update serialVFD driver to support more display types (Stefan Herdler)
This commit is contained in:
marschap
@@ -48,6 +48,7 @@ v.0.5dev (ongoing development)
|
||||
* CwLnx driver: support for CW12832
|
||||
+ new driver mx5000 for Logitech MX5000 keyboards (Christian Jodar)
|
||||
* update debian inits scripts to allow multiple instances of clients
|
||||
+ serialVFD driver: support for 4 more display types (Stefan Herdler)
|
||||
|
||||
v.0.5.2
|
||||
* fix switching on/off the Load screen in lcdproc client using the menu
|
||||
|
||||
@@ -863,6 +863,10 @@ Speed=9600
|
||||
# 1 KD Rev 2.1.
|
||||
# 2 Noritake VFDs (*).
|
||||
# 3 Futaba VFDs
|
||||
# 4 IEE S03601-95B
|
||||
# 5 IEE S03601-96-080 (*)
|
||||
# 6 Futaba NA202SD08FA (allmost IEE compatible)
|
||||
# 7 Samsung 20S207DA4 and 20S207DA6
|
||||
# (* most should work, not testet yet.)
|
||||
Type=0
|
||||
|
||||
@@ -875,6 +879,9 @@ use_parallel=no
|
||||
# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
|
||||
Port=0x378
|
||||
|
||||
# Set parallel port timingdelay (us). Used in parallelmode only. [default: 2; legal: 0 - 255]
|
||||
#PortWait=2
|
||||
|
||||
# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
|
||||
Device=/dev/ttyS1
|
||||
|
||||
|
||||
+1
-1
@@ -229,7 +229,7 @@ SED1330/SED1335 (aka S1D13300/S1D13305) based graphical displays
|
||||
122x32 pixel graphic displays based on SED1520 controllers
|
||||
.TP
|
||||
.B serialVFD
|
||||
NEC (FIPC8367 based) and FUTABA VFDs
|
||||
Text VFDs of various manufacturers, see LCDproc user-documentation for further details.
|
||||
.TP
|
||||
.B shuttleVFD
|
||||
Shuttle VFD (USB-based)
|
||||
|
||||
@@ -28,6 +28,7 @@ Feedback is welcome.
|
||||
<entry>Serial</entry>
|
||||
<entry>Parallel</entry>
|
||||
<entry>Display tested</entry>
|
||||
<entry><command>Type</command></entry>
|
||||
<entry>Remark</entry>
|
||||
</row>
|
||||
</thead>
|
||||
@@ -38,22 +39,25 @@ Feedback is welcome.
|
||||
<entry>Ok</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>0</entry>
|
||||
<entry> </entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>NEC FC20X2JA</entry>
|
||||
<entry>NEC FIPC8367</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)<footnote id="not_tested" label="1" > <para>Should work, but feature not tested yet.</para> </footnote> </entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>0</entry>
|
||||
<entry>Same Controller as on FM20X2KB-AB</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>NEC FC20X1SA-AB/AA</entry>
|
||||
<entry>NEC FIPC8367</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>0</entry>
|
||||
<entry>Same Controller as on FM20X2KB-AB</entry>
|
||||
</row>
|
||||
<row>
|
||||
@@ -62,59 +66,109 @@ Feedback is welcome.
|
||||
<entry>Ok</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>1, 0<footnote id="no_char" label="2" >
|
||||
<para>
|
||||
Custom-Characters are not supported with this <command>Type</command>, set <command>Custom-Characters=0</command>
|
||||
in <filename>LCDd.conf</filename>.
|
||||
</para>
|
||||
</footnote></entry>
|
||||
<entry> </entry>
|
||||
</row>
|
||||
|
||||
<row>
|
||||
<entry>FUTABA M402SD06GJ</entry>
|
||||
<entry>?</entry>
|
||||
<entry>(?)*</entry>
|
||||
<entry>(?)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>(* perhaps no compatible baudrate, not tested)
|
||||
The display has no user-characters: set <command>Custom-Characters=0</command>
|
||||
in <filename>LCDd.conf.</filename></entry>
|
||||
<entry>3</entry>
|
||||
<entry>The display has no user-characters.
|
||||
Serial interface with PC compatible baudrate is optional only, feature not tested.</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>FUTABA M204SD01AA</entry>
|
||||
<entry>FUTABA 5P00A016</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>3</entry>
|
||||
<entry> </entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>Samsung 20S204DA2</entry>
|
||||
<row>
|
||||
<entry>Futaba NA202SD08FA</entry>
|
||||
<entry>?</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>The display is FUTABA compatible (hard- and software). Set <command>Custom-Characters=0</command>
|
||||
in <filename>LCDd.conf.</filename> </entry>
|
||||
<entry>6</entry>
|
||||
<entry>allmost IEE compatible, no Custom-Characters</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>Samsung 20S204DA2 and 20S207DA1</entry>
|
||||
<entry>?</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>3<footnoteref linkend="no_char" />, 7<footnoteref linkend="no_char" /><footnoteref linkend="not_tested" /> </entry>
|
||||
<entry>The display is FUTABA compatible (hard- and software). Custom-Characters not supported(?). </entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>Samsung 20S207DA4 and 20S207DA6</entry>
|
||||
<entry>?</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>7, 3<footnoteref linkend="no_char" /></entry>
|
||||
<entry>allmost Futaba compatible</entry>
|
||||
</row>
|
||||
|
||||
<row>
|
||||
<entry>Noritake CU20026SCPB-T</entry>
|
||||
<entry>microcontroller</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>2</entry>
|
||||
<entry> </entry>
|
||||
|
||||
</row>
|
||||
<row>
|
||||
<entry>Noritake CU20045SCPB-T28A</entry>
|
||||
<entry>?</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)</entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>2</entry>
|
||||
<entry> </entry>
|
||||
</row>IEE 36657
|
||||
<row>
|
||||
<entry>IEE 36657-01 (= 02S-93290-VFD 36657-01)</entry>
|
||||
<entry>?</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Ok</entry>
|
||||
<entry>Yes</entry>
|
||||
<entry>4</entry>
|
||||
<entry> </entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>IEE S03601-95B</entry>
|
||||
<entry>?</entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>4</entry>
|
||||
<entry> </entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>IEE S03601-96-080</entry>
|
||||
<entry>?</entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>(Ok)<footnoteref linkend="not_tested" /></entry>
|
||||
<entry>No</entry>
|
||||
<entry>5</entry>
|
||||
<entry> </entry>
|
||||
</row>
|
||||
</tbody>
|
||||
</tgroup>
|
||||
</table>
|
||||
|
||||
<literal>(</literal>…<literal>)</literal>: Feature not tested.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
@@ -379,6 +433,16 @@ optional
|
||||
</para></listitem>
|
||||
</varlistentry>
|
||||
|
||||
<varlistentry>
|
||||
<term>
|
||||
<command>PortWait</command> =
|
||||
<arg choice="plain"><replaceable>DELAY</replaceable></arg>
|
||||
</term>
|
||||
<listitem><para>
|
||||
Set parallel port timingdelay (us). Used in parallelmode only. [default: <literal>2</literal>; legal: 0 - 255].
|
||||
</para></listitem>
|
||||
</varlistentry>
|
||||
|
||||
<varlistentry>
|
||||
<term>
|
||||
<command>Device</command> =
|
||||
@@ -450,6 +514,22 @@ Number of Custom-Characters [default: Display-<command>Type</command> dependent]
|
||||
<entry><literal>3</literal></entry>
|
||||
<entry>Futaba VFDs</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry><literal>4</literal></entry>
|
||||
<entry>IEE S03601-95B</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry><literal>5</literal></entry>
|
||||
<entry>IEE S03601-96-080</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry><literal>6</literal></entry>
|
||||
<entry>Futaba NA202SD08FA (allmost IEE compatible)</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry><literal>7</literal></entry>
|
||||
<entry>Samsung 20S207DA?</entry>
|
||||
</row>
|
||||
</tbody>
|
||||
</tgroup>
|
||||
</informaltable>
|
||||
|
||||
+40
-15
@@ -128,6 +128,8 @@ serialVFD_init (Driver *drvthis)
|
||||
p->ISO_8859_1 = 1;
|
||||
p->refresh_timer = 480;
|
||||
p->hw_brightness = 0;
|
||||
p->para_wait = DEFAULT_PARA_WAIT;
|
||||
|
||||
|
||||
debug(RPT_INFO, "%s(%p)", __FUNCTION__, drvthis);
|
||||
|
||||
@@ -197,14 +199,8 @@ serialVFD_init (Driver *drvthis)
|
||||
p->ISO_8859_1 = drvthis->config_get_bool(drvthis->name, "ISO_8859_1", 0, 1);
|
||||
|
||||
/* Which displaytype */
|
||||
tmp = drvthis->config_get_int(drvthis->name, "Type", 0, DEFAULT_DISPLAYTYPE);
|
||||
if ((tmp < 0) || (tmp > 3)) {
|
||||
report(RPT_WARNING, "%s: Type must be between 0 and 3; using default %d",
|
||||
drvthis->name, DEFAULT_DISPLAYTYPE);
|
||||
tmp = DEFAULT_DISPLAYTYPE;
|
||||
}
|
||||
p->display_type = tmp;
|
||||
|
||||
p->display_type = drvthis->config_get_int(drvthis->name, "Type", 0, DEFAULT_DISPLAYTYPE);
|
||||
|
||||
/* Number of custom characters */
|
||||
tmp = drvthis->config_get_int(drvthis->name, "Custom-Characters", 0, -83);
|
||||
if ((tmp < 0) || (tmp > 99)) {
|
||||
@@ -241,7 +237,26 @@ serialVFD_init (Driver *drvthis)
|
||||
memset(p->backingstore, 0, p->width * p->height);
|
||||
|
||||
//setup displayspecific data
|
||||
serialVFD_load_display_data(drvthis);
|
||||
memset(p->usr_chr_mapping, 0, 31);
|
||||
memset(p->usr_chr_load_mapping, 0, 31);
|
||||
if (serialVFD_load_display_data(drvthis) != 0) {
|
||||
report(RPT_WARNING, "%s: Type %d not defined; using default %d",
|
||||
drvthis->name, p->display_type, DEFAULT_DISPLAYTYPE);
|
||||
p->display_type = DEFAULT_DISPLAYTYPE;
|
||||
if (serialVFD_load_display_data(drvthis) != 0) {
|
||||
report(RPT_ERR, "%s: unable to load display_data", drvthis->name);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
/* parallel port wait */
|
||||
tmp = p->para_wait;
|
||||
p->para_wait = drvthis->config_get_int(drvthis->name, "PortWait", 0, p->para_wait);
|
||||
|
||||
if ((p->usr_chr_load_mapping[0] == 0) && (p->usr_chr_load_mapping[1] == 0)){ //this should not happen if usr_chr_load_mapping had been set
|
||||
memcpy(p->usr_chr_load_mapping, p->usr_chr_mapping, 31);
|
||||
}
|
||||
|
||||
|
||||
// report(RPT_ERR, "%s: Port: %X", drvthis->name, p->port, strerror(errno));
|
||||
|
||||
@@ -393,7 +408,7 @@ serialVFD_put_char (Driver *drvthis, int n)
|
||||
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->hw_cmd[set_user_char][1],\
|
||||
p->hw_cmd[set_user_char][0]);// substitute and select Character to overwrite
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, (unsigned char *) &p->usr_chr_mapping[n], 1);
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, (unsigned char *) &p->usr_chr_load_mapping[n], 1);
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->custom_char[n][0], p->usr_chr_dot_assignment[0]);// overwrite selected Character
|
||||
}
|
||||
|
||||
@@ -447,6 +462,11 @@ serialVFD_flush (Driver *drvthis)
|
||||
if (custom_char_changed[p->last_custom])
|
||||
p->last_custom = -10;
|
||||
|
||||
if (p->hw_cmd[mv_cursor][0] == 0) { // Workaround for Displays that doesn't support mv_cursor command
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->hw_cmd[pos1_cursor][1], p->hw_cmd[pos1_cursor][0]);
|
||||
last_chr = -1;
|
||||
}
|
||||
|
||||
for (i = 0; i < (p->height * p->width); i++) {
|
||||
|
||||
/* Backing-store implementation. If it's already
|
||||
@@ -454,16 +474,18 @@ serialVFD_flush (Driver *drvthis)
|
||||
*/
|
||||
|
||||
if ((p->framebuf[i] != p->backingstore[i]) ||
|
||||
((p->framebuf[i] <= 30) && (custom_char_changed[(int)p->framebuf[i]]))) {
|
||||
((p->framebuf[i] <= 30) && (custom_char_changed[(int)p->framebuf[i]] != 0))) {
|
||||
if (last_chr < i-1) { // if not last char written cursor has to be moved.
|
||||
if (last_chr < i-2-p->hw_cmd[mv_cursor][0]) {
|
||||
if (((p->hw_cmd[hor_tab][0] * (i-1-last_chr)) > (p->hw_cmd[mv_cursor][0]+1)) && (p->hw_cmd[mv_cursor][0] != 0)) {
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->hw_cmd[mv_cursor][1],
|
||||
p->hw_cmd[mv_cursor][0]);
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, (unsigned char *) &i, 1);
|
||||
//report(RPT_WARNING, "%s: move %d", drvthis->name, i);
|
||||
}
|
||||
else {
|
||||
for (j = last_chr; j < (i-1); j++)
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->hw_cmd[hor_tab][1], p->hw_cmd[hor_tab][0]);
|
||||
//report(RPT_WARNING, "%s: TAB %d", drvthis->name, j-last_chr);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -482,8 +504,8 @@ serialVFD_flush (Driver *drvthis)
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, (unsigned char *) &p->usr_chr_mapping[(int)p->framebuf[i]], 1);
|
||||
}
|
||||
}
|
||||
else if ((p->framebuf[i] > 127) && (p->ISO_8859_1 != 0)) { // ISO_8859_1 translation for 129 ... 255
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->charmap[p->framebuf[i] - 128], 1);
|
||||
else if ((p->framebuf[i] == 127) || ((p->framebuf[i] > 127) && (p->ISO_8859_1 != 0))) { // ISO_8859_1 translation for 129 ... 255
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->charmap[p->framebuf[i] - 127], 1);
|
||||
}
|
||||
else {
|
||||
Port_Function[p->use_parallel].write_fkt(drvthis, &p->framebuf[i], 1);
|
||||
@@ -493,8 +515,11 @@ serialVFD_flush (Driver *drvthis)
|
||||
}
|
||||
}
|
||||
|
||||
if (last_chr != -10) // update backingstore if something changed
|
||||
if (last_chr >= 0) { // update backingstore if something changed
|
||||
memcpy(p->backingstore, p->framebuf, p->height * p->width);
|
||||
//report(RPT_WARNING, "%s: memcpy", drvthis->name);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
@@ -44,6 +44,7 @@
|
||||
#define DEFAULT_BRIGHTNESS 140
|
||||
#define DEFAULT_SIZE "20x2"
|
||||
#define DEFAULT_DISPLAYTYPE 0
|
||||
#define DEFAULT_PARA_WAIT 2
|
||||
|
||||
|
||||
MODULE_EXPORT int serialVFD_init (Driver *drvthis);
|
||||
@@ -93,7 +94,8 @@ typedef struct driver_private_data {
|
||||
int predefined_vbar;
|
||||
int ISO_8859_1;
|
||||
unsigned int refresh_timer;
|
||||
unsigned char charmap[128];
|
||||
unsigned int para_wait;
|
||||
unsigned char charmap[129];
|
||||
int display_type; // display type
|
||||
int last_custom; // last custom character written
|
||||
unsigned char custom_char[31][7]; // stored custom characters
|
||||
@@ -101,6 +103,7 @@ typedef struct driver_private_data {
|
||||
unsigned char hw_cmd[10][4]; // hardwarespecific commands
|
||||
int usr_chr_dot_assignment[57]; // how to setup usercharacters
|
||||
unsigned int usr_chr_mapping[31];// where to place the usercharacters (0..30) in the asciicode
|
||||
unsigned int usr_chr_load_mapping[31];// needed for displays with different read and write mapping
|
||||
int hbar_cc_offset; // character offset of the bars
|
||||
int vbar_cc_offset; // character offset of the bars
|
||||
char info[255];
|
||||
|
||||
@@ -36,9 +36,13 @@ void serialVFD_load_NEC_FIPC (Driver *drvthis);
|
||||
void serialVFD_load_KD (Driver *drvthis);
|
||||
void serialVFD_load_Noritake (Driver *drvthis);
|
||||
void serialVFD_load_Futaba (Driver *drvthis);
|
||||
void serialVFD_load_IEE_95B (Driver *drvthis);
|
||||
void serialVFD_load_IEE_96 (Driver *drvthis);
|
||||
void serialVFD_load_Futaba_NA202SD08FA(Driver *drvthis);
|
||||
void serialVFD_load_Samsung (Driver *drvthis);
|
||||
|
||||
|
||||
void serialVFD_load_display_data(Driver *drvthis)
|
||||
int serialVFD_load_display_data(Driver *drvthis)
|
||||
{
|
||||
PrivateData *p = (PrivateData*) drvthis->private_data;
|
||||
switch (p->display_type) {
|
||||
@@ -54,7 +58,23 @@ void serialVFD_load_display_data(Driver *drvthis)
|
||||
case 3:
|
||||
serialVFD_load_Futaba(drvthis);
|
||||
break;
|
||||
case 4:
|
||||
serialVFD_load_IEE_95B(drvthis);
|
||||
break;
|
||||
case 5:
|
||||
serialVFD_load_IEE_96(drvthis);
|
||||
break;
|
||||
case 6:
|
||||
serialVFD_load_Futaba_NA202SD08FA(drvthis);
|
||||
break;
|
||||
case 7:
|
||||
serialVFD_load_Samsung(drvthis);
|
||||
break;
|
||||
default:
|
||||
return -1;
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
@@ -80,7 +100,7 @@ serialVFD_load_NEC_FIPC (Driver *drvthis)
|
||||
{1 ,0x02},
|
||||
{1 ,0x01}, // bright
|
||||
{1 ,0x0D}, // pos1
|
||||
{1 ,0x1B}, // move cursor
|
||||
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
||||
{1 ,0x0C}, // reset
|
||||
{2 ,0x14, 0x11}, // init
|
||||
{1 ,0x1A}, // set user char
|
||||
@@ -91,6 +111,7 @@ serialVFD_load_NEC_FIPC (Driver *drvthis)
|
||||
|
||||
// Translates ISO 8859-1 to display charset.
|
||||
const unsigned char charmap[] = {
|
||||
127, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
128, 129, 130, 131, 132, 133, 134, 135,
|
||||
136, 137, 138, 139, 140, 141, 142, 143,
|
||||
@@ -111,7 +132,7 @@ serialVFD_load_NEC_FIPC (Driver *drvthis)
|
||||
'e', 'e', 'e', 'e', 'i', 'i', 'i', 'i',
|
||||
'o', 'n', 'o', 'o', 'o', 'o', 0xA6, 0x8E,
|
||||
'0', 'u', 'u', 'u', 0xA7, 'y', 'p', 'y' };
|
||||
for (tmp = 0; tmp < 128; tmp++)
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
@@ -158,7 +179,7 @@ serialVFD_load_KD (Driver *drvthis)
|
||||
{1 ,0x02},
|
||||
{1 ,0x01}, // bright
|
||||
{1 ,0x0D}, // pos1
|
||||
{1 ,0x1B}, // move cursor
|
||||
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
||||
{1 ,0x0C}, // reset
|
||||
{2 ,0x14, 0x11}, // init
|
||||
{1 ,0x1A}, // set user char
|
||||
@@ -168,6 +189,7 @@ serialVFD_load_KD (Driver *drvthis)
|
||||
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
||||
|
||||
const unsigned char charmap[] = {
|
||||
127, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
128, 129, 130, 131, 132, 133, 134, 135,
|
||||
136, 137, 138, 139, 140, 141, 142, 143,
|
||||
@@ -188,7 +210,7 @@ serialVFD_load_KD (Driver *drvthis)
|
||||
0xC7, 0xC6, 0xC8, 0xD4, 0xCC, 0xCB, 0xCD, 0xCA,
|
||||
'o', 0xCF, 0xD1, 0xD0, 0xCE, 'o', 0xA6, 0xBB,
|
||||
0xD0, 0xD7, 0xD6, 0xD8, 0xA7, 'y', 'p', 'y' };
|
||||
for (tmp = 0; tmp < 128; tmp++)
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
@@ -235,7 +257,7 @@ serialVFD_load_Noritake (Driver *drvthis)
|
||||
{3 ,0x1B, 0x4C, 0x90},
|
||||
{3 ,0x1B, 0x4C, 0xFF}, // bright
|
||||
{1 ,0x0C}, // pos1
|
||||
{2 ,0x1B, 0x48}, // move cursor
|
||||
{2 ,0x1B, 0x48}, // move cursor (set to 0 if not supported)
|
||||
{2 ,0x1B, 0x49}, // reset
|
||||
{2 ,0x14, 0x11}, // init
|
||||
{2 ,0x1B, 0x43}, // set user char
|
||||
@@ -245,8 +267,8 @@ serialVFD_load_Noritake (Driver *drvthis)
|
||||
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
||||
|
||||
// no charmap needed
|
||||
for (tmp = 128; tmp <= 255; tmp++)
|
||||
p->charmap[tmp] = tmp;
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = tmp+127;
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
const int usr_chr_dot_assignment[57] = { 5,
|
||||
@@ -291,7 +313,7 @@ serialVFD_load_Futaba (Driver *drvthis)
|
||||
{2 ,0x04, 0x60},
|
||||
{2 ,0x04, 0xFF}, // bright
|
||||
{2 ,0x10, 0x00}, // pos1
|
||||
{1 ,0x10,}, // move cursor
|
||||
{1 ,0x10}, // move cursor (set to 0 if not supported)
|
||||
{1 ,0x1F}, // reset
|
||||
{2 ,0x11,0x14}, // init
|
||||
{1 ,0x03}, // set user char
|
||||
@@ -302,6 +324,7 @@ serialVFD_load_Futaba (Driver *drvthis)
|
||||
|
||||
// Translates ISO 8859-1 to display charset.
|
||||
const unsigned char charmap[] = {
|
||||
127, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
128, 129, 130, 131, 132, 133, 134, 135,
|
||||
136, 137, 138, 139, 140, 141, 142, 143,
|
||||
@@ -322,7 +345,7 @@ serialVFD_load_Futaba (Driver *drvthis)
|
||||
0x8A, 0x82, 0x88, 0x89, 0x8D, 0xA1, 0x8C, 0x8B,
|
||||
'o', 0xA4, 0x95, 0xA9, 0x93, 'o', 0x94, '/',
|
||||
'0', 0x97, 0xA3, 0x96, 0x81, 'y', 'p', 0x89 };
|
||||
for (tmp = 0; tmp < 128; tmp++)
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
@@ -342,3 +365,335 @@ serialVFD_load_Futaba (Driver *drvthis)
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
||||
}
|
||||
|
||||
|
||||
void
|
||||
serialVFD_load_IEE_95B (Driver *drvthis)
|
||||
{ //IEE_03601-95B_2x40_VFD
|
||||
PrivateData *p = (PrivateData*) drvthis->private_data;
|
||||
int tmp, w;
|
||||
|
||||
if (p->customchars == -83)
|
||||
p->customchars = 10; // number of custom characters the display provides
|
||||
p->vbar_cc_offset = 0; // character offset of the bars
|
||||
p->hbar_cc_offset = 0; // character offset of the bars
|
||||
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
||||
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
||||
p->para_wait = 60; // the display needs more delay in the parallelport mode
|
||||
|
||||
// hardwarespecific commands:
|
||||
// hw_cmd[Command][data] = {{commandlength , command 1},
|
||||
// .....
|
||||
// {commandlength , command N}}
|
||||
const char hw_cmd[10][4] = {{1 ,0x1C}, // dark
|
||||
{1 ,0x1D},
|
||||
{1 ,0x1E},
|
||||
{1 ,0x1F}, // bright
|
||||
{1 ,0x16}, // pos1
|
||||
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
||||
{1 ,0x15}, // reset
|
||||
{2 ,0x0E, 0x11}, // init
|
||||
{1 ,0x18}, // set user char
|
||||
{1 ,0x09}}; // tab
|
||||
for (tmp = 0; tmp < 10; tmp++)
|
||||
for (w = 0; w < 4; w++)
|
||||
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
||||
|
||||
|
||||
const unsigned char charmap[] = {
|
||||
0xEF, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
0x7F, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0xDF,
|
||||
0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
|
||||
0xE8, 0xE9, 0xBA, 0xBB, 0xBC, 0xBD, 0xBE, 0xBF,
|
||||
152, 153, 154, 155, 156, 157, 158, 159,
|
||||
/* #160 = 0xA0 */
|
||||
160, '!', 0xD3, '?', '?', 0x5C, 0x7C, '?',
|
||||
'"', '?', '?', '?', '?', '-', '?', '?',
|
||||
0xB9, 0xBA, '?', '?', 0x27, '?', '?', '.',
|
||||
',', '?', '?', '?', '?', '?', '?', '?',
|
||||
/* #192 = 0xC0 */
|
||||
0xB2, 0xA2, 0xA4, 'A', 0xA0, 0xA1, 0xA5, 0xA3,
|
||||
0xA7, 0xA6, 0xA8, 0xB4, 0xAB, 0xAA, 0xAC, 0xA9,
|
||||
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xAD, 'x',
|
||||
0xAF, 0xB7, 0xB6, 0xB8, 0xB5, 'Y', 'p', 0xB3,
|
||||
/* #224 = 0xE0 */
|
||||
0xD2, 0xC2, 0xC4, 'a', 0xC0, 0xC1, 0xC5, 0xC3,
|
||||
0xC7, 0xC6, 0xC8, 0xD4, 0xCB, 0xCA, 0xCC, 0xC9,
|
||||
'o', 0xCE, 0xD1, 0xD0, 0xDF, 'o', 0xAD, 0xBB,
|
||||
0xCF, 0xD7, 0xD6, 0xD8, 0xD5, 'y', 'p', 'y' };
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
const int usr_chr_dot_assignment[57] = { 6,
|
||||
0, 0, 0, 0,34,17, 3, 0,
|
||||
33,14, 4,23,30,13, 7, 0,
|
||||
29,10, 8,27,26, 9,11, 0,
|
||||
25, 6,12,31,22, 5,15, 0,
|
||||
21, 2,16,35,18, 1,19, 0,
|
||||
20,24,28,32, 0, 0, 0, 0 };
|
||||
for (tmp = 0; tmp < 57; tmp++)
|
||||
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
||||
|
||||
// Where to place the usercharacters (0..30) in the asciicode.
|
||||
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
||||
// (useful for displays with less then 30 usercharacters and predefined bars)
|
||||
const unsigned int usr_chr_mapping[31]=
|
||||
{0xFF, 0xFE, 0xFD, 0xFC, 0xFB, 0xFA, 0xF9, 0xF8, 0xF7, 0xF6};
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
||||
|
||||
// The following is only needet to set if the display needs a different setting
|
||||
// for loading the usercharacters.
|
||||
// Example: The character loaded to 0x00 will be shown at 0xFD.
|
||||
// usr_chr_load_mapping[0] or usr_chr_load_mapping[1] has to be != 0
|
||||
const unsigned int usr_chr_load_mapping[31]=
|
||||
{0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00};
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_load_mapping[tmp] = usr_chr_load_mapping[tmp];
|
||||
|
||||
}
|
||||
|
||||
void
|
||||
serialVFD_load_IEE_96 (Driver *drvthis)
|
||||
{ //IEE_03601-96_2x40_VFD
|
||||
PrivateData *p = (PrivateData*) drvthis->private_data;
|
||||
int tmp, w;
|
||||
|
||||
if (p->customchars == -83)
|
||||
p->customchars = 3; // number of custom characters the display provides
|
||||
p->vbar_cc_offset = 0; // character offset of the bars
|
||||
p->hbar_cc_offset = 0; // character offset of the bars
|
||||
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
||||
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
||||
p->para_wait = 60; // the display needs more delay in the parallelport mode
|
||||
|
||||
// hardwarespecific commands:
|
||||
// hw_cmd[Command][data] = {{commandlength , command 1},
|
||||
// .....
|
||||
// {commandlength , command N}}
|
||||
const char hw_cmd[10][4] = {{1 ,0x1C}, // dark
|
||||
{1 ,0x1D},
|
||||
{1 ,0x1E},
|
||||
{1 ,0x1F}, // bright
|
||||
{1 ,0x16}, // pos1
|
||||
{0 }, // move cursor (set to 0 if not supported)
|
||||
{1 ,0x15}, // reset
|
||||
{2 ,0x0E, 0x11}, // init
|
||||
{1 ,0x18}, // set user char
|
||||
{1 ,0x09}}; // tab
|
||||
for (tmp = 0; tmp < 10; tmp++)
|
||||
for (w = 0; w < 4; w++)
|
||||
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
||||
|
||||
|
||||
const unsigned char charmap[] = {
|
||||
0xEF, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
0x7F, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0xDF,
|
||||
0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
|
||||
0xE8, 0xE9, 0xBA, 0xBB, 0xBC, 0xBD, 0xBE, 0xBF,
|
||||
152, 153, 154, 155, 156, 157, 158, 159,
|
||||
/* #160 = 0xA0 */
|
||||
160, '!', 0xD3, '?', '?', 0x5C, 0x7C, '?',
|
||||
'"', '?', '?', '?', '?', '-', '?', '?',
|
||||
0xB9, 0xBA, '?', '?', 0x27, '?', '?', '.',
|
||||
',', '?', '?', '?', '?', '?', '?', '?',
|
||||
/* #192 = 0xC0 */
|
||||
0xB2, 0xA2, 0xA4, 'A', 0xA0, 0xA1, 0xA5, 0xA3,
|
||||
0xA7, 0xA6, 0xA8, 0xB4, 0xAB, 0xAA, 0xAC, 0xA9,
|
||||
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xAD, 'x',
|
||||
0xAF, 0xB7, 0xB6, 0xB8, 0xB5, 'Y', 'p', 0xB3,
|
||||
/* #224 = 0xE0 */
|
||||
0xD2, 0xC2, 0xC4, 'a', 0xC0, 0xC1, 0xC5, 0xC3,
|
||||
0xC7, 0xC6, 0xC8, 0xD4, 0xCB, 0xCA, 0xCC, 0xC9,
|
||||
'o', 0xCE, 0xD1, 0xD0, 0xDF, 'o', 0xAD, 0xBB,
|
||||
0xCF, 0xD7, 0xD6, 0xD8, 0xD5, 'y', 'p', 'y' };
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
const int usr_chr_dot_assignment[57] = { 6,
|
||||
0, 7, 0,26, 0, 8,17, 0,
|
||||
0, 9,18,28, 0,10,19, 0,
|
||||
1,11,20,30, 2,12,21, 0,
|
||||
3,13,22,32, 4,14,23, 0,
|
||||
5,15,24,34, 6,16,25, 0,
|
||||
27,29,31,33,35, 0, 0, 0 };
|
||||
for (tmp = 0; tmp < 57; tmp++)
|
||||
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
||||
|
||||
// Where to place the usercharacters (0..30) in the asciicode.
|
||||
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
||||
// (useful for displays with less then 30 usercharacters and predefined bars)
|
||||
const unsigned int usr_chr_mapping[31]=
|
||||
{0xFF, 0xFE, 0xFD};
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
||||
|
||||
// The following is only needet to set if the display needs a different setting
|
||||
// for loading the usercharacters.
|
||||
// Example: The character loaded to 0x00 will be shown at 0xFD.
|
||||
// usr_chr_load_mapping[0] or usr_chr_load_mapping[1] has to be != 0
|
||||
const unsigned int usr_chr_load_mapping[31]=
|
||||
{ 0x02, 0x01, 0x00};
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_load_mapping[tmp] = usr_chr_load_mapping[tmp];
|
||||
|
||||
}
|
||||
|
||||
void
|
||||
serialVFD_load_Futaba_NA202SD08FA (Driver *drvthis)
|
||||
{ //IEE_03601-96_2x40_VFD
|
||||
PrivateData *p = (PrivateData*) drvthis->private_data;
|
||||
int tmp, w;
|
||||
|
||||
//if (p->customchars == -83) // display doesn't support custom characters
|
||||
p->customchars = 0; // number of custom characters the display provides
|
||||
p->vbar_cc_offset = 5; // character offset of the bars
|
||||
p->hbar_cc_offset = 12; // character offset of the bars
|
||||
p->predefined_hbar = 1; // the display has predefined hbar-characters
|
||||
p->predefined_vbar = 1; // the display has predefined vbar-characters
|
||||
p->para_wait = 25; // the display needs more delay in the parallelport mode
|
||||
|
||||
// hardwarespecific commands:
|
||||
// hw_cmd[Command][data] = {{commandlength , command 1},
|
||||
// .....
|
||||
// {commandlength , command N}}
|
||||
const char hw_cmd[10][4] ={{2 ,0x04, 0x20}, // dark
|
||||
{2 ,0x04, 0x40},
|
||||
{2 ,0x04, 0x60},
|
||||
{2 ,0x04, 0xFF}, // bright
|
||||
{1 ,0x16}, // pos1
|
||||
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
||||
{1 ,0x15}, // reset
|
||||
{2 ,0x0E, 0x11}, // init
|
||||
{1 ,0x18}, // set user char
|
||||
{1 ,0x09}}; // tab
|
||||
for (tmp = 0; tmp < 10; tmp++)
|
||||
for (w = 0; w < 4; w++)
|
||||
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
||||
|
||||
|
||||
const unsigned char charmap[] = {
|
||||
127, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
128, 129, 130, 131, 132, 133, 134, 135,
|
||||
136, 137, 138, 139, 140, 141, 142, 143,
|
||||
144, 145, 146, 147, 148, 149, 150, 151,
|
||||
152, 153, 154, 155, 156, 157, 158, 159,
|
||||
/* #160 = 0xA0 */
|
||||
160, '!', 0xD3, 0x90, 0x9A, 'Y', 0x7C, 0x91,
|
||||
'"', '?', '?', '?', '?', '-', '?', '?',
|
||||
0xB9, 0xBA, 0x98, 0x99, 0x27, 0x88, '?', '.',
|
||||
',', '?', '?', '?', '?', 0x9B, '?', '?',
|
||||
/* #192 = 0xC0 */
|
||||
0xB2, 0xA2, 0xA4, 'A', 0xA0, 0xA1, 0xA5, 0xA3,
|
||||
0xA7, 0xA6, 0xA8, 0xB4, 0xAB, 0xAA, 0xAC, 0xA9,
|
||||
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xAD, 'x',
|
||||
0xAF, 0xB7, 0xB6, 0xB8, 0xA5, 'Y', 'p', 0xB3,
|
||||
/* #224 = 0xE0 */
|
||||
0xD2, 0xC2, 0xC4, 'a', 0xC0, 0xC1, 0xC5, 0xC3,
|
||||
0xC7, 0xC6, 0xC8, 0xD4, 0xCB, 0xCA, 0xCC, 0xC9,
|
||||
'o', 0xCE, 0xD1, 0xD0, 0xDF, 'o', 0xAD, 0xBB,
|
||||
0xCF, 0xD7, 0xD6, 0xD8, 0xD5, 'y', 'p', 'y' };
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
const int usr_chr_dot_assignment[57] = { 0, 0 }; // no usercharacters
|
||||
for (tmp = 0; tmp < 57; tmp++)
|
||||
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
||||
|
||||
// Where to place the usercharacters (0..30) in the asciicode.
|
||||
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
||||
// (useful for displays with less then 30 usercharacters and predefined bars)
|
||||
const unsigned int usr_chr_mapping[31]=
|
||||
{0,0,0,0,0,0, 0xF4, 0xF4, 0xF5, 0xF6, 0xF6, 0xF7, 0, 0xF0, 0xF1, 0xF2, 0xF3};
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
||||
|
||||
|
||||
}
|
||||
|
||||
void
|
||||
serialVFD_load_Samsung (Driver *drvthis)
|
||||
{ //Samsung 20S207DA4 & 20S207DA6
|
||||
PrivateData *p = (PrivateData*) drvthis->private_data;
|
||||
int tmp, w;
|
||||
|
||||
if (p->customchars == -83)
|
||||
p->customchars = 16; // number of custom characters the display provides
|
||||
p->vbar_cc_offset = 0; // character offset of the bars
|
||||
p->hbar_cc_offset = 0; // character offset of the bars
|
||||
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
||||
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
||||
|
||||
// hardwarespecific commands:
|
||||
// hw_cmd[Command][data] = {{commandlength , command 1},
|
||||
// .....
|
||||
// {commandlength , command N}}
|
||||
const char hw_cmd[10][4] = {{2 ,0x04, 0x20}, // dark
|
||||
{2 ,0x04, 0x40},
|
||||
{2 ,0x04, 0x60},
|
||||
{2 ,0x04, 0xFF}, // bright
|
||||
{2 ,0x10, 0x00}, // pos1
|
||||
{1 ,0x10,}, // move cursor
|
||||
{1 ,0x1F}, // reset
|
||||
{2 ,0x11,0x14}, // init
|
||||
{1 ,0x1B}, // set user char
|
||||
{1 ,0x09}}; // tab
|
||||
for (tmp = 0; tmp < 10; tmp++)
|
||||
for (w = 0; w < 4; w++)
|
||||
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
||||
|
||||
// Translates ISO 8859-1 to display charset.
|
||||
const unsigned char charmap[] = {
|
||||
127, // the "filled-block"-character usually 127
|
||||
/* #128 = 0x80 */
|
||||
128, 129, 130, 131, 132, 133, 134, 135,
|
||||
136, 137, 138, 139, 140, 141, 142, 143,
|
||||
144, 145, 146, 147, 148, 149, 150, 151,
|
||||
152, 153, 154, 155, 156, 157, 158, 159,
|
||||
/* #160 = 0xA0 */
|
||||
160, 0xAD, 0x9B, 0x9C, 0xC8, 0x9D, 0x7C, 0xC0,
|
||||
'"', '?', 0xA6, 0xAE, 0xAA, '-', '?', '?',
|
||||
0xEF, 0xCA, 0xC6, 0xC7, 0x27, 0xB8, '?', '.',
|
||||
',', '?', 0xA7, 0xAF, 0xAC, 0xAB, '?', 0xA8,
|
||||
/* #192 = 0xC0 */
|
||||
0xD0, 'A', 0xD5, 'A', 0x8E, 0x8F, 0x92, 0x80,
|
||||
0xD1, 0x90, 0xD6, 0xD3, 'I', 'I', 0xD7, 0xD4,
|
||||
'D', 0xA5, 'O', 'O', 0xD8, 'O', 0x99, 'x',
|
||||
'0', 0xD2, 'U', 0xD9, 0x9A, 'Y', 'p', 0xB1,
|
||||
/* #224 = 0xE0 */
|
||||
0x85, 0xA0, 0x83, 'a', 0x84, 0x86, 0x91, 0x87,
|
||||
0x8A, 0x82, 0x88, 0x89, 0x8D, 0xA1, 0x8C, 0x8B,
|
||||
'o', 0xA4, 0x95, 0xA9, 0x93, 'o', 0x94, '/',
|
||||
'0', 0x97, 0xA3, 0x96, 0x81, 'y', 'p', 0x89 };
|
||||
for (tmp = 0; tmp < 129; tmp++)
|
||||
p->charmap[tmp] = charmap[tmp];
|
||||
|
||||
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
||||
const int usr_chr_dot_assignment[57] = { 5,
|
||||
8, 7, 6, 5, 4, 3, 2, 1,
|
||||
16,15,14,13,12,11,10, 9,
|
||||
24,23,22,21,20,19,18,17,
|
||||
32,31,30,29,28,27,26,25,
|
||||
0, 0, 0, 0, 0,35,34,33 };
|
||||
for (tmp = 0; tmp < 57; tmp++)
|
||||
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
||||
|
||||
// Where to place the usercharacters (0..30) in the asciicode.
|
||||
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
||||
// (useful for displays with less then 30 usercharacters and predefined bars)
|
||||
const unsigned int usr_chr_mapping[31] = { 0xCD, 0xCE, 0xCF, 0xEE,
|
||||
0xFF, 0x05, 0x06, 0x07,
|
||||
0x0B, 0x0C, 0x0E, 0x0F,
|
||||
0x17, 0x1A, 0x1C, 0x1D };
|
||||
for (tmp = 0; tmp < 31; tmp++)
|
||||
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
||||
}
|
||||
|
||||
@@ -24,5 +24,5 @@
|
||||
#include "lcd.h"
|
||||
#include "serialVFD.h"
|
||||
|
||||
void serialVFD_load_display_data(Driver *drvthis);
|
||||
int serialVFD_load_display_data(Driver *drvthis);
|
||||
#endif
|
||||
|
||||
@@ -57,15 +57,28 @@ serialVFD_write_parallel (Driver *drvthis, unsigned char *dat, size_t length)
|
||||
|
||||
for (i_para = 0; i_para < length; i_para++) {
|
||||
port_out(p->port, dat[i_para]);
|
||||
// port_in(p->port+1);
|
||||
|
||||
if (p->para_wait > 2) // some displays need a little time to rest
|
||||
port_in(p->port+1);
|
||||
|
||||
port_out(p->port+2, WR_on);
|
||||
port_in(p->port+1);
|
||||
|
||||
if (p->para_wait > 1) // some displays need a little time to rest
|
||||
port_in(p->port+1);
|
||||
|
||||
port_out(p->port+2, WR_off);
|
||||
port_in(p->port+1);
|
||||
|
||||
if (p->para_wait > 0) // some displays need a little time to rest
|
||||
port_in(p->port+1);
|
||||
|
||||
for (j_para = 0; j_para < MAXBUSY; j_para++) {
|
||||
if ((port_in(p->port+1)) & Busy)
|
||||
break;
|
||||
}
|
||||
|
||||
for (j_para = 3; j_para < p->para_wait; j_para++) // some displays need a little longer time to rest
|
||||
port_in(p->port+1);
|
||||
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user