Files
openhmi-nx/README.md
T
mangavalkandClaude Opus 5.5 842591a14c Render QR codes pixel-exact with an own encoder
nxhmi.qr is a dependency-free QR encoder. Measured in the Editor
simulator: numeric/alphanumeric/byte mode by content, level L, mask 0,
smallest version; scaled to w - 2*dis by width (not clipped to h), last
column run one pixel narrower, logo centred, nothing when too small.
Basic rendering is now 20/20 pixel-exact.

Also: unknown component kinds give a clean CLI error instead of a
traceback.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 16:17:23 +01:00

133 lines
6.4 KiB
Markdown

# openhmi-nx
Open-source tools for **Nextion HMI projects**: decode, edit, encode and render `.HMI` files
without Nextion Editor -- and, as research in progress, compile `.tft` firmware.
- decode a project into readable JSON + text (diff it, review it, keep it in git) and encode it back
- create projects, pages, components, pictures and fonts (rasterized from any TrueType font) from code
- render pages to PNG, matching the Editor's canvas pixel for pixel for nearly every component
- verify every checksum in a project
The file format, including its checksums, is documented in [docs/FORMAT.md](docs/FORMAT.md). It
was worked out black-box -- by editing projects in Nextion Editor and comparing the files it
writes; no Nextion software was decompiled.
> Not affiliated with or endorsed by Nextion / ITEAD. "Nextion" is their trademark.
![demo home page rendered by nxhmi](demo/render/home.png)
## Status
Every percentage is a count with a stated basis, so it can be checked (details in
[docs/COVERAGE.md](docs/COVERAGE.md)).
| Area | Coverage | Basis |
|---|---|---|
| `.HMI` read / write / build from scratch | **100 %** of everything seen | every entry type in Editor-written files round-trips byte-identical; new projects open in the Editor |
| Checksums (`.HMI`) | **100 %** (3/3) | page, project header, file table |
| Component types (read, write, create) | **100 %** (31/31) | all types in the Editor's toolbox, incl. 11 Intelligent-only |
| Display series | **40 %** (2/5) | Basic (T) and Intelligent (P) confirmed; Discovery, Enhanced, Edge not sampled |
| Picture formats | **50 %** (1/2) | raw RGB565 (Basic) done; compressed format (Intelligent) not yet |
| Font modes | **50 %** (1/2) | black/white done (incl. TrueType import); anti-aliased not yet |
| Readable attribute names in JSON | **65 %** (20/31 types) | value lists taken from the Editor for all Basic types; Intelligent-only types still raw numbers |
| Rendering, Basic components | **100 %** (20/20 pixel-exact) | incl. gauges and QR codes (own encoder, no dependencies) |
| Rendering, all components | **65 %** (20/31 pixel-exact) | Intelligent-only components not rendered yet |
| `.tft` compilation | **31 %** (2.5/8 milestones) | layout mapped, layout table decoded, trailer checksum (same-length edits only); not usable yet |
## Compatibility
Everything here was reverse-engineered and verified against **Nextion Editor 1.68.2 (build
1.68.2.3035)** on Windows; `nxhmi.TESTED_EDITOR_VERSION` holds that version. Files written by nxhmi
open in that Editor, and the test fixture is a project re-saved by it.
- Older projects (tested with one saved by an older Editor in 2019) read and round-trip fine; when
1.68.2 re-saves them it upgrades a few header bytes (see docs/FORMAT.md).
- **After a Nextion Editor update**: open `demo/demo.HMI` in the new Editor, File > Save As, and
compare it with `tests/fixtures/demo_editor_saved.HMI` (e.g. `python -m nxhmi info` on both, or
replace the fixture and run the tests). If anything differs, the format changed -- please open
an issue with the Editor version.
## Install
Python 3.9+. Pillow is only needed for pictures, font generation and rendering.
```
pip install -e . # or run with PYTHONPATH=src
pip install pillow # optional
```
## Command line
```
python -m nxhmi info project.HMI # entries, pages, checksum status
python -m nxhmi verify project.HMI # check every checksum
python -m nxhmi decode project.HMI folder/ # -> manifest.json, Program.s, pages/*.json, resources/
python -m nxhmi encode folder/ new.HMI # folder -> fresh .HMI
python -m nxhmi dump project.HMI --page home # one page as JSON
python -m nxhmi set project.HMI home title txt "Hello"
python -m nxhmi add project.HMI home button x=10 y=60 w=120 h=40 txt=Hi --name bHi
python -m nxhmi new-page project.HMI settings
python -m nxhmi add-picture project.HMI logo.png
python -m nxhmi add-font project.HMI DejaVuSans.ttf 24
python -m nxhmi render project.HMI pngs/ # one PNG per page
python -m nxhmi kinds # component kinds for `add`
```
## Use with Claude
The repo is set up for Claude (Claude Code, Claude Desktop or any MCP client):
- **MCP server** -- `python -m nxhmi.mcp_server` (stdio, no dependencies). Tools: `info`,
`get_page`, `set_attributes`, `set_event`, `add_component`, `remove_component`, `add_page`,
`new_project`, `add_picture`, `add_font`, `verify`, `list_kinds`, `schema`, and
**`render_page`, which returns the page as an image** so the model can see what it built.
Attribute values can be readable names (`"xcen": "center"`, `"bco": "#ff0000"`).
`.mcp.json` registers it automatically when Claude Code runs in this repo; elsewhere add:
```json
{"mcpServers": {"nxhmi": {"command": "python", "args": ["-m", "nxhmi.mcp_server"],
"env": {"PYTHONPATH": "/path/to/openhmi-nx/src"}}}}
```
- **Skill** -- [.claude/skills/nextion-hmi/SKILL.md](.claude/skills/nextion-hmi/SKILL.md): the
edit -> verify -> render loop, value names, fonts/pictures, event code, limits.
- **Machine-readable CLI** -- `info --json`, `schema <kind>`, `dump --page`.
## Python
```python
from nxhmi import project, fonts, components as C
from nxhmi.render import Renderer
h = project.new_project("NX4832T035_011", "home") # no Nextion files needed
font = project.add_font(h, fonts.from_ttf(None, 24)) # None = Pillow's bundled CC0 font
page = project.add_page(h, "settings")
C.add(page, "button", x=10, y=10, w=140, h=40, txt="back", font=font,
events={"codesup": ["page home"]})
h.write("1.pa", page.pack())
h.save("my.HMI") # opens in Nextion Editor
Renderer(h).render("settings").save("settings.png")
```
## Demo
`demo/` is generated by [examples/make_demo.py](examples/make_demo.py): a 3-page project
(`demo.HMI`), its decoded form (`decoded/`) and renders (`render/`). Nextion Editor re-saves it
byte for byte unchanged -- that re-save is the test fixture in `tests/fixtures/`.
## Tests
```
python -m unittest discover -s tests
```
## Credits
[Nextion2Text](https://github.com/MMMZZZZ/Nextion2Text) (MPL-2.0) first documented the page record
layout (read-only); [nextion-font-editor](https://github.com/hagronnestad/nextion-font-editor)
documented older font versions. This is an independent implementation.
## License
MIT, see [LICENSE](LICENSE).