Commit Graph

Select branches

Hide Pull Requests

main

Mono Color

• 87a06f9c30 First layer: AFC fault detection less sensitive main mangavalkandClaude Opus 5.5 2026-10-22 16:47:11 +02:00
• a63b66a7d8 bdp_guard: new zero at every ARM mangavalkandClaude Opus 5.5 2026-10-19 16:34:26 +02:00
• 29604b2f1e PA calibration: wider PA range for TPU/TPE mangavalkandClaude Opus 5.5 2026-10-19 16:29:02 +02:00
• 8a5f6b6dd9 PA calibration: lower test flow for TPU/TPE mangavalkandClaude Opus 5.5 2026-10-19 16:15:03 +02:00
• 93ae8795b8 PA calibration reads Spoolman first; guard resets a sensor left in PA mode mangavalkandClaude Opus 5.5 2026-10-19 16:04:40 +02:00
• d49e65c0bb Flexible lanes load slower; purge at the previous filament's temperature mangavalkandClaude Opus 5.5 2026-10-19 15:59:27 +02:00
• 464a7c1046 CLAUDE.md: purge check peaks up to 246 with ASA at 250-260C mangavalkandClaude Opus 5.5 2026-10-19 15:20:02 +02:00
• 0b1b2a6947 Purge check: accept load-check firmware v2; chamber load levels first mangavalkandClaude Opus 5.5 2026-10-19 12:12:25 +02:00
• b9d2f3a062 Nozzle guard in stop mode (brush log-only), wait for the nozzle before HOME mangavalkandClaude Opus 5.5 2026-10-18 23:25:28 +02:00
• a16b57a0a9 Move bd_pressure.cfg and TEST_SPEED into the repo mangavalkandClaude Opus 5.5 2026-10-18 23:11:02 +02:00
• 8eef0ee298 bdp_guard: one lock for all I2C transfers of the bd_pressure mangavalkandClaude Opus 5.5 2026-10-18 23:06:49 +02:00
• 61fa8acb05 Print start: contact homing, nozzle guard, Z check, purge before chamber heat mangavalkandClaude Opus 5.5 2026-10-18 22:39:26 +02:00
• 2100857846 Chamber prints: unload a lane that is not the first tool before the soak mangavalkandClaude Opus 5.5 2026-10-17 19:56:30 +02:00
• 6cc43f951d Print start: soak before QGL and Z, load after Z, PA per lane temperature mangavalkandClaude Opus 5.5 2026-10-17 19:46:05 +02:00
• e5be65834e LEDs: nozzle light follows the motion sensor, new logo status macro mangavalkandClaude Opus 5.5 2026-10-17 19:32:42 +02:00
• fbdb2d5e1d Show errors and warnings on the display (_ERROR, _WARN) mangavalkandClaude Opus 5.5 2026-10-16 17:41:41 +02:00
• a67e99015f RESUME: check the AFC lane, add AFC_CLEAR_ALL_MESSAGES mangavalkandClaude Opus 5.5 2026-10-15 22:12:53 +02:00
• ec1f67e455 PA_CALIBRATE_ALL_LANES: skip lanes without filament mangavalkandClaude Opus 5.5 2026-10-14 15:17:20 +02:00
• 536db5836d Purge check: fail when bd_pressure does not answer, add override mangavalkandClaude Opus 5.5 2026-10-12 21:18:21 +02:00
• 25891640b8 Reject PA calibrations with no result or bad sensor data mangavalkandClaude Opus 5.5 2026-10-12 21:10:06 +02:00
• 82f9486160 README: remove the section on switching from config folder copies mangavalkandClaude Opus 5.5 2026-10-12 19:46:36 +02:00
• 93f00c87a7 Stop using bdwidth while printing, work without it mangavalkandClaude Opus 5.5 2026-10-12 18:18:40 +02:00
• 76172fbc4f Remove committed __pycache__, ignore Python bytecode mangavalkandClaude Opus 5.5 2026-10-12 18:03:25 +02:00
• e4d2230a57 bdwidth_status: keep a bdwidth USB dropout from shutting down Klipper mangavalkandClaude Opus 5.5 2026-10-12 18:03:18 +02:00
• eb7e0d4482 Purge and check before resuming after a PAUSE mangavalkandClaude Opus 5.5 2026-10-12 14:08:53 +02:00
• b6379621f6 bdwidth: width only in PRINT_START mangavalkandClaude Opus 5.5 2026-10-11 20:31:43 +02:00
• e152246e9f Retract at print end, undo it at print start mangavalkandClaude Opus 5.5 2026-10-11 15:01:55 +02:00
• 179bd0991b Include after AFC, link scripts/ into the config folder mangavalkandClaude Opus 5.5 2026-10-10 15:28:52 +02:00
• 9dc733b5bb Fix pause/resume chain, shared print cleanup, add CLAUDE.md mangavalkandClaude Opus 5.5 2026-10-10 15:20:28 +02:00
• eaf9c82617 Group macros by topic, add Blobifier, fix first tool change mangavalkandClaude Opus 5.5 2026-10-10 14:24:37 +02:00
• 6dbb4ca3fb Initial import of my Klipper macros, modules and scripts mangavalkandClaude Opus 5.5 2026-10-10 13:45:11 +02:00