Commit Graph
5 Commits
Author SHA1 Message Date
mangavalkandClaude Opus 5.5 bcb1a53b2a MCU firmware: aldis as a submodule, old Klipper update script archived
aldis (https://github.com/mjonuschat/aldis, GPL-3.0) replaces
scripts/update_all_mcus.sh: it discovers the MCUs from Moonraker and builds
and flashes only outdated ones with the Kconfig each MCU reports. Its source
is a submodule in external/aldis pinned to v0.4.0, the release installed on
the Pi in ~/aldis (Moonraker does not fetch submodules, so it stays empty
there). The old script moves to scripts/archive/; the Katapult script stays,
aldis does not update bootloaders. scripts/README.md: install, setup, use
and the checks for this printer (all MCUs report mcu_kconfig, all use
Katapult). README and CLAUDE.md point to it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 22:37:45 +01:00
mangavalkandClaude Opus 5.5 7bee9a1ecd Add a user guide for the axis twist calibration
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 22:55:55 +01:00
mangavalkandClaude Opus 5.5 92d86d6bfd TWIST_CALIBRATE: axis twist calibration from Mainsail
scripts/twist_check.py runs on the Pi and measures or verifies the nozzle vs
Beacon offset; windows explain each step, show progress and give a verdict,
with an HTML report in config/twist_data/. It refuses to start during a print,
stops on unexpected readings and never changes printer.cfg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 22:53:48 +01:00
mangavalkandClaude Opus 5.5 179bd0991b Include after AFC, link scripts/ into the config folder
- bd_pa_spoolman.cfg renames AFC's SET_SPOOL_ID, so klipper-macros.cfg
  must be included after [include AFC/*.cfg]; the README said otherwise.
- install.sh links scripts/ as ~/printer_data/config/klipper-macros-scripts
  so the scripts can be edited in Mainsail/Fluidd.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 15:28:52 +02:00
mangavalkandClaude Opus 5.5 6dbb4ca3fb Initial import of my Klipper macros, modules and scripts
Macros as they run on the printer (Voron 2.4 + AFC Box Turtle +
Blobifier + Beacon + bd_pressure + bdwidth + iHeater), the Klipper
modules they need (xy_drift, bdwidth_status, bdpressure_check), MCU
firmware update scripts, install.sh with Moonraker update manager
support, and READMEs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 13:45:11 +02:00