- Log page now runs a diagnostic scan instead of CAN listening (the Fiesta's OBD
port carries no broadcast traffic): unfiltered check, module discovery
0x700-0x7EF (22F188, then 3E00 with 1 s timeout), all 65536 DIDs per module,
progress in NVS, speed/voltage polled every 2 s in between
- Result (drives 2026-11-12..18): only the PCM 0x7E0 answers; 389 DIDs supported
(logs in docs/canlog/scan, scan2)
- Reset scan button, BLE connection interval request, progress lines
- CLAUDE.md: screen-has-priority rule, web UI future idea, findings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CAN log page: ELM327 monitor-mode survey/capture of broadcast frames with marks,
written to /canlog on the SD card; serial "ls"/"get" commands to download logs
- sd_card: reference-counted SD_MMC mount shared by bg_store and the logger
- heap_caps_malloc_extmem_enable(64): internal RAM was down to ~10 KB, SD mounts
failed with ESP_ERR_NO_MEM (DMA); now ~23 KB free, 13.8 KB DMA block
- docs/canlog: first test drive (Fiesta Mk8 2018) - no broadcast frames on the
OBD port, only diagnostic replies (gateway)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>