Compare commits
12
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
|
|
c8fc973320 | ||
|
|
a41dccfa5b | ||
|
|
ba83275d88 | ||
|
|
592837c6de | ||
|
|
18cf03f388 | ||
|
|
09523be12d | ||
|
|
9853841a21 | ||
|
|
494b106f0c | ||
|
|
4a533af37a | ||
|
|
0cf5df9b6e | ||
|
|
95686a3608 | ||
|
|
3fcd15ad86 |
No files matched your search
@@ -82,10 +82,26 @@ through a MAX3232. The [desk case](case/README.md) is made for that board.
|
|||||||
|
|
||||||
### Power
|
### Power
|
||||||
|
|
||||||
The display takes 5–24 V. At 5 V it draws about 0.8 A typical and 1.2 A
|
The display takes 4.5–26 V. Its supply current with all dots lit (datasheet
|
||||||
maximum, and the inrush current at power-on can be up to five times that. A
|
section 4.6):
|
||||||
dev-board regulator can't supply this, so give the display its own supply,
|
|
||||||
for example 12 V at 1 A, and connect the grounds together.
|
| Supply | Typical | Maximum | Inrush at power-on (5 × max) |
|
||||||
|
|--------|---------|---------|------------------------------|
|
||||||
|
| 5 V | 0.8 A | 1.2 A | up to 6 A |
|
||||||
|
| 12 V | 0.35 A | 0.55 A | up to 2.75 A |
|
||||||
|
| 24 V | 0.2 A | 0.3 A | up to 1.5 A |
|
||||||
|
|
||||||
|
The inrush current sets the size of the supply, not the running current. A
|
||||||
|
12 V 1 A adapter is **not enough**: it current-limits at power-on and the
|
||||||
|
display browns out during start-up. A dev-board regulator can't supply this
|
||||||
|
either, so give the display its own supply and connect the grounds together:
|
||||||
|
|
||||||
|
- **12 V, 3 A or more** (recommended). The D1 R1 can share it through its
|
||||||
|
barrel jack, which accepts up to 12 V.
|
||||||
|
- **12 V, 2 A plus a bulk capacitor** of 2200 µF / 25 V or more across VCC and
|
||||||
|
GND at the display connector, so the capacitor supplies the inrush peak.
|
||||||
|
- **24 V, 2 A.** This has the lowest current, but don't feed it to the D1 R1's
|
||||||
|
barrel jack: power the board separately, e.g. over USB.
|
||||||
|
|
||||||
### Signal levels
|
### Signal levels
|
||||||
|
|
||||||
|
|||||||
@@ -10,6 +10,14 @@ back wall.
|
|||||||
<img src="section.png" alt="Cross-section: display on the bezel, board on the base" width="49%">
|
<img src="section.png" alt="Cross-section: display on the bezel, board on the base" width="49%">
|
||||||
</p>
|
</p>
|
||||||
|
|
||||||
|
The printed build, assembled and with the body removed (D1 R1 with a
|
||||||
|
proto shield carrying the MAX3232):
|
||||||
|
|
||||||
|
<p>
|
||||||
|
<img src="build-front.jpg" alt="Printed case, assembled" width="49%">
|
||||||
|
<img src="build-inside.jpg" alt="Inside the case: display on the bezel, D1 R1 on the base" width="49%">
|
||||||
|
</p>
|
||||||
|
|
||||||
Outer size: about 208 × 112 × 86 mm (W × D × H). The parts need a print bed of
|
Outer size: about 208 × 112 × 86 mm (W × D × H). The parts need a print bed of
|
||||||
at least 210 × 115 mm.
|
at least 210 × 115 mm.
|
||||||
|
|
||||||
|
|||||||
Binary file not shown.
|
After Width: | Height: | Size: 3.3 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 2.5 MiB |
Binary file not shown.
|
Before Width: | Height: | Size: 1.4 MiB After Width: | Height: | Size: 1.4 MiB |
Binary file not shown.
|
Before Width: | Height: | Size: 3.1 MiB After Width: | Height: | Size: 3.1 MiB |
Reference in new issue
Block a user