From 5785df99b30e012e7a4544d11e99daefbb957a7d Mon Sep 17 00:00:00 2001 From: MangaValk Date: Mon, 9 Nov 2026 14:55:17 +0100 Subject: [PATCH] PA test: cap PETG test flow at 12 mm3/s PETG and PETG-CF are too viscous for the 25 mm3/s test flow of the 0.4 nozzle; 12 matches their slicer flow limit. First run at 12 (spool 35, PETG-CF, 250C) gave PA 0.058. Co-Authored-By: Claude Opus 5.5 --- macros/pressure_advance/bd_pa_spoolman.cfg | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/macros/pressure_advance/bd_pa_spoolman.cfg b/macros/pressure_advance/bd_pa_spoolman.cfg index 8272397..0582508 100644 --- a/macros/pressure_advance/bd_pa_spoolman.cfg +++ b/macros/pressure_advance/bd_pa_spoolman.cfg @@ -201,10 +201,12 @@ variable_fallback_nozzle_temp: 260 # The 0.2 values are starting estimates, not measured yet. variable_nozzle_test: {"0.4": {"max_volumetric": 25, "pa_step": 0.002}, "0.2": {"max_volumetric": 5, "pa_step": 0.004}} # Lower test flow (mm3/s) for materials that cannot extrude max_volumetric: -# soft TPU buckles or slips in the extruder at 25. A key contained in the -# lane's material (any case) applies; the lowest of these and the nozzle's -# flow wins. -variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8} +# soft TPU buckles or slips in the extruder at 25; PETG (also PETG-CF) is +# more viscous at its temperature, 12 matches its slicer flow limit +# (spool 35, PETG-CF at 250C: PA 0.058 at 12, 2026-11-09). A key contained +# in the lane's material (any case) applies; the lowest of these and the +# nozzle's flow wins. +variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8, "petg": 12} # Nozzle height (mm) for the test lines (PA_CALIBRATE keeps the current Z). # At 5 they are extruded in the air, clear of the bed and plate. variable_test_z: 5