add id's to <sectX> to avoid warnings in xmlto

2006-09-13 11:49:43 +00:00
parent 487f0c5c09
commit 1e5a7def69
36 changed files with 56 additions and 53 deletions
@@ -10,7 +10,7 @@ CFontz chipset.
 <sect2 id="CFontz-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="CFontz-config-section">
 <title>[CFontz]</title>

 <variablelist>
@@ -10,7 +10,7 @@ CFontz633 chipset.
 <sect2 id="CFontz633-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="CFontz633-config-section">
 <title>[CFontz633]</title>

 <variablelist>
@@ -10,7 +10,7 @@ CFontzPacket chipset.
 <sect2 id="CFontzPacket-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="CFontzPacket-config-section">
 <title>[CFontzPacket]</title>

 <variablelist>
@@ -10,7 +10,7 @@ CwLnx chipset.
 <sect2 id="CwLnx-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="CwLnx-config-section">
 <title>[CwLnx]</title>

 <variablelist>
@@ -10,7 +10,7 @@ IOWarrior chipset.
 <sect2 id="IOWarrior-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="IOWarrior-config-section">
 <title>[IOWarrior]</title>

 <variablelist>
@@ -19,7 +19,7 @@ You may find more information about the LCD on Martin Moeller's homepage
 <sect2 id="MD8800-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="MD8800-config-section">
 <title>[MD8800]</title>

 <variablelist>
@@ -10,7 +10,7 @@ NoritakeVFD chipset.
 <sect2 id="NoritakeVFD-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="NoritakeVFD-config-section">
 <title>[NoritakeVFD]</title>

 <variablelist>
@@ -32,7 +32,7 @@ For more information see the
 <sect2 id="bayrad-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="bayrad-config-section">
 <title>[bayrad]</title>

 <variablelist>
@@ -10,7 +10,7 @@ curses chipset.
 <sect2 id="curses-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="curses-config-section">
 <title>[curses]</title>

 <variablelist>
@@ -5,7 +5,7 @@
      This section describes the Eyebox One.
    </para>

-<sect2>
+<sect2 id="eyeboxone-features">
        <title>Eyebox One LCD Module</title>
        <para>
          Eyebox One is a small rackmounted server marketed by Rightvision 
@@ -34,7 +34,7 @@
 	  more than meets LCDproc's needs.
        </para>
    </sect2>
-    <sect2>
+    <sect2 id="eyeboxone-special_features">
        <title>Eyebox One Driver and lcdproc client</title>
        <para>
 	You can use the two Eyebox One graphbars, one as a free CPU meter, and one as a free RAM meter
@@ -56,7 +56,7 @@ This section was originally part of the mtxorb.docbook file by Rene Wagner <emai
 </para>

 <para>
-This section has been modified by Cédric TESSIER (http://www.nezetic.info)
+This section has been modified by Cédric TESSIER (http://www.nezetic.info)
 </para>
 </sect2>

@@ -64,7 +64,7 @@ This section has been modified by C
 <sect2 id="eyeboxone-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="eyeboxone-config-section">
 <title>[EyeboxOne]</title>

 <variablelist>
@@ -32,7 +32,7 @@ Author
 <sect2 id="glcdlib-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="glcdlib-config-section">
 <title>[glcdlib]</title>

 ## mandatory:
@@ -10,7 +10,7 @@ Matrix Orbital GLK chipset.
 <sect2 id="glk-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="glk-config-section">
 <title>[glk]</title>

 <variablelist>
@@ -1602,7 +1602,7 @@ can be done by specifying "--enable-drivers=all" or by
 <sect2 id="hd44780-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="hd44780-config-section">
 <title>[hd44780]</title>

 <variablelist>
@@ -10,7 +10,7 @@ icp_a106 chipset.
 <sect2 id="icp_a106-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="icp_a106-config-section">
 <title>[icp_a106]</title>

 <variablelist>
@@ -36,7 +36,7 @@ For further details, please consult the page and the forum at
 <sect2 id="imon-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="imon-config-section">
 <title>[imon]</title>

 <variablelist>
@@ -61,7 +61,7 @@ lirc supports Irman as well.
 <sect2 id="IrMan-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="IrMan-config-section">
 <title>[IrMan]</title>

 <variablelist>
@@ -9,7 +9,7 @@ This section covers the joystick input driver for LCDd.
 <sect2 id="joy-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="joy-config-section">
 <title>[joy]</title>

 <variablelist>
@@ -32,7 +32,7 @@ made in australia :-)
 <sect2 id="lb216-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="lb216-config-section">
 <title>[lb216]</title>

 <variablelist>
@@ -10,7 +10,7 @@ lcdm001 chipset.
 <sect2 id="lcdm001-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="lcdm001-config-section">
 <title>[lcdm001]</title>

 <variablelist>
@@ -10,7 +10,7 @@ lcterm chipset.
 <sect2 id="lcterm-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="lcterm-config-section">
 <title>[lcterm]</title>

 <variablelist>
@@ -115,7 +115,7 @@ The prog=... line must be the same as in your <filename>~/.lircrc</filename>
 <sect2 id="lirc-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="lirc-config-section">
 <title>[lirc]</title>

 <variablelist>
@@ -10,7 +10,7 @@ ms6931 chipset.
 <sect2 id="ms6931-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="ms6931-config-section">
 <title>[ms6931]</title>

 <variablelist>
@@ -10,7 +10,7 @@ mtc_s16209x chipset.
 <sect2 id="mtc_s16209x-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="mtc_s16209x-config-section">
 <title>[mtc_s16209x]</title>

 <variablelist>
@@ -1,18 +1,18 @@
-<sect1 id="mtxorb">
+<sect1 id="MtxOrb">
 <title>The Matrix Orbital Driver (MtxOrb)</title>

 <para>
      This section covers the installation process for the Matrix Orbital LCD
      module intended for use with LCDproc.
-    </para>
-    <para>
+</para>
+<para>
      We will examine the installation process of the hardware in
      small steps, as it is vitally important to pay close attention to detail during
      hardware installation to avoid damaging equipment.
-    </para>
+</para>

-<sect2>
-        <title>Matrix Orbital LCD Modules</title>
+<sect2 id="MtxOrb-features">
+<title>Matrix Orbital LCD Modules</title>
        <para>
          LCDproc was born out of original tinkering by William Ferrell with
          one of these LCD modules. Their ease of installation and use (as well
@@ -53,9 +53,10 @@
          than the whole screen, the LCD can update faster than can be seen by
          the human eye. This, of course, more than meets LCDproc's needs.
        </para>
-      </sect2>
-  <sect2>
-    <title>Matrix Orbital Hardware Installation</title>
+</sect2>
+
+<sect2 id="MtxOrb-hardware">
+<title>Matrix Orbital Hardware Installation</title>
      <para>
        Regardless of what specific type of hardware you intend to use with LCDproc,
        installation is usually straightforward, and requires only a few steps. Regardless,
@@ -75,7 +76,8 @@
          power cables (as some LCD modules require).
        </para>
      </warning>
-      <sect3>
+
+      <sect3 id="MtxOrb-lcd_vfd-installation">
        <title>Matrix Orbital LCD/VFD Module Installation</title>
        <para>
          The LCD and VFD modules from Matrix Orbital are relatively straightforward
@@ -96,7 +98,7 @@
 	    or 12 volt unit. You should have this information available before proceeding.
 	  </para>
 	</tip>
-	<sect4>
+	<sect4 id="MtxOrb-powercable-modification">
 	  <title>Power Cable Modification</title>
 	  <para>
 	    The first step in installing the module is making the necessary modifications
@@ -188,7 +190,7 @@
 	    </para>
 	  </note>
        </sect4>
-	<sect4>
+	<sect4 id="MtxOrb-serial-connection">
 	  <title>Serial Connection</title>
 	  <para>
 	    The LCD module uses a standard DB9 serial connector. You can attach the module
@@ -200,13 +202,14 @@
 	    While connecting the serial cable to the module, be sure to configure the
 	    module's serial interface settings. Typically, setting the module to its fastest
 	    setting (19,200 baud, 8-N-1) is recommended. The speed settings can
-	    be configured from the config file <filename>/etc/LCDd.conf</filename>. If not specified in the config file,
+	    be configured from the config file <filename>/etc/LCDd.conf</filename>.
+	    If not specified in the config file,
 	    the Matrix Orbital module driver in LCDproc default to use these settings.
 	  </para>
 	</sect4>
      </sect3>
 </sect2>
-<sect2 id="mtxorb-copy">
+<sect2 id="MtxOrb-copy">
 <title>Copyright</title>

 <para>
@@ -222,7 +225,7 @@ Slightly modified in order to include it in this document March 2002, Rene Wagne
 <sect2 id="MtxOrb-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="MtxOrb-config-section">
 <title>[MtxOrb]</title>

 <variablelist>
@@ -116,7 +116,7 @@ Email: info@coresystems.de  · http://www.coresystems.de/
 <sect2 id="pyramid-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="pyramid-config-section">
 <title>[pyramid]</title>

 <variablelist>
@@ -10,7 +10,7 @@ sed1330 chipset.
 <sect2 id="sed1330-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="sed1330-config-section">
 <title>[sed1330]</title>

 <variablelist>
@@ -10,7 +10,7 @@ sed1520 chipset.
 <sect2 id="sed1520-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="sed1520-config-section">
 <title>[sed1520]</title>

 <variablelist>
@@ -347,7 +347,7 @@ optional
 <title>Configuration in LCDd.conf</title>


-<sect3>
+<sect3 id="serialVFD-config-section">
 <title>[serialVFD]</title>

 <variablelist>
@@ -10,7 +10,7 @@ sli chipset.
 <sect2 id="Wirz-sli-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="Wirz-sli-config-section">
 <title>[sli]</title>

 <variablelist>
@@ -10,7 +10,7 @@ stv5730 chipset.
 <sect2 id="stv5730-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="stv5730-config-section">
 <title>[stv5730]</title>

 <variablelist>
@@ -10,7 +10,7 @@ svga chipset.
 <sect2 id="svga-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="svga-config-section">
 <title>[svga]</title>

 <variablelist>
@@ -69,7 +69,7 @@ can be done by specifying "--enable-drivers=all" or by
 <sect2 id="t6963-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="t6963-config-section">
 <title>[t6963]</title>

 <variablelist>
@@ -10,7 +10,7 @@ text chipset.
 <sect2 id="text-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="text-config-section">
 <title>[text]</title>

 <variablelist>
@@ -33,7 +33,7 @@ of the LCD display by its manufacturer.
 <sect2 id="tyan-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="tyan-config-section">
 <title>[tyan]</title>

 <variablelist>
@@ -10,7 +10,7 @@ ula200 chipset.
 <sect2 id="ula200-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="ula200-config-section">
 <title>[ula200]</title>

 <variablelist>
@@ -10,7 +10,7 @@ xosd chipset.
 <sect2 id="xosd-config">
 <title>Configuration in LCDd.conf</title>

-<sect3>
+<sect3 id="xosd-config-section">
 <title>[xosd]</title>

 <variablelist>