PA test: cap PETG test flow at 12 mm3/s

PETG and PETG-CF are too viscous for the 25 mm3/s test flow of the 0.4
nozzle; 12 matches their slicer flow limit. First run at 12 (spool 35,
PETG-CF, 250C) gave PA 0.058.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-09 14:55:17 +01:00
1 parent 5e8743c33a
commit 5785df99b3
1 file changed
+6 -4
+6 -4
View File
@@ -201,10 +201,12 @@ variable_fallback_nozzle_temp: 260
# The 0.2 values are starting estimates, not measured yet.
variable_nozzle_test: {"0.4": {"max_volumetric": 25, "pa_step": 0.002}, "0.2": {"max_volumetric": 5, "pa_step": 0.004}}
# Lower test flow (mm3/s) for materials that cannot extrude max_volumetric:
# soft TPU buckles or slips in the extruder at 25. A key contained in the
# lane's material (any case) applies; the lowest of these and the nozzle's
# flow wins.
variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8}
# soft TPU buckles or slips in the extruder at 25; PETG (also PETG-CF) is
# more viscous at its temperature, 12 matches its slicer flow limit
# (spool 35, PETG-CF at 250C: PA 0.058 at 12, 2026-11-09). A key contained
# in the lane's material (any case) applies; the lowest of these and the
# nozzle's flow wins.
variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8, "petg": 12}
# Nozzle height (mm) for the test lines (PA_CALIBRATE keeps the current Z).
# At 5 they are extruded in the air, clear of the bed and plate.
variable_test_z: 5