mangavalk/lcdproc
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Change some descriptions so Config::Model can parse them more reliable (D. Dumont).

Browse Source
This commit is contained in:
mmdolze
2011-11-07 06:49:07 +00:00
parent eaa3f83515
commit 641d1f0931
1 changed files with 66 additions and 56 deletions
Download Patch File Download Diff File Expand all files Collapse all files
LCDd.conf
+66 -56
View File
@@ -106,45 +106,33 @@ WaitTime=5
#TitleSpeed=10
# The "...Key=" lines define what the server does with keypresses that
# don't go to any client.
# These are the defaults:
# don't go to any client. The ToggleRotateKey stops rotation of screens, while
# the PrevScreenKey and NextScreenKey go back / forward one screen (even if
# rotation is disabled.
# Assign the key string returned by the driver to the ...Key setting. These
# are the defaults:
ToggleRotateKey=Enter
PrevScreenKey=Left
NextScreenKey=Right
#ScrollUpKey=Up
#ScrollDownKey=Down
# If you have only 4 keys, you can choose to use this:
#ToggleRotateKey=Enter
#PrevScreenKey=Up
#NextScreenKey=Down
# If you have only 3 keys, you can choose to use this:
#ToggleRotateKey=Enter
#PrevScreenKey=Up
## The menu section. The menu is an internal LCDproc client. ##
[menu]
# You can configure what keys the menu should use. Note that the MenuKey
# will be reserved exclusively, the others work in shared mode.
# The following works excellent with 4 keys or more.
# Up to six keys are supported. The MenuKey (to enter and exit the menu), the
# EnterKey (to select values) and at least one movement keys are required.
# These are the default key assignments:
MenuKey=Escape
EnterKey=Enter
UpKey=Up
DownKey=Down
# If you have 6 keys you may define these as well
#LeftKey=Left
#RightKey=Right
# If you have only 3 keys, you could use something like this:
#MenuKey=Escape
#EnterKey=Enter
#DownKey=Down
### Driver sections are below this line, in alphabetical order ###
@@ -175,7 +163,8 @@ Brightness=1000
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=0
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200,
# 115200]
Speed=9600
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
NewFirmware=no
@@ -222,7 +211,7 @@ Reboot=yes
#Size=20x4
# Override the default communication speed known for the selected model.
# [default: depending on model; legal: 19200, 115200]
# Default value depends on model [legal: 19200, 115200]
#Speed=115200
@@ -246,7 +235,7 @@ Size=20x4
TopLeftX=7
TopLeftY=7
# use ASC symbols for icons & bars [default: no; legal, yes, no]
# use ASC symbols for icons & bars [default: no; legal: yes, no]
UseACS=no
# draw Border [default: yes; legal: yes, no]
@@ -263,7 +252,10 @@ Model=12232
# Select the output device to use [default: /dev/lcd]
Device=/dev/ttyUSB0
# Select the LCD size [default: depending on model: 12232: 20x4, 12832: 21x4, 1602: 16x2]
# Select the LCD size. Default depends on model:
# 12232: 20x4
# 12832: 21x4
# 1602: 16x2
Size=20x4
# Set the communication speed [default: 19200; legal: 9600, 19200]
@@ -404,7 +396,8 @@ normal_font=/usr/local/lib/X11/fonts/TTF/andalemo.ttf
Driver=noritake800
# no=use graphlcd bitmap fonts (they have only one size / font file)
# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
# yes=use fonts supported by FreeType2 (needs Freetype2 support in
# libglcdprocdriver and its dependants)
UseFT2=yes
# text resolution in fixed width characters [default: 16x4]
@@ -461,7 +454,7 @@ Speed=19200
# Select what type of connection. See documentation for types.
ConnectionType=4bit
# Port where the LPT is [usual: 0x278, 0x378 and 0x3BC]
# Port where the LPT is. Usual value are: 0x278, 0x378 and 0x3BC
Port=0x378
# Device of the serial interface [default: /dev/lcd]
@@ -477,7 +470,7 @@ Keypad=no
# Set the initial contrast (bwctusb and lcd2usb) [default: 500; legal: 0 - 1000]
Contrast=0
# Set brightness of the backlight (lcd2usb only) [default: 0; legal 0 - 1000]
# Set brightness of the backlight (lcd2usb only) [default: 0; legal: 0 - 1000]
#Brightness=1000
#OffBrightness=0
@@ -488,9 +481,9 @@ Backlight=no
# be able to control it with the lcdproc OUTPUT command
OutputPort=no
# Specifies if the last line is pixel addressable or it controls an
# underline effect. [default: true (= pixel addressable); legal: yes, no]
#Lastline=true
# Specifies if the last line is pixel addressable (yes) or it controls an
# underline effect (no). [default: yes; legal: yes, no]
#Lastline=yes
# Specifies the size of the LCD.
# In case of multiple combined displays, this should be the total size.
@@ -500,7 +493,7 @@ Size=20x4
# Vspan=2,2 means both displays have 2 lines.
#vspan=2,2
# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible',
# set this flag to get into extended mode (4-line linear).
#ExtendedMode=yes
@@ -510,8 +503,9 @@ Size=20x4
# Character map to to map ISO-8859-1 to the LCD's character set
# [default: hd44780_default; legal: hd44780_default, hd44780_euro, ea_ks0073,
# sed1278f_0b, (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 if
# compiled with additional charmaps)]
# sed1278f_0b, hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 ]
# (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5 and upd16314 are possible if
# compiled with additional charmaps)
CharMap=hd44780_default
# If your display is slow and cannot keep up with the flow of data from
@@ -559,7 +553,7 @@ Device=/dev/ttyS1
# display dimensions
Size=20x4
# serial number [exactly as listed by usbview]
# serial number. Must be exactly as listed by usbview
# (if not given, the 1st IOWarrior found gets used)
#SerialNumber=00000674
@@ -567,9 +561,9 @@ Size=20x4
# set this flag to get into extended mode (4-line linear).
#ExtendedMode=yes
# Specifies if the last line is pixel addressable or it controls an
# underline effect. [default: true (= pixel addressable); legal: yes, no]
#Lastline=true
# Specifies if the last line is pixel addressable (yes) or it controls an
# underline effect (no). [default: yes; legal: yes, no]
#Lastline=yes
@@ -583,18 +577,24 @@ Device=/dev/lcd0
Size=16x2
# Character map to to map ISO-8859-1 to the displays character set.
# [default: none; legal: none, hd44780_euro, (upd16314, hd44780_koi8_r,
# hd44780_cp1251, hd44780_8859_5 if compiled with additional charmaps)]
# [default: none; legal: none, hd44780_euro, upd16314, hd44780_koi8_r,
# hd44780_cp1251, hd44780_8859_5 ] (upd16314, hd44780_koi8_r,
# hd44780_cp1251, hd44780_8859_5 are possible if compiled with additional
# charmaps)
CharMap=hd44780_euro
## Soundgraph iMON LCD ##
[imonlcd]
# Specify which iMon protocol should be used [legal: 0=15c2:ffdc device,
# 1=15c2:0038 device; default: 0]
# Specify which iMon protocol should be used
# [legal: 0, 1; default: 0]
# Choose 0 for 15c2:ffdc device,
# Choose 1 for 15c2:0038 device
Protocol=0
# Set the exit behavior [legal: 0=leave shutdown message, 1=show the big clock,
# 2=blank device; default: 1]
# Set the exit behavior [legal: 0-2; default: 1]
# 0 means leave shutdown message,
# 1 means show the big clock,
# 2 means blank device
#OnExit=2
# Select the output device to use [default: /dev/lcd0]
@@ -609,8 +609,9 @@ Contrast=200
# Set the backlight state [default: on; legal: on, off]
#Backlight=on
# Set the disc mode [legal: 0=spin the "slim" disc - two disc segments,
# 1=their complement spinning; default: 0]
# Set the disc mode [legal: 0,1; default: 0]
# 0 => spin the "slim" disc - two disc segments,
# 1 => their complement spinning;
#DiscMode=0
@@ -854,7 +855,8 @@ WaitAfterRefresh = 1000
## Noritake VFD driver ##
[NoritakeVFD]
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
# [default: /dev/lcd]
Device=/dev/ttyS0
# Specifies the size of the LCD.
Size=20x4
@@ -866,7 +868,8 @@ Brightness=1000
OffBrightness=50
# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
Speed=9600
# Set serial data parity [default: 0 (None), legal: 0(=none), 1(=odd), 2(=even)]
# Set serial data parity [default: 0; legal: 0-2 ]
# Meaning: 0(=none), 1(=odd), 2(=even)
Parity=0
# re-initialize the VFD [default: no; legal: yes, no]
Reboot=no
@@ -898,7 +901,7 @@ Brightness=1000
# Set the initial contrast [default: 1000; legal: 0 - 1000]
Contrast=1000
# Light the keys? i[default: on; legal: on, off]
# Light the keys? [default: on; legal: on, off]
Keylights=on
# If Keylights is on, the you can unlight specific keys below:
@@ -920,7 +923,8 @@ Key5Light=on
LircPort=8765
# Threshold in jiffies of synthesized gap that triggers flushing the IR data
# to lirc [default: 100 (6.1ms); legal: 16 - 32767; 0 to disable].
# to lirc [default: 100 ; max: 32767 ]
# 100 means 6.1ms. legal: 16 - 32767; Use 0 to disable.
LircFlushThreshold=100
@@ -981,7 +985,8 @@ Size=16x2
# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
Type=AEDEX
# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
# communication baud rate with the display [default: 9600; legal: 1200, 2400,
# 19200, 115200]
Speed=9600
@@ -1003,16 +1008,19 @@ Speed=9600
# (* most should work, not tested yet.)
Type=0
# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
# "no" if display connected serial, "yes" if connected parallel. [default: no]
# I.e. serial by default
use_parallel=no
# Number of Custom-Characters [default: display type dependent]
# Number of Custom-Characters. default is display type dependent
#Custom-Characters=0
# Portaddress where the LPT is. Used in parallel mode only. Usual values are 0x278, 0x378 and 0x3BC
# Portaddress where the LPT is. Used in parallel mode only. Usual values are
# 0x278, 0x378 and 0x3BC.
Port=0x378
# Set parallel port timing delay (us). Used in parallel mode only. [default: 2; legal: 0 - 255]
# Set parallel port timing delay (us). Used in parallel mode only.
# [default: 2; legal: 0 - 255]
#PortWait=2
# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
@@ -1078,7 +1086,8 @@ Device=/dev/ttyUSB0
## SVGAlib driver ##
[svga]
# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
# svgalib mode to use [default: G320x240x256 ]
# legal values are supported svgalib modes
#Mode=G640x480x256
# set display size [default: 20x4]
@@ -1169,7 +1178,8 @@ Size=20x4
# Select the output device to use [default: /dev/lcd]
Device=/dev/lcd
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200,
# 38400, 57600, 115200]
Speed=19200