sync with real config parameters from sources
This commit is contained in:
marschap
@@ -148,7 +148,7 @@ Brightness=255
|
||||
# This value is used when the display is normally
|
||||
# switched off in case LCDd is inactive
|
||||
OffBrightness=0
|
||||
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600 or 19200]
|
||||
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200i or 115200]
|
||||
Speed=9600
|
||||
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
|
||||
NewFirmware=no
|
||||
@@ -165,7 +165,7 @@ Reboot=no
|
||||
Device=/dev/ttyS0
|
||||
# Select the LCD type (size) [default: 16x2]
|
||||
Size=16x2
|
||||
# Set the initial contrast [default: 140; legal: 0 - 1000]
|
||||
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
||||
Contrast=140
|
||||
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
||||
Brightness=1000
|
||||
@@ -193,7 +193,7 @@ Model=635
|
||||
Device=/dev/ttyUSB0
|
||||
# Select the LCD size [default: depending on model: 635: 20x4, 631 & 633: 16x2]
|
||||
Size=20x4
|
||||
# Set the initial contrast [default: 140; legal: 0 - 1000]
|
||||
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
||||
Contrast=350
|
||||
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
||||
Brightness=1000
|
||||
@@ -217,19 +217,19 @@ Reboot=yes
|
||||
|
||||
# color settings
|
||||
# foreground color [default: blue]
|
||||
foreground=blue
|
||||
Foreground=blue
|
||||
# background color [default: cyan]
|
||||
background=cyan
|
||||
Background=cyan
|
||||
# backlight color [default: red]
|
||||
backlight=red
|
||||
Backlight=red
|
||||
|
||||
# display size [default: 20x4]
|
||||
size=20x4
|
||||
Size=20x4
|
||||
|
||||
# What position (X,Y) to start the left top corner at...
|
||||
# Default: (7,7)
|
||||
topleftx=7
|
||||
toplefty=7
|
||||
TopLeftx=7
|
||||
TopLefty=7
|
||||
|
||||
|
||||
|
||||
@@ -255,10 +255,10 @@ Reboot=no
|
||||
Keypad=yes
|
||||
|
||||
# If you have a non standard keypad you can associate any keystrings to keys.
|
||||
# There are 6 input key in the CwLnx hardware that generate caracter
|
||||
# There are 6 input key in the CwLnx hardware that generate characters
|
||||
# from 'A' to 'F'.
|
||||
#
|
||||
# The following it the build in default mapping hardcoded in the driver.
|
||||
# The following it the built-in default mapping hardcoded in the driver.
|
||||
# You can leave those unchanged if you have a standard keypad.
|
||||
# You can change it if you want to report other keystrings or have a non
|
||||
# standard keypad.
|
||||
@@ -275,6 +275,55 @@ Keypad=yes
|
||||
|
||||
|
||||
|
||||
## glcdlib meta driver for graphical LCDs ##
|
||||
[glcdlib]
|
||||
|
||||
## mandatory:
|
||||
|
||||
# which graphical display supported by graphlcd-base to use [default: image]
|
||||
# (see /etc/graphlcd.conf for possible drivers)
|
||||
Driver=noritake800
|
||||
|
||||
# no=use graphlcd bitmap fonts (they have only one size / font file)
|
||||
# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
|
||||
UseFT2=yes
|
||||
|
||||
# text resolution in fixed width characters [default: 16x4]
|
||||
# (if it won't fit according to available physical pixel resolutioni
|
||||
# and the minimum available font face size in pixels, then
|
||||
# 'DebugBorder' will automatically be turned on)
|
||||
TextResolution=20x4
|
||||
|
||||
# path to font file to use
|
||||
FontFile=/usr/share/fonts/corefonts/courbd.ttf
|
||||
|
||||
|
||||
## these only apply if UseFT2=yes:
|
||||
|
||||
# character encoding to use
|
||||
CharEncoding=iso8859-2
|
||||
|
||||
# minumum size in pixels in which fonts should be rendered
|
||||
MinFontFaceSize=7x12
|
||||
|
||||
|
||||
## optional:
|
||||
Brightness=50 # Brightness (in %) if applicable
|
||||
Contrast=50 # Contrast (in %) if applicable
|
||||
Backlight=no # Backlight if applicable
|
||||
UpsideDown=no # flip image upside down
|
||||
Invert=no # invert light/dark pixels
|
||||
ShowDebugFrame=no # turns on/off 1 pixel thick debugging
|
||||
# border whithin the usable text area,
|
||||
# for setting up TextResolution and
|
||||
# MinFontFaceSize (if using FT2);
|
||||
ShowBigBorder=no # border around the unused area
|
||||
ShowThinBorder=yes # border around the unused area
|
||||
PixelShiftX=0
|
||||
PixelShiftY=2
|
||||
|
||||
|
||||
|
||||
## Matrix Orbital GLK driver ##
|
||||
[glk]
|
||||
|
||||
@@ -310,7 +359,7 @@ Backlight=no
|
||||
|
||||
# If you have the additional output port ("bargraph") and you want to
|
||||
# be able to control it with the lcdproc OUTPUT command
|
||||
Outputport=no
|
||||
OutputPort=no
|
||||
|
||||
# Specifies if the last line is pixel addressable or it controls an
|
||||
# underline effect. [default: true (= pixel addressable); legal: yes, no]
|
||||
@@ -374,6 +423,17 @@ Size=20x4
|
||||
|
||||
|
||||
|
||||
## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
|
||||
[imon]
|
||||
|
||||
# select the device to use
|
||||
Device=/dev/lcd0
|
||||
|
||||
# display dimensions
|
||||
Size=16x2
|
||||
|
||||
|
||||
|
||||
## IrMan driver ##
|
||||
[IrMan]
|
||||
#if in trouble with IrMan, try Lirc emulator for IrMan
|
||||
@@ -409,7 +469,7 @@ Device=/dev/lcd
|
||||
# Set the initial brightness [default: 255; legal: 0 - 255]
|
||||
Brightness=255
|
||||
|
||||
# Set the communication speed [default: 19200; legal: 2400, 9600]
|
||||
# Set the communication speed [default: 9600; legal: 2400, 9600]
|
||||
Speed=9600
|
||||
|
||||
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
||||
@@ -444,7 +504,7 @@ MainMenuKey=RightKey
|
||||
## HNE LCTerm driver ##
|
||||
[lcterm]
|
||||
Device=/dev/ttyS1
|
||||
size=16x2
|
||||
Size=16x2
|
||||
|
||||
|
||||
|
||||
@@ -488,26 +548,26 @@ Reboot=no
|
||||
[MtxOrb]
|
||||
|
||||
# Select the output device to use [default: /dev/lcd]
|
||||
device=/dev/ttyS0
|
||||
Device=/dev/ttyS0
|
||||
|
||||
# Set the display size [default: 20x4]
|
||||
size=20x4
|
||||
Size=20x4
|
||||
|
||||
# Switch on the backlight? [default: yes]
|
||||
# NOTE: The driver will ignore this if the display is a vfd or vkd
|
||||
# as they crash if the backlight is turned off
|
||||
enablebacklight=yes
|
||||
Backlight=yes
|
||||
|
||||
# Set the initial contrast [default: 140]
|
||||
# Set the initial contrast [default: 480]
|
||||
# NOTE: The driver will ignore this if the display
|
||||
# is a vfd or vkd as they don't have this feature
|
||||
contrast=800
|
||||
Contrast=800
|
||||
|
||||
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
|
||||
speed=19200
|
||||
Speed=19200
|
||||
|
||||
# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
|
||||
type=lkd
|
||||
Type=lkd
|
||||
|
||||
# The following table translate from MtxOrb Key to Logical Key.
|
||||
# See [input] section for an explanation of the key mappings
|
||||
@@ -530,21 +590,27 @@ keypad_test_mode=no
|
||||
|
||||
## Noritake VFD driver ##
|
||||
[NoritakeVFD]
|
||||
# Port where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
|
||||
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
|
||||
Device=/dev/ttyS0
|
||||
|
||||
# Specifies the size of the LCD.
|
||||
Size=20x4
|
||||
|
||||
Contrast=255
|
||||
# set the serial port speed [default: 9600]
|
||||
# set the brightness
|
||||
Brightness=255
|
||||
|
||||
# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
|
||||
Speed=9600
|
||||
|
||||
# re-initialize VFD ?
|
||||
#Reboot=yes
|
||||
|
||||
|
||||
|
||||
## Pyramid pylcd driver ##
|
||||
[pylcd]
|
||||
|
||||
# device to connect to [default: /dev/lcd]
|
||||
Device=/dev/ttyUSB0
|
||||
|
||||
|
||||
@@ -572,30 +638,30 @@ Port=0x378
|
||||
## Serial VFD driver ##
|
||||
## Drives various (see below) serial 5x7dot VFD's. ##
|
||||
[serialVFD]
|
||||
# Port where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
|
||||
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
|
||||
Device=/dev/ttyS1
|
||||
|
||||
# Specifies the size of the VFD.
|
||||
Size=20x2
|
||||
|
||||
# Specifies the displaytype.[default: 0]
|
||||
# Specifies the display type [default: 0]
|
||||
# 0 NEC (FIPC8367 based) VFDs.
|
||||
# 1 KD Rev 2.1.
|
||||
# 2 Noritake VFDs (*).
|
||||
# 3 Futaba VFDs (*).
|
||||
# (* most should work, not testet yet.)
|
||||
Displaytype=1
|
||||
Type=1
|
||||
|
||||
# Display brightness [default: 255].
|
||||
# 0 min ... 255 max ... 1000 also max
|
||||
# (4 steps 0-64, 65-128, 129-192, 193-1000)
|
||||
Brightness=255
|
||||
|
||||
# set the serial port speed [default: 9600]
|
||||
# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
|
||||
Speed=9600
|
||||
|
||||
# enable ISO 8859 1 compatibility [default: 1]
|
||||
#ISO_8859_1=1
|
||||
# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
|
||||
ISO_8859_1=yes
|
||||
|
||||
|
||||
|
||||
@@ -633,7 +699,7 @@ OffBrightness=500
|
||||
## Text driver ##
|
||||
[text]
|
||||
# Set the display size [default: 20x4]
|
||||
size=20x4
|
||||
Size=20x4
|
||||
|
||||
|
||||
|
||||
@@ -649,7 +715,7 @@ Port=0x378
|
||||
# Is ECP mode on? [default: yes; legal: yes, no]
|
||||
#ECPlpt=yes
|
||||
|
||||
# Use graphic? [default: no; legal: yes, no]
|
||||
# Use graphics? [default: no; legal: yes, no]
|
||||
#graphic=no
|
||||
|
||||
|
||||
@@ -661,10 +727,33 @@ Port=0x378
|
||||
Device=/dev/lcd
|
||||
|
||||
# Set the communication speed [default: 9600; legal: 4800, 9600]
|
||||
Speed=19200
|
||||
Speed=9600
|
||||
|
||||
# set display size [default: 16x2]
|
||||
Size=160x2
|
||||
Size=16x2
|
||||
|
||||
|
||||
|
||||
## ELV ula200 driver ##
|
||||
[ula200]
|
||||
|
||||
# Select the LCD size [default: 20x4]
|
||||
Size=20x4
|
||||
|
||||
# If you have a non standard keypad you can associate any keystrings to keys.
|
||||
# There are 6 input key in the CwLnx hardware that generate characters
|
||||
# from 'A' to 'F'.
|
||||
#
|
||||
# The following it the built-in default mapping hardcoded in the driver.
|
||||
# You can leave those unchanged if you have a standard keypad.
|
||||
# You can change it if you want to report other keystrings or have a non
|
||||
# standard keypad.
|
||||
# KeyMap_A=Up
|
||||
# KeyMap_B=Down
|
||||
# KeyMap_C=Left
|
||||
# KeyMap_D=Right
|
||||
# KeyMap_E=Enter
|
||||
# KeyMap_F=Escape
|
||||
|
||||
|
||||
|
||||
@@ -679,63 +768,6 @@ Speed=19200
|
||||
|
||||
|
||||
|
||||
## glcdlib meta driver for graphical LCDs ##
|
||||
[glcdlib]
|
||||
|
||||
## mandatory:
|
||||
|
||||
# which graphical display supported by graphlcd-base to use
|
||||
# (see /etc/graphlcd.conf for possible drivers)
|
||||
Driver=noritake800
|
||||
|
||||
# no=use graphlcd bitmap fonts (they have only one size / font file)
|
||||
# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
|
||||
UseFT2=yes
|
||||
|
||||
# text resolution in fixed width characters (if it won't fit according
|
||||
# to available physical pixel resolution and the minimum available font
|
||||
# face size in pixels, 'DebugBorder' will automatically be turned on)
|
||||
TextResolution=20x4
|
||||
|
||||
# path to font file to use
|
||||
FontFile=/usr/share/fonts/corefonts/courbd.ttf # path to font file to use
|
||||
#FontFile=/fonts/f8b.fnt # path to font file to use
|
||||
|
||||
|
||||
## these only apply if UseFT2=yes:
|
||||
|
||||
# character encoding to use
|
||||
CharEncoding=iso8859-2
|
||||
|
||||
# minumum size in pixels in which fonts should be rendered
|
||||
MinFontFaceSize=7x12
|
||||
|
||||
|
||||
## optional:
|
||||
Brightness=50 # Brightness (in %) if applicable
|
||||
Contrast=50 # Contrast (in %) if applicable
|
||||
Backlight=no # Backlight if applicable
|
||||
UpsideDown=no # flip image upside down
|
||||
Invert=no # invert light/dark pixels
|
||||
ShowDebugFrame=no # turns on/off 1 pixel thick debugging
|
||||
# border whithin the usable text area,
|
||||
# for setting up TextResolution and
|
||||
# MinFontFaceSize (if unsing FT2);
|
||||
ShowBigBorder=no # border around the unused area
|
||||
ShowThinBorder=yes # border around the unused area
|
||||
PixelShiftX=0
|
||||
PixelshiftY=2
|
||||
|
||||
|
||||
|
||||
## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
|
||||
[imon]
|
||||
|
||||
Size=16x2
|
||||
Device=/dev/lcd0
|
||||
|
||||
|
||||
|
||||
## OnScreen Display using libxosd ##
|
||||
[xosd]
|
||||
|
||||
|
||||
Reference in New Issue
Block a user