Forgot to commit new key stuff in config file.

LCDd.conf

@@ -6,20 +6,22 @@
 # markers that look like [section]. Comments are all line-based comments,
 # and are lines that start with '#' or ';'.
 #
-# The server has a 'central' section named [server]. Further each driver 
-# has a section which defines how the driver acts.
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
 #
 # The drivers are activated by specifiying them in a driver= line in the
 # server section, like:
 #
 #   Driver=curses
 #
-# This tells LCDd to use the curses driver. The first driver that is
-# loaded and is capable of output becomes 'the' output driver.
-# All extra drivers can only serve as input.
-# The default driver to use is curses.
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If -d is specified on the command line, the Driver= options in the 
+# config file are ignored.
 #
-# The drivers can read their own options from the config file, but most of
+# The drivers can read their own options from the config file, but some of
 # them don't do this yet. They expect 'command-line'-format parameters that
 # were previously placed on the command line. These parameters can be
 # given to the driver in the following way:
@@ -33,8 +35,6 @@
 #   -d <driver> "<driverargs>"
 #
 # Note that the -d option still works, but not allows driverargs anymore.
-# If -d is specified on the command line, the Driver= options in the 
-# config file are ignored.
 
 
 [server]
@@ -81,15 +81,42 @@ DriverPath=server/drivers/
 # Where can we find the driver modules ?
 # Always place a slash as last character !
 
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
 
 [menu]
-# The menu section. You can configure what keys the menu should use.
-# Note that only the menukey will be reserved exclusively.
+# The menu section. The menu is an internal LCDproc client.
+# You can configure what keys the menu should use. Note that only the menukey
+# will be reserved exclusively, the others in shared mode.
+
+# The following works excelent with 4 keys or more.
 MenuKey=Escape
 EnterKey=Enter
 UpKey=Up
 DownKey=Down
 
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
 
 # Driver sections are below this line, in alphabetical order
 
@@ -194,7 +221,6 @@ Arguments="-d /dev/ttyS0 -s 9600"
 
 [hd44780]
 # Hitachi HD44780 driver
-# See docs/hd44780_howto.txt
 
 Port=0x378
 # Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC