments ignore tests so they are never uploaded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Shared BROSE9323 driver in lib/, ESPSERIAL selected via build_flags
- Nano firmware in src/nano, ESP32 firmware in src/esp32
- Move WiFi/MQTT credentials to gitignored secrets.h (template provided)
- Pin home-assistant-integration to 2.1.0 from the registry
- Add esp32_usb environment for first flash / recovery
- Add READMEs and CLAUDE.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5