mangavalk/esphome-samsung-vfd
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Case: 12 inserts, M3x6 for the display

Browse Source 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-01 16:35:55 +01:00
1 parent 9853841a21
commit 09523be12d
2 files changed
+3 -3
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

case/README.md
+2 -2
View File
@@ -27,13 +27,13 @@ works if the case stays out of the sun.
## Hardware ## Hardware
- 10 × M3 heat-set inserts (about 4.6 mm OD, 5.7 mm long; the holes are 4.0 mm - 12 × M3 heat-set inserts (about 4.6 mm OD, 5.7 mm long; the holes are 4.0 mm
and 6 mm deep): and 6 mm deep):
- 4 in the bezel's display bosses - 4 in the bezel's display bosses
- 2 in the bezel's feet - 2 in the bezel's feet
- 2 in the body's rear corners - 2 in the body's rear corners
- 4 on the base's board standoffs - 4 on the base's board standoffs
- 4 × M3×8 to bolt the display to the bezel - 4 × M3×6 to bolt the display to the bezel
- 4 × M3×6 to hold the D1 board on its standoffs - 4 × M3×6 to hold the D1 board on its standoffs
- 4 × M3×8 to hold the base on, from below; **M3×10** with the TPU feet - 4 × M3×8 to hold the base on, from below; **M3×10** with the TPU feet
case/vfd-case.scad
+1 -1
View File
@@ -8,7 +8,7 @@
// Assembly: // Assembly:
// 1. Melt M3 heat-set inserts into: 4 display bosses + 2 feet on the bezel, // 1. Melt M3 heat-set inserts into: 4 display bosses + 2 feet on the bezel,
// 2 rear corner bosses in the body, 4 board standoffs on the base. // 2 rear corner bosses in the body, 4 board standoffs on the base.
// 2. Bolt the display to the bezel from behind (4x M3x8). // 2. Bolt the display to the bezel from behind (4x M3x6).
// 3. Screw the D1 board onto the base (4x M3x6). // 3. Screw the D1 board onto the base (4x M3x6).
// 4. Slide the bezel (with display) up into the body's side grooves from below. // 4. Slide the bezel (with display) up into the body's side grooves from below.
// 5. Wire up, put the body on the base and screw it together from below (4x M3x8). // 5. Wire up, put the body on the base and screw it together from below (4x M3x8).