- PCB rev 0.1: Power3A class (1.5 mm) for the 12 V input path, Aavid
clip-on heatsinks on Q3/Q5/Q6 (project footprint library), T-junction
healing and via shrink in the router; DRC 0 errors
- Current-capacity and heatsink documentation
- CLAUDE.md with project decisions, workflow and gotchas
- docs/design-review.md: review of a module-only PSU (rev 0.2) and cost
estimate
- Project paused for budget and safety reasons
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Design docs: 12 V DC power supply, safety and bring-up, ESP32 interface, BOM
- PSU schematic (schemdraw) and KiCad 10 carrier-board project with HV net classes
- ESP32 PlatformIO firmware skeleton with HV watchdog toggle
- Reference schematic of the Stern 520-5138-00 display PSU
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5