Files
esphome-wake-up-light-ii/components/uart/software_serial_tx_frame.h
T
mangavalkandClaude Opus 5.5 1457e25d98 Update the patched UART component to ESPHome 2026.11.0
ESPHome 2026.11's tuya component calls uart.new_uart_component(), which the
2026.10.2 copy didn't have, so the build failed. Copy the UART component from
2026.11.0, reapply the PA13/PA14 patch, regenerate the patch file and point
the refs at v1.0.6.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-19 00:31:45 +01:00

40 lines
1.6 KiB
C++

#pragma once
#include <cstdint>
#include "esphome/core/helpers.h"
namespace esphome::uart {
/// One software serial TX byte as line levels, one bit per slot.
struct SoftwareSerialTxFrame {
/// The start bit at slot 0, then the frame, then a stop bit that ends the last run
uint32_t line;
/// Slot of the last 0; from the edge after it the line stays high through the stop bits
uint32_t high_from;
/// Slots right after an edge into a run of equal bits lasting at least `min_run_cycles`, where a pending
/// interrupt only delays bits that repeat the level
uint32_t unlock_at;
};
/// `frame` holds `num_bits` data and parity bits, LSB first. `unlock_at` stays 0 unless `find_unlocks`.
ESPHOME_ALWAYS_INLINE inline SoftwareSerialTxFrame software_serial_tx_frame(uint32_t frame, uint32_t num_bits,
uint32_t bit_time, uint32_t min_run_cycles,
bool find_unlocks) {
SoftwareSerialTxFrame tx;
tx.line = frame << 1 | (1u << (num_bits + 1));
// Slot 0 is the start bit, always 0, so the argument is never 0
tx.high_from = 31 - __builtin_clz(~tx.line & ((2u << num_bits) - 1));
tx.unlock_at = 0;
if (find_unlocks) {
const uint32_t edges = tx.line ^ (tx.line << 1 | 1); // the idle line before the start bit is high
for (uint32_t pos = 0; pos <= tx.high_from; pos++) {
if (((edges >> pos) & 1) && (__builtin_ctz(edges >> (pos + 1)) + 1) * bit_time >= min_run_cycles)
tx.unlock_at |= 1u << pos;
}
}
return tx;
}
} // namespace esphome::uart