PA test: cap PETG test flow at 12 mm3/s
PETG and PETG-CF are too viscous for the 25 mm3/s test flow of the 0.4 nozzle; 12 matches their slicer flow limit. First run at 12 (spool 35, PETG-CF, 250C) gave PA 0.058. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
5e8743c33a
commit
5785df99b3
1 file changed
+6
-4
@@ -201,10 +201,12 @@ variable_fallback_nozzle_temp: 260
|
|||||||
# The 0.2 values are starting estimates, not measured yet.
|
# The 0.2 values are starting estimates, not measured yet.
|
||||||
variable_nozzle_test: {"0.4": {"max_volumetric": 25, "pa_step": 0.002}, "0.2": {"max_volumetric": 5, "pa_step": 0.004}}
|
variable_nozzle_test: {"0.4": {"max_volumetric": 25, "pa_step": 0.002}, "0.2": {"max_volumetric": 5, "pa_step": 0.004}}
|
||||||
# Lower test flow (mm3/s) for materials that cannot extrude max_volumetric:
|
# Lower test flow (mm3/s) for materials that cannot extrude max_volumetric:
|
||||||
# soft TPU buckles or slips in the extruder at 25. A key contained in the
|
# soft TPU buckles or slips in the extruder at 25; PETG (also PETG-CF) is
|
||||||
# lane's material (any case) applies; the lowest of these and the nozzle's
|
# more viscous at its temperature, 12 matches its slicer flow limit
|
||||||
# flow wins.
|
# (spool 35, PETG-CF at 250C: PA 0.058 at 12, 2026-11-09). A key contained
|
||||||
variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8}
|
# in the lane's material (any case) applies; the lowest of these and the
|
||||||
|
# nozzle's flow wins.
|
||||||
|
variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8, "petg": 12}
|
||||||
# Nozzle height (mm) for the test lines (PA_CALIBRATE keeps the current Z).
|
# Nozzle height (mm) for the test lines (PA_CALIBRATE keeps the current Z).
|
||||||
# At 5 they are extruded in the air, clear of the bed and plate.
|
# At 5 they are extruded in the air, clear of the bed and plate.
|
||||||
variable_test_z: 5
|
variable_test_z: 5
|
||||||
|
|||||||
Reference in new issue
Block a user