12-OBD-Speed: CAN logger page, shared SD mount, more PSRAM
- CAN log page: ELM327 monitor-mode survey/capture of broadcast frames with marks, written to /canlog on the SD card; serial "ls"/"get" commands to download logs - sd_card: reference-counted SD_MMC mount shared by bg_store and the logger - heap_caps_malloc_extmem_enable(64): internal RAM was down to ~10 KB, SD mounts failed with ESP_ERR_NO_MEM (DMA); now ~23 KB free, 13.8 KB DMA block - docs/canlog: first test drive (Fiesta Mk8 2018) - no broadcast frames on the OBD port, only diagnostic replies (gateway) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
21012adbec
commit
60cd7cf262
16 files changed
+1975
-47
No files matched your search
+26
-2
@@ -16,6 +16,10 @@ Uses the shared board library and LVGL 9.6 (`../shared`), NimBLE-Arduino 2.5.1.
|
||||
dimensions shown; not 360×360 in orange). Tap one: it is copied into the device's flash (progress shown) and
|
||||
played from there, so the SD card is not needed afterwards. At boot the device checks (in the background)
|
||||
whether the chosen file on the SD card changed (size/date) and re-copies it. **Rescan** re-reads the card.
|
||||
- **Swipe left once more → CAN log** (temporary, to find the cruise/ACC set speed and speed-sign messages, see below).
|
||||
**Start/Stop** (remembered: logging resumes by itself after power-up), **Mark**, the last frame of the three Ford
|
||||
candidate IDs, and the file on the SD card. While logging, the speed page shows a red `REC <marks>` pill and
|
||||
**a tap on the speed page adds a mark** (pill flashes `MARK n`).
|
||||
- **Idle** — after that time without speed data (ignition off, adapter gone) the screen goes dark, the GIF pauses and
|
||||
OBD polling stops; only `ATRV` every 30 s (answered by the adapter itself, doesn't wake the car's bus).
|
||||
Wakes on a touch (the touch is swallowed) or by itself when the voltage rises above 13.2 V (engine started).
|
||||
@@ -29,12 +33,32 @@ Service `FFF0`, notifications + commands on `FFF1` (verified with the user's "OB
|
||||
Init: `ATZ`, `ATE0`, `ATL0`, `ATS0`, `ATH0`, `ATSP0`, `0100`; then `010D` (speed) is polled continuously.
|
||||
Serial (115200) prints status changes as `[obd] ...`.
|
||||
|
||||
## CAN logger (finding ACC set speed / speed sign)
|
||||
Neither value is a standard OBD PID; on Fords they are broadcast CAN messages. Candidates from opendbc
|
||||
(`ford_lincoln_base_pt.dbc`, made for newer Fords; **not yet confirmed on the Fiesta Mk8**):
|
||||
`0x165` EngBrakeData `Veh_V_DsplyCcSet` (set speed as shown) + `CcStat_D_Actl`, `0x202` `Veh_V_RqCcSet` (0.5 km/h),
|
||||
`0x3D9` IPMA_Data2 `IsaVLim_D_Rq` (speed limit, 254 = no data) + `IsaVLimUnit_D_Rq` (1 km/h, 2 mph).
|
||||
|
||||
While logging, the OBD task (after `ATCSM1` silent monitoring, `ATH1`, `ATCAF0`):
|
||||
1. **Survey**: listens to the ID ranges `0XX`..`7XX` (`ATCRA` with wildcards + `ATMA`, 1.3 s each); a range that
|
||||
overflows the adapter (`BUFFER FULL` / 300 lines) is split into 16 smaller ones. Repeated every 10 min.
|
||||
2. **Capture**: one frame of every ID found, in turn; the three candidates after every 8 others.
|
||||
3. Every 2 s `ATAR` + `ATCAF1` + `010D` (speed, so the display keeps working, a bit laggy) and `ATRV`.
|
||||
If the adapter can't filter by wildcard it falls back to unfiltered 2 s windows.
|
||||
|
||||
Log: `/canlog/log_NNN.txt` (new file per session, appended every 2 s; kept in RAM while the card is missing).
|
||||
Lines `<ms> <type> <data>`: `C` adapter, `P` protocol, `V` speed, `B` voltage, `M` mark, `F id data` frame,
|
||||
`N id` no frame, `I` survey IDs, `E` adapter message/note. Test drive: change the set speed and pass signs, tap
|
||||
for a mark each time (passenger, or only when safe).
|
||||
|
||||
## Files
|
||||
| File | What |
|
||||
|---|---|
|
||||
| `src/main.cpp` | LVGL UI (tileview: speed page + menu page) |
|
||||
| `src/obd_link.cpp/.h` | BLE scan, connect/reconnect, ELM327 init and speed polling (background task on core 0) |
|
||||
| `src/main.cpp` | LVGL UI (tileview: speed, adapter menu, settings, background, CAN log) |
|
||||
| `src/obd_link.cpp/.h` | BLE scan, connect/reconnect, ELM327 init and speed polling, CAN logging steps (background task on core 0) |
|
||||
| `src/font_speed_120.c` | Montserrat Medium 120 px, digits and `-`, 4 bpp (generated with `lv_font_conv`, see header) |
|
||||
| `src/can_log.cpp/.h` | CAN log buffer + SD writer (background task), marks, values shown on the log page |
|
||||
| `src/sd_card.cpp/.h` | Shared, reference-counted SD_MMC mount (background store + logger) |
|
||||
| `src/bg_store.cpp/.h` | Background GIF from the SD card: list `/gifs`, copy into the `bggif` flash partition (header written last), mmap for playback, change check at boot (background task) |
|
||||
| `partitions.csv` | 4 MB app (no OTA) + 11.9 MB `bggif` raw area + NVS |
|
||||
| `data/bg.gif` | Built-in background (`ezgif-5-cb56986bc7.gif`, 360×360), linked into the firmware via `board_build.embed_files` |
|
||||
|
||||
@@ -0,0 +1,2 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
@@ -0,0 +1,3 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
71136 M 1
|
||||
@@ -0,0 +1,353 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
7304 C OBDII ELM327 v2.1
|
||||
7404 P A6
|
||||
7504 E ATCSM1 OK
|
||||
8305 V 0
|
||||
8455 B 13.0
|
||||
8905 E NO DATA
|
||||
10505 E NO DATA
|
||||
11105 V 0
|
||||
11205 B 12.9
|
||||
11655 E NO DATA
|
||||
13206 E NO DATA
|
||||
13856 V 0
|
||||
13956 B 13.0
|
||||
14406 E NO DATA
|
||||
14869 M 1
|
||||
15956 E NO DATA
|
||||
16556 V 0
|
||||
16656 B 13.0
|
||||
17106 E NO DATA
|
||||
18657 E NO DATA
|
||||
19257 V 0
|
||||
19357 B 13.0
|
||||
19457 I
|
||||
19803 E NO DATA
|
||||
21404 E NO DATA
|
||||
22954 E NO DATA
|
||||
23555 V 0
|
||||
23655 B 12.9
|
||||
24106 E NO DATA
|
||||
25656 E NO DATA
|
||||
27256 E NO DATA
|
||||
27956 V 0
|
||||
28056 B 13.1
|
||||
28506 E NO DATA
|
||||
30057 E NO DATA
|
||||
31607 E NO DATA
|
||||
32207 V 0
|
||||
32307 B 12.9
|
||||
32757 E NO DATA
|
||||
34357 E NO DATA
|
||||
35957 E NO DATA
|
||||
36553 V 1
|
||||
36653 B 12.9
|
||||
37153 E NO DATA
|
||||
38753 E NO DATA
|
||||
40354 E NO DATA
|
||||
40954 V 3
|
||||
41054 B 12.9
|
||||
41506 E NO DATA
|
||||
43057 E NO DATA
|
||||
44657 E NO DATA
|
||||
45357 V 5
|
||||
45507 B 12.9
|
||||
45957 E NO DATA
|
||||
47507 E NO DATA
|
||||
49057 E NO DATA
|
||||
49707 V 9
|
||||
49857 B 12.9
|
||||
50307 E NO DATA
|
||||
51903 E NO DATA
|
||||
53503 E NO DATA
|
||||
54155 V 8
|
||||
54206 B 12.9
|
||||
54357 E OK
|
||||
54707 E NO DATA
|
||||
56307 E NO DATA
|
||||
57153 V 6
|
||||
57253 B 12.9
|
||||
57855 E NO DATA
|
||||
59556 E NO DATA
|
||||
61106 E NO DATA
|
||||
61706 V 11
|
||||
61806 B 12.9
|
||||
62256 E NO DATA
|
||||
63856 E NO DATA
|
||||
65406 E NO DATA
|
||||
66056 V 24
|
||||
66156 B 12.9
|
||||
66607 E NO DATA
|
||||
68153 E NO DATA
|
||||
69703 E NO DATA
|
||||
70305 V 31
|
||||
70405 B 12.9
|
||||
70856 E NO DATA
|
||||
72406 E NO DATA
|
||||
73956 E NO DATA
|
||||
74556 V 32
|
||||
74656 B 12.9
|
||||
75106 E NO DATA
|
||||
76657 E NO DATA
|
||||
78207 E NO DATA
|
||||
78807 V 33
|
||||
78907 B 12.9
|
||||
79357 E NO DATA
|
||||
80907 E NO DATA
|
||||
82453 E NO DATA
|
||||
83053 V 31
|
||||
83153 B 12.9
|
||||
83603 E NO DATA
|
||||
85153 E NO DATA
|
||||
86703 E NO DATA
|
||||
87303 V 36
|
||||
87403 B 12.9
|
||||
87853 E NO DATA
|
||||
89403 E NO DATA
|
||||
90953 E NO DATA
|
||||
91554 V 38
|
||||
91654 B 12.9
|
||||
92106 E NO DATA
|
||||
93657 E NO DATA
|
||||
95207 E NO DATA
|
||||
95807 V 34
|
||||
96007 B 12.9
|
||||
96454 E NO DATA
|
||||
98004 E NO DATA
|
||||
99654 E NO DATA
|
||||
100355 V 24
|
||||
100505 B 12.9
|
||||
100955 E NO DATA
|
||||
102506 E NO DATA
|
||||
104057 E NO DATA
|
||||
104654 V 34
|
||||
104754 B 12.9
|
||||
105204 E NO DATA
|
||||
106755 E NO DATA
|
||||
108306 E NO DATA
|
||||
108906 V 41
|
||||
109006 B 12.9
|
||||
117817 E disconnected
|
||||
123303 C OBDII ELM327 v2.1
|
||||
123403 P A6
|
||||
123503 E ATCSM1 OK
|
||||
124203 V 46
|
||||
124303 B 12.9
|
||||
124755 E NO DATA
|
||||
126305 E NO DATA
|
||||
126906 V 45
|
||||
127006 B 12.9
|
||||
127456 E NO DATA
|
||||
129006 E NO DATA
|
||||
129607 V 43
|
||||
129757 B 12.9
|
||||
130207 E NO DATA
|
||||
131757 E NO DATA
|
||||
132357 V 41
|
||||
132457 B 12.9
|
||||
132907 E NO DATA
|
||||
134457 E NO DATA
|
||||
135057 V 39
|
||||
135157 B 12.9
|
||||
135303 I
|
||||
135604 E NO DATA
|
||||
137154 E NO DATA
|
||||
138704 E NO DATA
|
||||
139304 V 22
|
||||
139404 B 12.9
|
||||
139854 E NO DATA
|
||||
141423 M 2
|
||||
141454 E NO DATA
|
||||
143004 E NO DATA
|
||||
143605 V 7
|
||||
143705 B 13.0
|
||||
144155 E NO DATA
|
||||
145706 E NO DATA
|
||||
147256 E NO DATA
|
||||
147856 V 28
|
||||
147956 B 12.9
|
||||
148407 E NO DATA
|
||||
149957 E NO DATA
|
||||
151507 E NO DATA
|
||||
152107 V 43
|
||||
152207 B 12.9
|
||||
152657 E NO DATA
|
||||
154207 E NO DATA
|
||||
155753 E NO DATA
|
||||
156353 V 51
|
||||
156453 B 13.0
|
||||
156904 E NO DATA
|
||||
158455 E NO DATA
|
||||
160005 E NO DATA
|
||||
160605 V 51
|
||||
160705 B 12.9
|
||||
161155 E NO DATA
|
||||
162705 E NO DATA
|
||||
164255 E NO DATA
|
||||
164856 V 53
|
||||
164956 B 12.9
|
||||
165407 E NO DATA
|
||||
166953 E NO DATA
|
||||
168508 E NO DATA
|
||||
169103 V 46
|
||||
169253 B 12.9
|
||||
169703 E NO DATA
|
||||
171254 E NO DATA
|
||||
172805 E NO DATA
|
||||
173406 V 19
|
||||
173506 B 12.9
|
||||
173956 E NO DATA
|
||||
175506 E NO DATA
|
||||
177056 E NO DATA
|
||||
177656 V 3
|
||||
177756 B 12.9
|
||||
178206 E NO DATA
|
||||
179806 E NO DATA
|
||||
181357 E NO DATA
|
||||
181957 V 8
|
||||
182057 B 12.9
|
||||
182507 E NO DATA
|
||||
184057 E NO DATA
|
||||
185603 E NO DATA
|
||||
186203 V 31
|
||||
186304 B 12.9
|
||||
186756 E NO DATA
|
||||
188307 E NO DATA
|
||||
189857 E NO DATA
|
||||
190457 V 45
|
||||
190557 B 13.0
|
||||
191007 E NO DATA
|
||||
192603 E NO DATA
|
||||
194154 E NO DATA
|
||||
194754 V 49
|
||||
194854 B 12.9
|
||||
195304 E NO DATA
|
||||
196855 E NO DATA
|
||||
198406 E NO DATA
|
||||
199006 V 49
|
||||
199106 B 12.9
|
||||
199556 E NO DATA
|
||||
201106 E NO DATA
|
||||
202656 E NO DATA
|
||||
203257 V 50
|
||||
203357 B 12.9
|
||||
203807 E NO DATA
|
||||
205353 E NO DATA
|
||||
206903 E NO DATA
|
||||
207504 V 50
|
||||
207604 B 12.9
|
||||
208054 E NO DATA
|
||||
209604 E NO DATA
|
||||
211155 E NO DATA
|
||||
211755 V 50
|
||||
211855 B 12.9
|
||||
212305 E NO DATA
|
||||
213855 E NO DATA
|
||||
215405 E NO DATA
|
||||
216005 V 50
|
||||
216105 B 12.9
|
||||
216555 E NO DATA
|
||||
218105 E NO DATA
|
||||
219656 E NO DATA
|
||||
220256 V 49
|
||||
220356 B 12.9
|
||||
220806 E NO DATA
|
||||
222357 E NO DATA
|
||||
223903 E NO DATA
|
||||
224503 V 51
|
||||
224603 B 12.9
|
||||
225055 E NO DATA
|
||||
226655 E NO DATA
|
||||
228206 E NO DATA
|
||||
228806 V 46
|
||||
228906 B 12.9
|
||||
229356 E NO DATA
|
||||
230906 E NO DATA
|
||||
232456 E NO DATA
|
||||
233057 V 24
|
||||
233157 B 12.9
|
||||
233603 E NO DATA
|
||||
235153 E NO DATA
|
||||
236703 E NO DATA
|
||||
237303 V 5
|
||||
237403 B 12.9
|
||||
237853 E NO DATA
|
||||
239403 E NO DATA
|
||||
240953 E NO DATA
|
||||
241553 V 0
|
||||
241653 B 12.9
|
||||
242103 E NO DATA
|
||||
243653 E NO DATA
|
||||
245203 E NO DATA
|
||||
245804 V 0
|
||||
245904 B 12.9
|
||||
246355 E NO DATA
|
||||
247906 E NO DATA
|
||||
249456 E NO DATA
|
||||
250056 V 16
|
||||
250156 B 13.0
|
||||
250606 E NO DATA
|
||||
252156 E NO DATA
|
||||
253706 E NO DATA
|
||||
254307 V 37
|
||||
254407 B 12.9
|
||||
254857 E NO DATA
|
||||
256407 E NO DATA
|
||||
257957 E NO DATA
|
||||
258557 V 47
|
||||
258657 B 13.0
|
||||
259107 E NO DATA
|
||||
260653 E NO DATA
|
||||
262203 E NO DATA
|
||||
262805 V 45
|
||||
262905 B 12.9
|
||||
263356 E NO DATA
|
||||
264906 E NO DATA
|
||||
266456 E NO DATA
|
||||
267056 V 44
|
||||
267156 B 13.0
|
||||
267607 E NO DATA
|
||||
269157 E NO DATA
|
||||
270707 E NO DATA
|
||||
271307 V 45
|
||||
271457 B 12.9
|
||||
271907 E NO DATA
|
||||
273457 E NO DATA
|
||||
275007 E NO DATA
|
||||
275607 V 48
|
||||
275707 B 12.9
|
||||
276157 E NO DATA
|
||||
277757 E NO DATA
|
||||
279307 E NO DATA
|
||||
279907 V 47
|
||||
280007 B 12.9
|
||||
280457 E NO DATA
|
||||
282007 E NO DATA
|
||||
283557 E NO DATA
|
||||
284157 V 32
|
||||
284257 B 13.0
|
||||
284707 E NO DATA
|
||||
286457 E NO DATA
|
||||
288003 E NO DATA
|
||||
288653 V 12
|
||||
288753 B 13.0
|
||||
289255 E NO DATA
|
||||
290805 E NO DATA
|
||||
292355 E NO DATA
|
||||
292956 V 13
|
||||
293056 B 13.0
|
||||
293507 E NO DATA
|
||||
295057 E NO DATA
|
||||
296607 E NO DATA
|
||||
297257 V 8
|
||||
297357 B 13.0
|
||||
297804 E NO DATA
|
||||
299404 E NO DATA
|
||||
301054 E NO DATA
|
||||
301705 V 3
|
||||
301805 B 13.0
|
||||
302255 E NO DATA
|
||||
303805 E NO DATA
|
||||
305355 E NO DATA
|
||||
305906 V -1
|
||||
@@ -0,0 +1,210 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
7003 C OBDII ELM327 v2.1
|
||||
7153 P A6
|
||||
7303 E ATCSM1 OK
|
||||
8253 V 0
|
||||
8354 B 13.0
|
||||
8804 E NO DATA
|
||||
10504 E NO DATA
|
||||
11205 V 4
|
||||
11455 B 12.9
|
||||
12006 E NO DATA
|
||||
13806 E NO DATA
|
||||
14457 V 5
|
||||
14557 B 13.0
|
||||
15007 E NO DATA
|
||||
16557 E NO DATA
|
||||
17157 V 5
|
||||
17357 B 13.0
|
||||
19257 E NO DATA
|
||||
19907 V 6
|
||||
20057 B 13.0
|
||||
20507 E NO DATA
|
||||
20507 I
|
||||
22157 E NO DATA
|
||||
23757 E NO DATA
|
||||
25503 E NO DATA
|
||||
26208 V 7
|
||||
26253 B 13.0
|
||||
26508 E OK
|
||||
26908 E OK
|
||||
26908 E >NO DATA
|
||||
27053 E OK
|
||||
28604 E NO DATA
|
||||
30204 E NO DATA
|
||||
31755 E NO DATA
|
||||
32355 V 6
|
||||
32455 B 12.9
|
||||
32956 E NO DATA
|
||||
34506 E NO DATA
|
||||
36106 E NO DATA
|
||||
36706 V 23
|
||||
36806 B 13.0
|
||||
37356 E NO DATA
|
||||
38956 E NO DATA
|
||||
40506 E NO DATA
|
||||
41106 V 41
|
||||
41206 B 12.9
|
||||
41657 E NO DATA
|
||||
43207 E NO DATA
|
||||
44753 E NO DATA
|
||||
45353 V 41
|
||||
45454 B 12.9
|
||||
45904 E NO DATA
|
||||
47455 E NO DATA
|
||||
49005 E NO DATA
|
||||
49605 V 34
|
||||
49705 B 12.9
|
||||
50156 E NO DATA
|
||||
51706 E NO DATA
|
||||
53256 E NO DATA
|
||||
53857 V 28
|
||||
53957 B 12.9
|
||||
54457 E NO DATA
|
||||
54607 N 202
|
||||
56157 E NO DATA
|
||||
56753 V 33
|
||||
56854 B 12.9
|
||||
57304 E NO DATA
|
||||
58904 E NO DATA
|
||||
60455 E NO DATA
|
||||
61055 V 36
|
||||
61155 B 12.9
|
||||
61606 E NO DATA
|
||||
63256 E NO DATA
|
||||
64807 E NO DATA
|
||||
65407 V 40
|
||||
65557 B 12.9
|
||||
66007 E NO DATA
|
||||
67557 E NO DATA
|
||||
69153 E NO DATA
|
||||
69753 V 43
|
||||
69903 B 12.9
|
||||
70354 E NO DATA
|
||||
71904 E NO DATA
|
||||
73504 E NO DATA
|
||||
74255 V 43
|
||||
74355 B 12.9
|
||||
74856 E NO DATA
|
||||
76456 E NO DATA
|
||||
78106 E NO DATA
|
||||
78756 V 42
|
||||
78856 B 12.9
|
||||
79306 E NO DATA
|
||||
80856 E NO DATA
|
||||
82406 E NO DATA
|
||||
83006 V 40
|
||||
83106 B 12.9
|
||||
83556 E NO DATA
|
||||
85107 E NO DATA
|
||||
86653 E NO DATA
|
||||
87253 V 35
|
||||
87403 B 12.9
|
||||
87853 E NO DATA
|
||||
89454 E NO DATA
|
||||
91004 E NO DATA
|
||||
91605 V 26
|
||||
91705 B 12.9
|
||||
92156 E NO DATA
|
||||
93706 E NO DATA
|
||||
95256 E NO DATA
|
||||
95856 V 6
|
||||
95956 B 12.9
|
||||
96406 E NO DATA
|
||||
97957 E NO DATA
|
||||
99507 E NO DATA
|
||||
100103 V 0
|
||||
100203 B 12.9
|
||||
100653 E NO DATA
|
||||
102254 E NO DATA
|
||||
103854 E NO DATA
|
||||
104505 V 15
|
||||
104705 B 12.9
|
||||
105156 E NO DATA
|
||||
106706 E NO DATA
|
||||
108256 E NO DATA
|
||||
108857 V 32
|
||||
108957 B 12.9
|
||||
109507 E NO DATA
|
||||
111057 E NO DATA
|
||||
112603 E NO DATA
|
||||
113203 V 42
|
||||
113303 B 13.0
|
||||
113754 E NO DATA
|
||||
115354 E NO DATA
|
||||
116904 E NO DATA
|
||||
117556 V 42
|
||||
117656 B 12.9
|
||||
118107 E NO DATA
|
||||
119657 E NO DATA
|
||||
121257 E NO DATA
|
||||
121907 V 39
|
||||
122007 B 12.9
|
||||
122457 E NO DATA
|
||||
124057 E NO DATA
|
||||
125603 E NO DATA
|
||||
126253 V 34
|
||||
126353 B 12.9
|
||||
126803 E NO DATA
|
||||
128353 E NO DATA
|
||||
129953 E NO DATA
|
||||
130653 V 29
|
||||
130753 B 12.9
|
||||
131204 E NO DATA
|
||||
132904 E NO DATA
|
||||
134554 E NO DATA
|
||||
135155 V 21
|
||||
135255 B 13.0
|
||||
135705 E NO DATA
|
||||
137255 E NO DATA
|
||||
138856 E NO DATA
|
||||
139556 V 16
|
||||
139656 B 12.9
|
||||
140156 E NO DATA
|
||||
141756 E NO DATA
|
||||
143306 E NO DATA
|
||||
144006 V 10
|
||||
144106 B 12.9
|
||||
144556 E NO DATA
|
||||
146156 E NO DATA
|
||||
147706 E NO DATA
|
||||
148306 V 12
|
||||
148456 B 12.9
|
||||
148956 E NO DATA
|
||||
150506 E NO DATA
|
||||
152156 E NO DATA
|
||||
152806 V 3
|
||||
152906 B 12.9
|
||||
153357 E NO DATA
|
||||
154907 E NO DATA
|
||||
156453 E NO DATA
|
||||
157153 V 4
|
||||
157353 B 12.9
|
||||
157804 E NO DATA
|
||||
159404 E NO DATA
|
||||
161005 E NO DATA
|
||||
161606 V 0
|
||||
161756 B 12.8
|
||||
162207 E NO DATA
|
||||
163807 E NO DATA
|
||||
165503 E NO DATA
|
||||
166204 V 1
|
||||
166404 B 12.9
|
||||
168455 E NO DATA
|
||||
170106 E NO DATA
|
||||
171706 E NO DATA
|
||||
172306 V 0
|
||||
172506 B 12.9
|
||||
173007 E NO DATA
|
||||
174653 E NO DATA
|
||||
176204 E NO DATA
|
||||
176804 V 0
|
||||
176904 B 12.9
|
||||
177355 E NO DATA
|
||||
178905 E NO DATA
|
||||
180455 E NO DATA
|
||||
181055 V 0
|
||||
181205 B 12.9
|
||||
181656 E NO DATA
|
||||
183206 E NO DATA
|
||||
@@ -0,0 +1,473 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
7103 C OBDII ELM327 v2.1
|
||||
7203 P A6
|
||||
7303 E ATCSM1 OK
|
||||
8003 V 0
|
||||
8103 B 12.9
|
||||
8555 E NO DATA
|
||||
10155 E NO DATA
|
||||
10755 V 0
|
||||
10855 B 12.9
|
||||
11405 E NO DATA
|
||||
12956 E NO DATA
|
||||
13556 V 0
|
||||
13656 B 12.9
|
||||
14156 E NO DATA
|
||||
15706 E NO DATA
|
||||
16306 V 0
|
||||
16406 B 12.9
|
||||
16856 E NO DATA
|
||||
18406 E NO DATA
|
||||
19006 V 0
|
||||
19106 B 12.9
|
||||
19206 I
|
||||
19606 E NO DATA
|
||||
21156 E NO DATA
|
||||
22706 E NO DATA
|
||||
23356 V 1
|
||||
23506 B 12.9
|
||||
23957 E NO DATA
|
||||
25557 E NO DATA
|
||||
27107 E NO DATA
|
||||
27753 V 4
|
||||
27853 B 12.9
|
||||
28354 E NO DATA
|
||||
29904 E NO DATA
|
||||
31505 E NO DATA
|
||||
32106 V 5
|
||||
32206 B 12.7
|
||||
32656 E NO DATA
|
||||
34206 E NO DATA
|
||||
35757 E NO DATA
|
||||
36357 V 7
|
||||
36457 B 12.9
|
||||
36903 E NO DATA
|
||||
38453 E NO DATA
|
||||
40053 E NO DATA
|
||||
40703 V 14
|
||||
40803 B 12.9
|
||||
41303 E NO DATA
|
||||
42853 E NO DATA
|
||||
44404 E NO DATA
|
||||
45204 V 11
|
||||
45304 B 12.9
|
||||
45804 E NO DATA
|
||||
47354 E NO DATA
|
||||
48954 E NO DATA
|
||||
49555 V 22
|
||||
49655 B 12.9
|
||||
50106 E NO DATA
|
||||
51657 E NO DATA
|
||||
53353 E NO DATA
|
||||
53954 V 32
|
||||
54054 B 12.9
|
||||
54505 E NO DATA
|
||||
56055 E NO DATA
|
||||
57605 E NO DATA
|
||||
58205 V 35
|
||||
58305 B 12.9
|
||||
58805 E NO DATA
|
||||
60405 E NO DATA
|
||||
61955 E NO DATA
|
||||
62555 V 42
|
||||
62655 B 12.9
|
||||
63106 E NO DATA
|
||||
64656 E NO DATA
|
||||
66207 E NO DATA
|
||||
66807 V 46
|
||||
66907 B 12.9
|
||||
67357 E NO DATA
|
||||
68903 E NO DATA
|
||||
70453 E NO DATA
|
||||
71053 V 37
|
||||
71153 B 12.9
|
||||
71603 E NO DATA
|
||||
73154 E NO DATA
|
||||
74855 E NO DATA
|
||||
75455 V 30
|
||||
75555 B 12.8
|
||||
76055 E NO DATA
|
||||
77656 E NO DATA
|
||||
79206 E NO DATA
|
||||
79906 V 23
|
||||
80106 B 12.9
|
||||
80657 E NO DATA
|
||||
82207 E NO DATA
|
||||
83753 E NO DATA
|
||||
84353 V 37
|
||||
84453 B 12.9
|
||||
84903 E NO DATA
|
||||
86454 E NO DATA
|
||||
88005 E NO DATA
|
||||
88606 V 45
|
||||
88706 B 12.9
|
||||
89156 E NO DATA
|
||||
90706 E NO DATA
|
||||
92256 E NO DATA
|
||||
92856 V 49
|
||||
92956 B 12.9
|
||||
93406 E NO DATA
|
||||
94956 E NO DATA
|
||||
96506 E NO DATA
|
||||
97106 V 51
|
||||
97206 B 12.8
|
||||
97656 E NO DATA
|
||||
99206 E NO DATA
|
||||
100756 E NO DATA
|
||||
101356 V 51
|
||||
101456 B 12.9
|
||||
101906 E NO DATA
|
||||
103456 E NO DATA
|
||||
105006 E NO DATA
|
||||
105606 V 51
|
||||
105706 B 12.9
|
||||
106153 E NO DATA
|
||||
107703 E NO DATA
|
||||
109253 E NO DATA
|
||||
109853 V 50
|
||||
109953 B 12.8
|
||||
110405 E NO DATA
|
||||
111955 E NO DATA
|
||||
113505 E NO DATA
|
||||
114105 V 50
|
||||
114205 B 12.9
|
||||
114655 E NO DATA
|
||||
116205 E NO DATA
|
||||
117755 E NO DATA
|
||||
118355 V 50
|
||||
118455 B 12.9
|
||||
118906 E NO DATA
|
||||
120457 E NO DATA
|
||||
122007 E NO DATA
|
||||
122607 V 50
|
||||
122707 B 12.9
|
||||
123154 E NO DATA
|
||||
124704 E NO DATA
|
||||
126254 E NO DATA
|
||||
126854 V 50
|
||||
126954 B 12.9
|
||||
127404 E NO DATA
|
||||
128954 E NO DATA
|
||||
130505 E NO DATA
|
||||
131106 V 50
|
||||
131206 B 12.9
|
||||
140012 E disconnected
|
||||
145303 C OBDII ELM327 v2.1
|
||||
145403 P A6
|
||||
145503 E ATCSM1 OK
|
||||
146203 V 50
|
||||
146303 B 12.9
|
||||
146753 E NO DATA
|
||||
148303 E NO DATA
|
||||
148904 V 50
|
||||
149004 B 12.8
|
||||
149454 E NO DATA
|
||||
151005 E NO DATA
|
||||
151605 V 50
|
||||
151705 B 12.9
|
||||
152155 E NO DATA
|
||||
153705 E NO DATA
|
||||
154306 V 51
|
||||
154406 B 12.8
|
||||
154857 E NO DATA
|
||||
156407 E NO DATA
|
||||
157007 V 50
|
||||
157157 B 12.9
|
||||
157257 I
|
||||
157607 E NO DATA
|
||||
159157 E NO DATA
|
||||
160753 E NO DATA
|
||||
161353 V 50
|
||||
161453 B 12.9
|
||||
161905 E NO DATA
|
||||
163456 E NO DATA
|
||||
165006 E NO DATA
|
||||
165606 V 50
|
||||
165706 B 12.9
|
||||
166156 E NO DATA
|
||||
167707 E NO DATA
|
||||
169253 E NO DATA
|
||||
169854 V 50
|
||||
169954 B 12.9
|
||||
170405 E NO DATA
|
||||
171955 E NO DATA
|
||||
173506 E NO DATA
|
||||
174106 V 51
|
||||
174206 B 12.8
|
||||
174657 E NO DATA
|
||||
176203 E NO DATA
|
||||
177753 E NO DATA
|
||||
178453 V 48
|
||||
178553 B 12.9
|
||||
179003 E NO DATA
|
||||
180654 E NO DATA
|
||||
182354 E NO DATA
|
||||
182954 V 32
|
||||
183104 B 12.9
|
||||
183604 E NO DATA
|
||||
183755 E OK
|
||||
185356 E NO DATA
|
||||
185957 V 10
|
||||
186057 B 12.9
|
||||
186507 E NO DATA
|
||||
188057 E NO DATA
|
||||
189757 E NO DATA
|
||||
190403 V 2
|
||||
190503 B 12.9
|
||||
190953 E NO DATA
|
||||
192503 E NO DATA
|
||||
194053 E NO DATA
|
||||
194653 V 24
|
||||
194803 B 12.8
|
||||
195254 E NO DATA
|
||||
196805 E NO DATA
|
||||
198355 E NO DATA
|
||||
198955 V 41
|
||||
199055 B 12.8
|
||||
199506 E NO DATA
|
||||
201057 E NO DATA
|
||||
202607 E NO DATA
|
||||
203207 V 44
|
||||
203307 B 12.9
|
||||
203754 E NO DATA
|
||||
205304 E NO DATA
|
||||
206854 E NO DATA
|
||||
207454 V 46
|
||||
207554 B 12.9
|
||||
208004 E NO DATA
|
||||
209555 E NO DATA
|
||||
211105 E NO DATA
|
||||
211705 V 44
|
||||
211805 B 12.9
|
||||
212256 E NO DATA
|
||||
213806 E NO DATA
|
||||
215356 E NO DATA
|
||||
215956 V 37
|
||||
216056 B 12.9
|
||||
216506 E NO DATA
|
||||
218106 E NO DATA
|
||||
219706 E NO DATA
|
||||
220306 V 29
|
||||
220406 B 12.9
|
||||
220856 E NO DATA
|
||||
222406 E NO DATA
|
||||
223957 E NO DATA
|
||||
224557 V 37
|
||||
224657 B 12.9
|
||||
225103 E NO DATA
|
||||
226653 E NO DATA
|
||||
228203 E NO DATA
|
||||
228803 V 41
|
||||
228903 B 12.9
|
||||
229353 E NO DATA
|
||||
230903 E NO DATA
|
||||
232453 E NO DATA
|
||||
233054 V 41
|
||||
233154 B 12.9
|
||||
233606 E NO DATA
|
||||
235156 E NO DATA
|
||||
236706 E NO DATA
|
||||
237306 V 41
|
||||
237406 B 12.9
|
||||
237856 E NO DATA
|
||||
239407 E NO DATA
|
||||
240957 E NO DATA
|
||||
241557 V 38
|
||||
241657 B 12.9
|
||||
242107 E NO DATA
|
||||
243657 E NO DATA
|
||||
245207 E NO DATA
|
||||
245804 V 38
|
||||
245904 B 12.9
|
||||
246355 E NO DATA
|
||||
247905 E NO DATA
|
||||
249455 E NO DATA
|
||||
250056 V 37
|
||||
250156 B 12.9
|
||||
250606 E NO DATA
|
||||
252156 E NO DATA
|
||||
253707 E NO DATA
|
||||
254307 V 37
|
||||
254407 B 12.8
|
||||
254854 E NO DATA
|
||||
256405 E NO DATA
|
||||
257955 E NO DATA
|
||||
258605 V 38
|
||||
258705 B 12.9
|
||||
259155 E NO DATA
|
||||
260705 E NO DATA
|
||||
262255 E NO DATA
|
||||
262905 V 39
|
||||
263005 B 12.8
|
||||
263456 E NO DATA
|
||||
265006 E NO DATA
|
||||
266556 E NO DATA
|
||||
267156 V 40
|
||||
267256 B 12.9
|
||||
267707 E NO DATA
|
||||
269257 E NO DATA
|
||||
270803 E NO DATA
|
||||
271403 V 41
|
||||
271503 B 12.9
|
||||
271954 E NO DATA
|
||||
273505 E NO DATA
|
||||
275055 E NO DATA
|
||||
275655 V 42
|
||||
275755 B 12.9
|
||||
276206 E NO DATA
|
||||
277757 E NO DATA
|
||||
279303 E NO DATA
|
||||
279904 V 45
|
||||
280004 B 12.9
|
||||
280454 E NO DATA
|
||||
282004 E NO DATA
|
||||
283555 E NO DATA
|
||||
284155 V 47
|
||||
284255 B 12.9
|
||||
284705 E NO DATA
|
||||
286255 E NO DATA
|
||||
287805 E NO DATA
|
||||
288406 V 45
|
||||
288506 B 12.9
|
||||
288956 E NO DATA
|
||||
290506 E NO DATA
|
||||
292056 E NO DATA
|
||||
292656 V 43
|
||||
292756 B 12.9
|
||||
293203 E NO DATA
|
||||
294804 E NO DATA
|
||||
296354 E NO DATA
|
||||
297005 V 37
|
||||
297105 B 12.9
|
||||
297555 E NO DATA
|
||||
299105 E NO DATA
|
||||
300755 E NO DATA
|
||||
301355 V 31
|
||||
301505 B 12.9
|
||||
301955 E NO DATA
|
||||
303505 E NO DATA
|
||||
305055 E NO DATA
|
||||
305656 V 34
|
||||
305756 B 12.9
|
||||
306206 E NO DATA
|
||||
307756 E NO DATA
|
||||
309306 E NO DATA
|
||||
309906 V 39
|
||||
310006 B 12.9
|
||||
310507 E NO DATA
|
||||
312053 E NO DATA
|
||||
313603 E NO DATA
|
||||
314203 V 34
|
||||
314303 B 12.9
|
||||
314754 E NO DATA
|
||||
316304 E NO DATA
|
||||
317854 E NO DATA
|
||||
318454 V 35
|
||||
318554 B 12.9
|
||||
319006 E NO DATA
|
||||
320556 E NO DATA
|
||||
322106 E NO DATA
|
||||
322706 V 41
|
||||
322806 B 12.9
|
||||
323256 E NO DATA
|
||||
324807 E NO DATA
|
||||
326353 E NO DATA
|
||||
327004 V 39
|
||||
327104 B 12.9
|
||||
327555 E NO DATA
|
||||
329106 E NO DATA
|
||||
330656 E NO DATA
|
||||
331256 V 22
|
||||
331356 B 12.9
|
||||
331807 E NO DATA
|
||||
333407 E NO DATA
|
||||
335053 E NO DATA
|
||||
335653 V 13
|
||||
335753 B 12.9
|
||||
337953 E NO DATA
|
||||
339503 E NO DATA
|
||||
341053 E NO DATA
|
||||
341654 V 10
|
||||
341754 B 12.9
|
||||
342254 E NO DATA
|
||||
343904 E NO DATA
|
||||
345654 E NO DATA
|
||||
346404 V 17
|
||||
346554 B 12.9
|
||||
347004 E NO DATA
|
||||
348554 E NO DATA
|
||||
350155 E NO DATA
|
||||
350855 V 13
|
||||
350905 B 12.9
|
||||
351105 E NG...
|
||||
351105 E OK
|
||||
351556 E NO DATA
|
||||
353156 E NO DATA
|
||||
353856 V 19
|
||||
354056 B 12.9
|
||||
354503 E NO DATA
|
||||
356053 E NO DATA
|
||||
357603 E NO DATA
|
||||
358203 V 20
|
||||
358303 B 12.9
|
||||
358754 E NO DATA
|
||||
360354 E NO DATA
|
||||
361904 E NO DATA
|
||||
362554 V 16
|
||||
362654 B 12.9
|
||||
363104 E NO DATA
|
||||
364704 E NO DATA
|
||||
366255 E NO DATA
|
||||
366856 V 12
|
||||
367006 B 12.9
|
||||
367456 E NO DATA
|
||||
369007 E NO DATA
|
||||
370657 E NO DATA
|
||||
371458 V -1
|
||||
372104 B 12.9
|
||||
372654 E NO DATA
|
||||
374205 E NO DATA
|
||||
375756 E NO DATA
|
||||
376457 V 12
|
||||
376607 B 12.9
|
||||
377053 E NO DATA
|
||||
378703 E NO DATA
|
||||
380303 E NO DATA
|
||||
380903 V 12
|
||||
381003 B 12.9
|
||||
381453 E NO DATA
|
||||
383004 E NO DATA
|
||||
384554 E NO DATA
|
||||
385204 V 12
|
||||
385304 B 12.9
|
||||
385754 E NO DATA
|
||||
387304 E NO DATA
|
||||
388954 E NO DATA
|
||||
389655 V 6
|
||||
389755 B 12.9
|
||||
390355 E NO DATA
|
||||
392005 E NO DATA
|
||||
393855 E NO DATA
|
||||
394455 V 0
|
||||
394555 B 12.5
|
||||
395006 E NO DATA
|
||||
396556 E NO DATA
|
||||
398207 E NO DATA
|
||||
398857 V 3
|
||||
398957 B 12.9
|
||||
399407 E NO DATA
|
||||
401007 E NO DATA
|
||||
402707 E NO DATA
|
||||
403407 V 1
|
||||
403657 B 12.8
|
||||
404105 E NO DATA
|
||||
405806 E NO DATA
|
||||
407506 E NO DATA
|
||||
408206 V -1
|
||||
408806 B 12.9
|
||||
409306 E NO DATA
|
||||
410907 E NO DATA
|
||||
412553 E NO DATA
|
||||
413153 V 0
|
||||
413303 B 12.9
|
||||
@@ -0,0 +1,3 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
124606 E idle
|
||||
@@ -0,0 +1,2 @@
|
||||
# 12-OBD-Speed CAN log (t = ms since boot)
|
||||
# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note
|
||||
@@ -5,7 +5,7 @@
|
||||
#include <SD_MMC.h>
|
||||
#include <esp_partition.h>
|
||||
|
||||
#include "pincfg.h"
|
||||
#include "sd_card.h"
|
||||
|
||||
#define BG_MAGIC 0x46494742 // "BGIF"
|
||||
#define BG_DATA_OFFSET 4096 // header in the first sector, GIF data after it
|
||||
@@ -78,14 +78,9 @@ static void unmap_partition()
|
||||
map_valid = false;
|
||||
}
|
||||
|
||||
// ---------- SD card ----------
|
||||
static bool sd_mount()
|
||||
{
|
||||
SD_MMC.setPins(SD_MMC_CLK_PIN, SD_MMC_CMD_PIN, SD_MMC_D0_PIN, SD_MMC_D1_PIN, SD_MMC_D2_PIN, SD_MMC_D3_PIN);
|
||||
return SD_MMC.begin() && SD_MMC.cardType() != CARD_NONE;
|
||||
}
|
||||
|
||||
static void sd_unmount() { SD_MMC.end(); }
|
||||
// ---------- SD card (shared with the CAN logger) ----------
|
||||
static bool sd_mount() { return sd_acquire(); }
|
||||
static void sd_unmount() { sd_release(); }
|
||||
|
||||
static void do_list()
|
||||
{
|
||||
|
||||
@@ -0,0 +1,290 @@
|
||||
#include "can_log.h"
|
||||
|
||||
#include <FS.h>
|
||||
#include <Preferences.h>
|
||||
#include <SD_MMC.h>
|
||||
|
||||
#include "sd_card.h"
|
||||
|
||||
#define FLUSH_INTERVAL_MS 2000
|
||||
#define SD_RETRY_MS 10000
|
||||
#define MAX_BUFFER (256 * 1024) // kept in RAM while the SD card is missing; beyond that lines are dropped
|
||||
|
||||
// ---------- shared state (protected by `mtx`) ----------
|
||||
static SemaphoreHandle_t mtx;
|
||||
static volatile bool enabled = false;
|
||||
static String buffer;
|
||||
static uint32_t dropped = 0;
|
||||
static int marks = 0;
|
||||
static String status = "Off";
|
||||
static String phase;
|
||||
static String frames[CANLOG_SLOTS];
|
||||
|
||||
// ---------- writer-owned ----------
|
||||
static bool file_open = false;
|
||||
static String path;
|
||||
static uint32_t written = 0;
|
||||
|
||||
static void lock() { xSemaphoreTake(mtx, portMAX_DELAY); }
|
||||
static void unlock() { xSemaphoreGive(mtx); }
|
||||
|
||||
static void set_status(const String &s)
|
||||
{
|
||||
lock();
|
||||
status = s;
|
||||
unlock();
|
||||
}
|
||||
|
||||
static void update_status()
|
||||
{
|
||||
set_status(path.substring(path.lastIndexOf('/') + 1) + " " + String((written + 512) / 1024) + " KB" +
|
||||
(dropped ? " dropped " + String(dropped) : String()));
|
||||
}
|
||||
|
||||
// New file /canlog/log_NNN.txt with a header describing the format
|
||||
static void open_session()
|
||||
{
|
||||
if (!sd_acquire())
|
||||
{
|
||||
set_status("SD card not found");
|
||||
return;
|
||||
}
|
||||
SD_MMC.mkdir(CANLOG_FOLDER);
|
||||
char name[40];
|
||||
for (int i = 1; i <= 999; i++)
|
||||
{
|
||||
snprintf(name, sizeof(name), CANLOG_FOLDER "/log_%03d.txt", i);
|
||||
if (!SD_MMC.exists(name))
|
||||
break;
|
||||
}
|
||||
File f = SD_MMC.open(name, FILE_WRITE);
|
||||
if (!f)
|
||||
{
|
||||
set_status("Can't create log file");
|
||||
sd_release();
|
||||
return;
|
||||
}
|
||||
f.print("# 12-OBD-Speed CAN log (t = ms since boot)\n"
|
||||
"# C adapter, P protocol, V speed km/h, B battery V, M mark, F id data, N id (no frame), I survey IDs, E note\n");
|
||||
f.close();
|
||||
path = name;
|
||||
written = 0;
|
||||
file_open = true;
|
||||
Serial.println("[log] " + path);
|
||||
update_status();
|
||||
}
|
||||
|
||||
static void flush()
|
||||
{
|
||||
lock();
|
||||
String chunk = std::move(buffer);
|
||||
buffer = String();
|
||||
unlock();
|
||||
if (chunk.length() == 0)
|
||||
return;
|
||||
File f = SD_MMC.open(path, FILE_APPEND);
|
||||
size_t n = f ? f.print(chunk) : 0;
|
||||
if (f)
|
||||
f.close();
|
||||
if (n != chunk.length())
|
||||
{
|
||||
// card gone or full: start over with a new file once it works again
|
||||
file_open = false;
|
||||
sd_release();
|
||||
set_status("SD write failed");
|
||||
return;
|
||||
}
|
||||
written += n;
|
||||
update_status();
|
||||
}
|
||||
|
||||
static void writer_task(void *)
|
||||
{
|
||||
uint32_t next_try = 0;
|
||||
for (;;)
|
||||
{
|
||||
vTaskDelay(pdMS_TO_TICKS(FLUSH_INTERVAL_MS));
|
||||
if (enabled && !file_open && (int32_t)(millis() - next_try) >= 0)
|
||||
{
|
||||
open_session();
|
||||
next_try = millis() + SD_RETRY_MS;
|
||||
}
|
||||
if (file_open)
|
||||
flush();
|
||||
if (!enabled && file_open)
|
||||
{
|
||||
file_open = false;
|
||||
sd_release();
|
||||
set_status("Stopped, saved " + path.substring(path.lastIndexOf('/') + 1));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// ---------- public API ----------
|
||||
void can_log_begin()
|
||||
{
|
||||
mtx = xSemaphoreCreateMutex();
|
||||
Preferences p;
|
||||
p.begin("canlog", true);
|
||||
enabled = p.getBool("on", false);
|
||||
p.end();
|
||||
if (enabled)
|
||||
status = "Waiting for SD card";
|
||||
xTaskCreatePinnedToCore(writer_task, "can_log", 6144, nullptr, 1, nullptr, 0);
|
||||
}
|
||||
|
||||
bool can_log_enabled() { return enabled; }
|
||||
|
||||
void can_log_set_enabled(bool on)
|
||||
{
|
||||
if (on == enabled)
|
||||
return;
|
||||
Preferences p;
|
||||
p.begin("canlog", false);
|
||||
p.putBool("on", on);
|
||||
p.end();
|
||||
lock();
|
||||
if (on)
|
||||
{
|
||||
marks = 0;
|
||||
dropped = 0;
|
||||
status = "Waiting for SD card";
|
||||
}
|
||||
else if (!file_open)
|
||||
{
|
||||
buffer = ""; // never got a file: nothing to save
|
||||
status = "Off";
|
||||
}
|
||||
unlock();
|
||||
enabled = on;
|
||||
}
|
||||
|
||||
void can_log_line(const String &text)
|
||||
{
|
||||
if (!enabled)
|
||||
return;
|
||||
String line = String(millis()) + " " + text + "\n";
|
||||
lock();
|
||||
if (buffer.length() + line.length() <= MAX_BUFFER)
|
||||
buffer += line;
|
||||
else
|
||||
dropped++;
|
||||
unlock();
|
||||
}
|
||||
|
||||
int can_log_mark()
|
||||
{
|
||||
lock();
|
||||
int n = ++marks;
|
||||
unlock();
|
||||
can_log_line("M " + String(n));
|
||||
Serial.printf("[log] mark %d\n", n);
|
||||
return n;
|
||||
}
|
||||
|
||||
int can_log_marks()
|
||||
{
|
||||
lock();
|
||||
int n = marks;
|
||||
unlock();
|
||||
return n;
|
||||
}
|
||||
|
||||
String can_log_status()
|
||||
{
|
||||
lock();
|
||||
String s = status;
|
||||
unlock();
|
||||
return s;
|
||||
}
|
||||
|
||||
static void serial_command(String cmd)
|
||||
{
|
||||
cmd.trim();
|
||||
if (cmd != "ls" && !cmd.startsWith("get "))
|
||||
return;
|
||||
if (!sd_acquire())
|
||||
{
|
||||
Serial.println("<<<ERROR SD card not found>>>");
|
||||
return;
|
||||
}
|
||||
if (cmd == "ls")
|
||||
{
|
||||
Serial.println("<<<LS>>>");
|
||||
File dir = SD_MMC.open(CANLOG_FOLDER);
|
||||
if (dir && dir.isDirectory())
|
||||
for (File f = dir.openNextFile(); f; f = dir.openNextFile())
|
||||
Serial.printf("%s %u\n", f.name(), (unsigned)f.size());
|
||||
Serial.println("<<<END>>>");
|
||||
}
|
||||
else
|
||||
{
|
||||
String name = cmd.substring(4);
|
||||
name.trim();
|
||||
File f = SD_MMC.open(String(CANLOG_FOLDER) + "/" + name);
|
||||
if (!f)
|
||||
Serial.println("<<<ERROR not found>>>");
|
||||
else
|
||||
{
|
||||
Serial.printf("<<<BEGIN %s %u>>>\n", name.c_str(), (unsigned)f.size());
|
||||
static uint8_t buf[1024];
|
||||
int n;
|
||||
while ((n = f.read(buf, sizeof(buf))) > 0)
|
||||
Serial.write(buf, n);
|
||||
f.close();
|
||||
Serial.println("\n<<<END>>>");
|
||||
}
|
||||
}
|
||||
sd_release();
|
||||
}
|
||||
|
||||
void can_log_serial_poll()
|
||||
{
|
||||
static String line;
|
||||
while (Serial.available())
|
||||
{
|
||||
char c = Serial.read();
|
||||
if (c == '\n' || c == '\r')
|
||||
{
|
||||
if (line.length())
|
||||
serial_command(line);
|
||||
line = "";
|
||||
}
|
||||
else if (line.length() < 80)
|
||||
line += c;
|
||||
}
|
||||
}
|
||||
|
||||
void can_log_set_phase(const String &s)
|
||||
{
|
||||
lock();
|
||||
phase = s;
|
||||
unlock();
|
||||
}
|
||||
|
||||
String can_log_phase()
|
||||
{
|
||||
lock();
|
||||
String s = phase;
|
||||
unlock();
|
||||
return s;
|
||||
}
|
||||
|
||||
void can_log_set_frame(int slot, const String &s)
|
||||
{
|
||||
if (slot < 0 || slot >= CANLOG_SLOTS)
|
||||
return;
|
||||
lock();
|
||||
frames[slot] = s;
|
||||
unlock();
|
||||
}
|
||||
|
||||
String can_log_frame(int slot)
|
||||
{
|
||||
if (slot < 0 || slot >= CANLOG_SLOTS)
|
||||
return String();
|
||||
lock();
|
||||
String s = frames[slot];
|
||||
unlock();
|
||||
return s;
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
// CAN logger, to find the Ford cruise/ACC set speed and speed-sign messages: the OBD task records broadcast
|
||||
// CAN frames (ELM327 monitor mode), speed and voltage; the UI adds marks. Lines are appended to
|
||||
// /canlog/log_NNN.txt on the SD card every 2 s (new file per session). All functions are thread-safe.
|
||||
//
|
||||
// Line format: "<ms since boot> <type> <data>"
|
||||
// C adapter info P protocol (ATDPN) V speed km/h (010D) B battery V M mark number
|
||||
// F <id> <data> one CAN frame (hex) N <id> no frame seen I <ids> IDs found by the survey
|
||||
// E <text> adapter message / note
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
#define CANLOG_FOLDER "/canlog"
|
||||
#define CANLOG_SLOTS 3 // frames shown on the log page (the Ford candidate IDs)
|
||||
|
||||
void can_log_begin();
|
||||
bool can_log_enabled();
|
||||
void can_log_set_enabled(bool on); // remembered in NVS
|
||||
void can_log_line(const String &text); // adds the timestamp; ignored while logging is off
|
||||
int can_log_mark(); // logs a mark, returns its number
|
||||
int can_log_marks();
|
||||
String can_log_status(); // file + size, or what is wrong
|
||||
|
||||
// Serial commands for reading the logs on the PC (call from loop()):
|
||||
// "ls" -> one line per file in /canlog: "<name> <size>"
|
||||
// "get <name>" -> "<<<BEGIN <name> <size>>>>", the file, "<<<END>>>"
|
||||
void can_log_serial_poll();
|
||||
|
||||
// Shown on the log page, set by the OBD task
|
||||
void can_log_set_phase(const String &s);
|
||||
String can_log_phase();
|
||||
void can_log_set_frame(int slot, const String &s);
|
||||
String can_log_frame(int slot);
|
||||
+132
-2
@@ -4,11 +4,14 @@
|
||||
// background page (built-in GIF or one from /gifs on the SD card, copied into flash).
|
||||
// Battery voltage is shown as a small arc in the bottom gap; after a while without speed data the
|
||||
// screen goes dark (idle) and wakes on touch or when the engine starts.
|
||||
// Last page: CAN logger (to find the cruise set speed / speed-sign messages); while logging, a tap on
|
||||
// the speed page adds a mark.
|
||||
#include <Arduino.h>
|
||||
#include <Preferences.h>
|
||||
#include "jc3636w518.h"
|
||||
#include "obd_link.h"
|
||||
#include "bg_store.h"
|
||||
#include "can_log.h"
|
||||
|
||||
#define SPEED_MAX 200
|
||||
#define VOLT_MIN_X10 110 // voltage arc range 11.0 .. 15.0 V
|
||||
@@ -28,7 +31,9 @@ static const lv_color_t COLOR_ARC = lv_color_hex(0x00C8FF);
|
||||
static const lv_color_t COLOR_OBD = lv_color_hex(0x4CD964);
|
||||
static const lv_color_t COLOR_PANEL = lv_color_hex(0x161C22);
|
||||
|
||||
static lv_obj_t *tileview, *tile_speed, *tile_menu, *tile_settings, *tile_bg;
|
||||
static lv_obj_t *tileview, *tile_speed, *tile_menu, *tile_settings, *tile_bg, *tile_log;
|
||||
static lv_obj_t *rec_label, *log_status_label, *log_phase_label, *log_frames_label, *log_toggle_label;
|
||||
static uint32_t mark_shown_until = 0;
|
||||
static lv_obj_t *bg_status_label, *bg_list;
|
||||
static std::vector<BgFile> bg_files;
|
||||
static uint32_t bg_list_version = 0, bg_source_version = 0;
|
||||
@@ -209,6 +214,19 @@ static void on_bg_rescan_clicked(lv_event_t *e)
|
||||
bg_request_list();
|
||||
}
|
||||
|
||||
// ---------- CAN log ----------
|
||||
static void add_mark()
|
||||
{
|
||||
if (!can_log_enabled())
|
||||
return;
|
||||
can_log_mark();
|
||||
mark_shown_until = millis() + 1500;
|
||||
}
|
||||
|
||||
static void on_speed_tapped(lv_event_t *e) { add_mark(); }
|
||||
static void on_mark_clicked(lv_event_t *e) { add_mark(); }
|
||||
static void on_log_toggle_clicked(lv_event_t *e) { can_log_set_enabled(!can_log_enabled()); }
|
||||
|
||||
// ---------- speed page ----------
|
||||
static void build_speed_tile()
|
||||
{
|
||||
@@ -289,6 +307,19 @@ static void build_speed_tile()
|
||||
lv_obj_set_style_pad_ver(status_label, 3, 0);
|
||||
lv_label_set_text(status_label, "");
|
||||
lv_obj_align(status_label, LV_ALIGN_CENTER, 0, 100);
|
||||
|
||||
// shown while the CAN logger runs; a tap on the page adds a mark
|
||||
rec_label = lv_label_create(tile_speed);
|
||||
lv_obj_set_style_text_font(rec_label, &lv_font_montserrat_16, 0);
|
||||
lv_obj_set_style_text_color(rec_label, COLOR_TEXT, 0);
|
||||
lv_obj_set_style_bg_color(rec_label, lv_color_hex(0xFF3B30), 0);
|
||||
lv_obj_set_style_bg_opa(rec_label, LV_OPA_80, 0);
|
||||
lv_obj_set_style_radius(rec_label, 12, 0);
|
||||
lv_obj_set_style_pad_hor(rec_label, 10, 0);
|
||||
lv_obj_set_style_pad_ver(rec_label, 3, 0);
|
||||
lv_obj_align(rec_label, LV_ALIGN_TOP_MID, 0, 44);
|
||||
lv_obj_add_flag(rec_label, LV_OBJ_FLAG_HIDDEN);
|
||||
lv_obj_add_event_cb(tile_speed, on_speed_tapped, LV_EVENT_SHORT_CLICKED, NULL);
|
||||
}
|
||||
|
||||
// ---------- menu page ----------
|
||||
@@ -405,6 +436,60 @@ static void build_bg_tile()
|
||||
make_button(tile_bg, "Done", 50, 296, 92, on_done_clicked);
|
||||
}
|
||||
|
||||
static void build_log_tile()
|
||||
{
|
||||
lv_obj_t *title = lv_label_create(tile_log);
|
||||
lv_obj_set_style_text_font(title, &lv_font_montserrat_20, 0);
|
||||
lv_obj_set_style_text_color(title, COLOR_TEXT, 0);
|
||||
lv_label_set_text(title, "CAN log");
|
||||
lv_obj_align(title, LV_ALIGN_TOP_MID, 0, 20);
|
||||
|
||||
log_status_label = lv_label_create(tile_log);
|
||||
lv_obj_set_style_text_color(log_status_label, COLOR_TEXT, 0);
|
||||
lv_obj_set_width(log_status_label, 260);
|
||||
lv_label_set_long_mode(log_status_label, LV_LABEL_LONG_MODE_DOTS);
|
||||
lv_obj_set_style_text_align(log_status_label, LV_TEXT_ALIGN_CENTER, 0);
|
||||
lv_label_set_text(log_status_label, "");
|
||||
lv_obj_align(log_status_label, LV_ALIGN_TOP_MID, 0, 48);
|
||||
|
||||
log_phase_label = lv_label_create(tile_log);
|
||||
lv_obj_set_style_text_color(log_phase_label, COLOR_DIM, 0);
|
||||
lv_obj_set_width(log_phase_label, 290);
|
||||
lv_label_set_long_mode(log_phase_label, LV_LABEL_LONG_MODE_DOTS);
|
||||
lv_obj_set_style_text_align(log_phase_label, LV_TEXT_ALIGN_CENTER, 0);
|
||||
lv_label_set_text(log_phase_label, "");
|
||||
lv_obj_align(log_phase_label, LV_ALIGN_TOP_MID, 0, 68);
|
||||
|
||||
// last frame of the Ford candidate IDs
|
||||
log_frames_label = lv_label_create(tile_log);
|
||||
lv_obj_set_style_text_color(log_frames_label, COLOR_TEXT, 0);
|
||||
lv_obj_set_style_text_font(log_frames_label, &lv_font_montserrat_16, 0);
|
||||
lv_obj_set_style_text_align(log_frames_label, LV_TEXT_ALIGN_CENTER, 0);
|
||||
lv_label_set_text(log_frames_label, "");
|
||||
lv_obj_align(log_frames_label, LV_ALIGN_TOP_MID, 0, 94);
|
||||
|
||||
lv_obj_t *toggle = make_button(tile_log, "", -62, 164, 112, on_log_toggle_clicked);
|
||||
log_toggle_label = lv_obj_get_child(toggle, 0);
|
||||
|
||||
lv_obj_t *mark = lv_button_create(tile_log);
|
||||
lv_obj_set_size(mark, 112, 34);
|
||||
lv_obj_align(mark, LV_ALIGN_TOP_MID, 62, 164);
|
||||
lv_obj_set_style_bg_color(mark, lv_color_hex(0xFF9500), 0);
|
||||
lv_obj_add_event_cb(mark, on_mark_clicked, LV_EVENT_CLICKED, NULL);
|
||||
lv_obj_t *l = lv_label_create(mark);
|
||||
lv_label_set_text(l, "Mark");
|
||||
lv_obj_set_style_text_font(l, &lv_font_montserrat_16, 0);
|
||||
lv_obj_center(l);
|
||||
|
||||
lv_obj_t *hint = lv_label_create(tile_log);
|
||||
lv_obj_set_style_text_color(hint, COLOR_DIM, 0);
|
||||
lv_obj_set_style_text_align(hint, LV_TEXT_ALIGN_CENTER, 0);
|
||||
lv_label_set_text(hint, "While logging: tap the speed page\nto add a mark (sign passed,\nset speed changed). Log files in\n" CANLOG_FOLDER " on the SD card.");
|
||||
lv_obj_align(hint, LV_ALIGN_TOP_MID, 0, 208);
|
||||
|
||||
make_button(tile_log, "Done", 0, 296, 110, on_done_clicked);
|
||||
}
|
||||
|
||||
static void build_ui()
|
||||
{
|
||||
lv_obj_set_style_bg_color(lv_screen_active(), lv_color_hex(0x000000), 0);
|
||||
@@ -414,12 +499,14 @@ static void build_ui()
|
||||
tile_speed = lv_tileview_add_tile(tileview, 0, 0, LV_DIR_RIGHT);
|
||||
tile_menu = lv_tileview_add_tile(tileview, 1, 0, (lv_dir_t)(LV_DIR_LEFT | LV_DIR_RIGHT));
|
||||
tile_settings = lv_tileview_add_tile(tileview, 2, 0, (lv_dir_t)(LV_DIR_LEFT | LV_DIR_RIGHT));
|
||||
tile_bg = lv_tileview_add_tile(tileview, 3, 0, LV_DIR_LEFT);
|
||||
tile_bg = lv_tileview_add_tile(tileview, 3, 0, (lv_dir_t)(LV_DIR_LEFT | LV_DIR_RIGHT));
|
||||
tile_log = lv_tileview_add_tile(tileview, 4, 0, LV_DIR_LEFT);
|
||||
lv_obj_add_event_cb(tileview, on_tile_changed, LV_EVENT_VALUE_CHANGED, NULL);
|
||||
build_speed_tile();
|
||||
build_menu_tile();
|
||||
build_settings_tile();
|
||||
build_bg_tile();
|
||||
build_log_tile();
|
||||
|
||||
idle_overlay = lv_obj_create(lv_layer_top());
|
||||
lv_obj_remove_style_all(idle_overlay);
|
||||
@@ -513,6 +600,43 @@ static void update_speed()
|
||||
}
|
||||
}
|
||||
|
||||
static void set_label(lv_obj_t *label, const String &text)
|
||||
{
|
||||
if (text != lv_label_get_text(label))
|
||||
lv_label_set_text(label, text.c_str());
|
||||
}
|
||||
|
||||
static void update_log()
|
||||
{
|
||||
bool on = can_log_enabled();
|
||||
if (on == lv_obj_has_flag(rec_label, LV_OBJ_FLAG_HIDDEN))
|
||||
{
|
||||
if (on)
|
||||
lv_obj_remove_flag(rec_label, LV_OBJ_FLAG_HIDDEN);
|
||||
else
|
||||
lv_obj_add_flag(rec_label, LV_OBJ_FLAG_HIDDEN);
|
||||
}
|
||||
if (on)
|
||||
{
|
||||
bool flash = (int32_t)(millis() - mark_shown_until) < 0;
|
||||
set_label(rec_label, flash ? "MARK " + String(can_log_marks()) : "REC " + String(can_log_marks()));
|
||||
lv_obj_set_style_bg_color(rec_label, flash ? lv_color_hex(0xFF9500) : lv_color_hex(0xFF3B30), 0);
|
||||
}
|
||||
if (lv_tileview_get_tile_active(tileview) != tile_log)
|
||||
return;
|
||||
set_label(log_toggle_label, on ? "Stop" : "Start");
|
||||
set_label(log_status_label, can_log_status() + (on ? " marks " + String(can_log_marks()) : String()));
|
||||
set_label(log_phase_label, on ? can_log_phase() : String());
|
||||
static const char *names[CANLOG_SLOTS] = {"165 set", "202 acc", "3D9 sign"};
|
||||
String frames;
|
||||
for (int i = 0; i < CANLOG_SLOTS; i++)
|
||||
{
|
||||
String f = can_log_frame(i);
|
||||
frames += String(names[i]) + " " + (f.length() ? f : String("-")) + (i < CANLOG_SLOTS - 1 ? "\n" : "");
|
||||
}
|
||||
set_label(log_frames_label, frames);
|
||||
}
|
||||
|
||||
static lv_obj_t *add_bg_item(const String &text, lv_color_t color, int idx)
|
||||
{
|
||||
lv_obj_t *btn = lv_list_add_button(bg_list, NULL, text.c_str());
|
||||
@@ -630,10 +754,14 @@ void setup()
|
||||
{
|
||||
delay(200);
|
||||
Serial.begin(115200);
|
||||
// internal RAM is tight (draw buffers + BLE); put even small malloc blocks (LVGL objects, Strings) into
|
||||
// PSRAM so the SD driver keeps enough DMA-capable memory. Explicit heap_caps allocations are not affected.
|
||||
heap_caps_malloc_extmem_enable(64);
|
||||
scr_lvgl_init();
|
||||
setRotation(load_rotation());
|
||||
build_ui();
|
||||
obd_set_idle_timeout(load_idle_minutes());
|
||||
can_log_begin();
|
||||
obd_begin();
|
||||
bg_begin();
|
||||
apply_background();
|
||||
@@ -657,9 +785,11 @@ void loop()
|
||||
update_voltage();
|
||||
update_idle();
|
||||
update_bg_source();
|
||||
update_log();
|
||||
if (lv_tileview_get_tile_active(tileview) == tile_bg)
|
||||
update_bg_page();
|
||||
}
|
||||
can_log_serial_poll();
|
||||
if (now - last_menu >= 500 && menu_visible())
|
||||
{
|
||||
last_menu = now;
|
||||
|
||||
+384
-33
@@ -2,6 +2,9 @@
|
||||
|
||||
#include <NimBLEDevice.h>
|
||||
#include <Preferences.h>
|
||||
#include <algorithm>
|
||||
|
||||
#include "can_log.h"
|
||||
|
||||
#define RETRY_DELAY_MS 3000
|
||||
#define IDLE_RETRY_DELAY_MS 30000
|
||||
@@ -9,6 +12,13 @@
|
||||
#define VOLTAGE_INTERVAL_MS 2000 // ATRV while driving
|
||||
#define IDLE_VOLTAGE_INTERVAL_MS 30000 // ATRV while idle (adapter-internal, doesn't wake the car's bus)
|
||||
#define WAKE_VOLTAGE 13.2f // above this the alternator is charging: engine running
|
||||
#define LOG_OBD_INTERVAL_MS 2000 // speed while logging (between monitor windows)
|
||||
#define LOG_SURVEY_MS 1300 // per ID range; > 1 s so slow (1 Hz) messages are seen
|
||||
#define LOG_SURVEY_MAX_LINES 300 // more in one window: split the range
|
||||
#define LOG_CAPTURE_MS 1300 // waiting for one frame of an ID
|
||||
#define LOG_RAW_MS 2000
|
||||
#define LOG_RESURVEY_MS (10 * 60 * 1000)
|
||||
#define LOG_TARGET_EVERY 8 // the candidate IDs after every 8 others
|
||||
|
||||
// ---------- shared state (protected by `mtx`) ----------
|
||||
static SemaphoreHandle_t mtx;
|
||||
@@ -34,6 +44,19 @@ static ObdDevInfo req_dev;
|
||||
static NimBLEClient *client = nullptr;
|
||||
static NimBLERemoteCharacteristic *chr_write = nullptr, *chr_notify = nullptr;
|
||||
static Preferences prefs;
|
||||
static uint32_t next_attempt = 0, next_voltage = 0;
|
||||
static int fails = 0;
|
||||
|
||||
// CAN logging (see can_log.h), worker-owned
|
||||
enum class LogMode
|
||||
{
|
||||
Off, // not logging (or not set up since the last connect)
|
||||
Survey, // finding the IDs on the bus, range by range
|
||||
Capture, // one frame of every known ID in turn
|
||||
Raw, // adapter can't filter by wildcard: unfiltered monitor windows
|
||||
NoCan, // not a CAN car: only speed/voltage are logged
|
||||
};
|
||||
static LogMode log_mode = LogMode::Off;
|
||||
|
||||
static void lock() { xSemaphoreTake(mtx, portMAX_DELAY); }
|
||||
static void unlock() { xSemaphoreGive(mtx); }
|
||||
@@ -122,14 +145,20 @@ static void on_notify(NimBLERemoteCharacteristic *c, uint8_t *data, size_t len,
|
||||
unlock();
|
||||
}
|
||||
|
||||
static bool elm_write(const String &s)
|
||||
{
|
||||
if (!chr_write) // dropped meanwhile (adapter not answering)
|
||||
return false;
|
||||
return chr_write->writeValue((const uint8_t *)s.c_str(), s.length(), !chr_write->canWriteNoResponse());
|
||||
}
|
||||
|
||||
// Sends a command, waits for the '>' prompt. Returns the reply without prompt/CR, or "" on timeout.
|
||||
static String elm_command(const char *cmd, uint32_t timeout_ms)
|
||||
{
|
||||
lock();
|
||||
elm_rx = "";
|
||||
unlock();
|
||||
String line = String(cmd) + "\r";
|
||||
if (!chr_write->writeValue((const uint8_t *)line.c_str(), line.length(), !chr_write->canWriteNoResponse()))
|
||||
if (!elm_write(String(cmd) + "\r"))
|
||||
return "";
|
||||
uint32_t t0 = millis();
|
||||
String rx;
|
||||
@@ -152,6 +181,51 @@ static String elm_command(const char *cmd, uint32_t timeout_ms)
|
||||
return "";
|
||||
}
|
||||
|
||||
static String elm_command(const String &cmd, uint32_t timeout_ms) { return elm_command(cmd.c_str(), timeout_ms); }
|
||||
|
||||
// Monitor mode (ATMA) with the current CAN filter: collects received lines until `max_lines` arrived or `ms`
|
||||
// passed, then stops it with a CR. Returns false if the adapter never came back with a prompt.
|
||||
static bool elm_monitor(uint32_t ms, int max_lines, std::vector<String> &lines)
|
||||
{
|
||||
lines.clear();
|
||||
lock();
|
||||
elm_rx = "";
|
||||
unlock();
|
||||
if (!elm_write("ATMA\r"))
|
||||
return false;
|
||||
bool prompt = false, stop_sent = false;
|
||||
uint32_t t0 = millis(), t_stop = 0;
|
||||
for (;;)
|
||||
{
|
||||
lock();
|
||||
int cr;
|
||||
while ((cr = elm_rx.indexOf('\r')) >= 0)
|
||||
{
|
||||
String line = elm_rx.substring(0, cr);
|
||||
elm_rx.remove(0, cr + 1);
|
||||
line.trim();
|
||||
if (line.length() && line != "STOPPED")
|
||||
lines.push_back(line);
|
||||
}
|
||||
prompt = elm_rx.indexOf('>') >= 0; // monitoring ended (stopped by us, BUFFER FULL, error)
|
||||
unlock();
|
||||
if (prompt)
|
||||
return true;
|
||||
if (!client->isConnected())
|
||||
return false;
|
||||
if (!stop_sent && (millis() - t0 >= ms || (int)lines.size() >= max_lines))
|
||||
{
|
||||
if (!elm_write("\r"))
|
||||
return false;
|
||||
stop_sent = true;
|
||||
t_stop = millis();
|
||||
}
|
||||
if (stop_sent && millis() - t_stop > 1500)
|
||||
return false;
|
||||
vTaskDelay(pdMS_TO_TICKS(5));
|
||||
}
|
||||
}
|
||||
|
||||
// "410D3C" (spaces/headers removed by ATS0/ATH0; multiple ECUs possible) -> 60
|
||||
static int parse_speed(String reply)
|
||||
{
|
||||
@@ -187,6 +261,12 @@ static void disconnect()
|
||||
if (client && client->isConnected())
|
||||
client->disconnect();
|
||||
speed_kmh = -1;
|
||||
if (log_mode != LogMode::Off)
|
||||
{
|
||||
can_log_line("E disconnected");
|
||||
can_log_set_phase("Adapter not connected");
|
||||
}
|
||||
log_mode = LogMode::Off; // ATZ on reconnect resets the adapter: set up again
|
||||
}
|
||||
|
||||
// Finds the ELM UART characteristics: service FFF0 (verified: FFF1 notify + write), else any notify+write pair
|
||||
@@ -271,6 +351,296 @@ static bool connect_and_init()
|
||||
return true;
|
||||
}
|
||||
|
||||
// ---------- speed polling ----------
|
||||
// Counts a missing prompt; after a few the adapter is considered hung and the link is dropped.
|
||||
static void note_no_reply()
|
||||
{
|
||||
if (++fails >= POLL_FAIL_LIMIT)
|
||||
{
|
||||
set_status("Adapter not answering");
|
||||
disconnect();
|
||||
next_attempt = millis() + RETRY_DELAY_MS;
|
||||
}
|
||||
}
|
||||
|
||||
static void poll_speed()
|
||||
{
|
||||
String reply = elm_command("010D", 1500);
|
||||
int v = parse_speed(reply);
|
||||
speed_kmh = v;
|
||||
can_log_line("V " + String(v));
|
||||
if (v >= 0)
|
||||
{
|
||||
fails = 0;
|
||||
last_data_ms = millis();
|
||||
set_status(saved_name.length() ? saved_name : saved_addr);
|
||||
}
|
||||
else if (reply.length() == 0)
|
||||
{
|
||||
// no prompt at all: adapter hung or link dead
|
||||
note_no_reply();
|
||||
}
|
||||
else
|
||||
{
|
||||
// "NO DATA", "UNABLE TO CONNECT", "STOPPED"...: ignition off or ECU busy
|
||||
fails = 0;
|
||||
String r = reply;
|
||||
r.replace("\n", " ");
|
||||
set_status(r.substring(0, 24));
|
||||
vTaskDelay(pdMS_TO_TICKS(500));
|
||||
}
|
||||
}
|
||||
|
||||
// ---------- CAN logging ----------
|
||||
// Ford candidates from opendbc (ford_lincoln_base_pt.dbc, newer Fords - to be confirmed on the Fiesta Mk8):
|
||||
// 0x165 EngBrakeData: Veh_V_DsplyCcSet (cruise set speed as shown), 0x202: Veh_V_RqCcSet (ACC set speed),
|
||||
// 0x3D9 IPMA_Data2: IsaVLim_D_Rq (speed limit from the camera)
|
||||
static const uint16_t LOG_TARGETS[CANLOG_SLOTS] = {0x165, 0x202, 0x3D9};
|
||||
static std::vector<String> survey_queue; // ID patterns still to listen to ("3XX", "3DX", "3D9")
|
||||
static std::vector<uint16_t> log_ids; // all IDs seen, sorted
|
||||
static size_t capture_index = 0;
|
||||
static uint32_t capture_count = 0;
|
||||
static uint32_t next_log_obd = 0, next_survey = 0;
|
||||
static bool exact_filter = false; // adapter supports ATCRA hhh
|
||||
static int id_digits = 3; // 11-bit IDs; 29-bit in Raw mode
|
||||
static bool caf_on = true; // CAN auto formatting (ISO-TP), the adapter's default
|
||||
|
||||
// Monitoring wants the raw frames (CAF off), OBD requests need CAF on (adds/strips the ISO-TP byte)
|
||||
static void set_caf(bool on)
|
||||
{
|
||||
if (on != caf_on && elm_command(on ? "ATCAF1" : "ATCAF0", 1500).length())
|
||||
caf_on = on;
|
||||
}
|
||||
|
||||
// "3D9FE00000000000" (ATH1, ATS0) -> id "3D9", data "FE00000000000000"
|
||||
static bool parse_frame(String line, String &id, String &data)
|
||||
{
|
||||
line.replace(" ", "");
|
||||
if (line.length() < (unsigned)id_digits || (line.length() - id_digits) % 2)
|
||||
return false;
|
||||
for (unsigned i = 0; i < line.length(); i++)
|
||||
if (!isxdigit((unsigned char)line[i]))
|
||||
return false;
|
||||
line.toUpperCase();
|
||||
id = line.substring(0, id_digits);
|
||||
data = line.substring(id_digits);
|
||||
return true;
|
||||
}
|
||||
|
||||
static void note_id(uint16_t id)
|
||||
{
|
||||
auto it = std::lower_bound(log_ids.begin(), log_ids.end(), id);
|
||||
if (it == log_ids.end() || *it != id)
|
||||
log_ids.insert(it, id);
|
||||
}
|
||||
|
||||
// Logs the received lines: frames (at most `per_id` per ID, 0 = all) and adapter messages
|
||||
static void log_lines(const std::vector<String> &lines, int per_id, bool *overflow)
|
||||
{
|
||||
std::vector<std::pair<String, int>> counts;
|
||||
for (const String &line : lines)
|
||||
{
|
||||
String id, data;
|
||||
if (!parse_frame(line, id, data))
|
||||
{
|
||||
if (line.indexOf("BUFFER FULL") >= 0 && overflow)
|
||||
*overflow = true;
|
||||
can_log_line("E " + line);
|
||||
continue;
|
||||
}
|
||||
if (id_digits == 3)
|
||||
note_id((uint16_t)strtol(id.c_str(), nullptr, 16));
|
||||
int n = 0;
|
||||
for (auto &c : counts)
|
||||
if (c.first == id)
|
||||
n = ++c.second;
|
||||
if (n == 0)
|
||||
counts.push_back({id, n = 1});
|
||||
if (per_id == 0 || n <= per_id)
|
||||
can_log_line("F " + id + " " + data);
|
||||
for (int s = 0; s < CANLOG_SLOTS; s++)
|
||||
if (id_digits == 3 && strtol(id.c_str(), nullptr, 16) == LOG_TARGETS[s])
|
||||
can_log_set_frame(s, data);
|
||||
}
|
||||
}
|
||||
|
||||
static String id_hex(uint16_t id)
|
||||
{
|
||||
char b[4];
|
||||
snprintf(b, sizeof(b), "%03X", id);
|
||||
return b;
|
||||
}
|
||||
|
||||
// Waits for one frame of `id`
|
||||
static void capture_id(uint16_t id)
|
||||
{
|
||||
if (elm_command("ATCRA " + id_hex(id), 1500).length() == 0)
|
||||
return note_no_reply();
|
||||
std::vector<String> lines;
|
||||
if (!elm_monitor(LOG_CAPTURE_MS, 1, lines))
|
||||
return note_no_reply();
|
||||
fails = 0;
|
||||
if (lines.empty())
|
||||
can_log_line("N " + id_hex(id));
|
||||
log_lines(lines, 0, nullptr);
|
||||
}
|
||||
|
||||
// Listens to one ID range ("3XX"); a range too busy for the adapter is split into 16 smaller ones
|
||||
static void survey_range(const String &pattern)
|
||||
{
|
||||
if (elm_command("ATCRA " + pattern, 1500).length() == 0)
|
||||
return note_no_reply();
|
||||
std::vector<String> lines;
|
||||
if (!elm_monitor(LOG_SURVEY_MS, LOG_SURVEY_MAX_LINES, lines))
|
||||
return note_no_reply();
|
||||
fails = 0;
|
||||
bool overflow = (int)lines.size() >= LOG_SURVEY_MAX_LINES;
|
||||
log_lines(lines, 2, &overflow);
|
||||
int x = pattern.indexOf('X');
|
||||
if (overflow && x >= 0)
|
||||
for (int d = 0; d < 16; d++)
|
||||
{
|
||||
String child = pattern;
|
||||
child.setCharAt(x, "0123456789ABCDEF"[d]);
|
||||
survey_queue.push_back(child);
|
||||
}
|
||||
}
|
||||
|
||||
static void start_survey()
|
||||
{
|
||||
survey_queue.clear();
|
||||
for (int i = 0; i < 8; i++)
|
||||
survey_queue.push_back(String(i) + "XX");
|
||||
log_mode = LogMode::Survey;
|
||||
}
|
||||
|
||||
// Called once per connection while logging is on: checks the protocol and what the adapter can filter
|
||||
static void log_setup()
|
||||
{
|
||||
can_log_line("C " + (saved_name.length() ? saved_name : saved_addr) + " " + elm_command("ATI", 1500));
|
||||
String dp = elm_command("ATDPN", 1500); // "A6" = auto, ISO 15765-4 CAN 11 bit 500 kbit
|
||||
can_log_line("P " + dp);
|
||||
char p = dp.length() ? dp[dp.length() - 1] : '?';
|
||||
next_log_obd = 0;
|
||||
caf_on = true; // adapter was just reset (ATZ)
|
||||
if (p < '6' || p > '9')
|
||||
{
|
||||
log_mode = LogMode::NoCan;
|
||||
can_log_set_phase("Not a CAN protocol (" + dp + ")");
|
||||
return;
|
||||
}
|
||||
// silent monitoring: the adapter never acknowledges or disturbs frames on the bus
|
||||
can_log_line("E ATCSM1 " + elm_command("ATCSM1", 1500));
|
||||
elm_command("ATH1", 1500); // IDs in front of the data
|
||||
id_digits = (p == '7' || p == '9') ? 8 : 3;
|
||||
exact_filter = id_digits == 3 && elm_command("ATCRA 3D9", 1500).indexOf('?') < 0;
|
||||
bool wildcard = exact_filter && elm_command("ATCRA 7XX", 1500).indexOf('?') < 0;
|
||||
elm_command("ATAR", 1500);
|
||||
if (wildcard)
|
||||
{
|
||||
start_survey();
|
||||
}
|
||||
else
|
||||
{
|
||||
log_mode = LogMode::Raw;
|
||||
can_log_line(String("E no wildcard filter") + (exact_filter ? "" : ", no ID filter") + ": unfiltered");
|
||||
}
|
||||
}
|
||||
|
||||
static void log_stop()
|
||||
{
|
||||
set_caf(true);
|
||||
elm_command("ATAR", 1500);
|
||||
elm_command("ATH0", 1500);
|
||||
log_mode = LogMode::Off;
|
||||
can_log_set_phase("");
|
||||
}
|
||||
|
||||
// One unit of logging work (one ID range / one ID / one raw window), with speed + voltage every 2 s
|
||||
static void log_step()
|
||||
{
|
||||
if (log_mode == LogMode::Off)
|
||||
log_setup();
|
||||
if ((int32_t)(millis() - next_log_obd) >= 0)
|
||||
{
|
||||
next_log_obd = millis() + LOG_OBD_INTERVAL_MS;
|
||||
elm_command("ATAR", 1500); // the ID filter would hide the ECU's reply
|
||||
set_caf(true);
|
||||
poll_speed();
|
||||
if ((int32_t)(millis() - next_voltage) >= 0)
|
||||
{
|
||||
next_voltage = millis() + VOLTAGE_INTERVAL_MS;
|
||||
read_voltage();
|
||||
can_log_line("B " + String(voltage, 1));
|
||||
}
|
||||
return;
|
||||
}
|
||||
if (!client->isConnected() || !chr_write)
|
||||
return;
|
||||
if (log_mode != LogMode::NoCan)
|
||||
set_caf(false);
|
||||
|
||||
switch (log_mode)
|
||||
{
|
||||
case LogMode::Survey:
|
||||
if (survey_queue.empty())
|
||||
{
|
||||
String ids;
|
||||
for (uint16_t id : log_ids)
|
||||
ids += " " + id_hex(id);
|
||||
can_log_line("I" + ids);
|
||||
log_mode = LogMode::Capture;
|
||||
next_survey = millis() + LOG_RESURVEY_MS;
|
||||
break;
|
||||
}
|
||||
{
|
||||
String pattern = survey_queue.front();
|
||||
survey_queue.erase(survey_queue.begin());
|
||||
can_log_set_phase("Survey " + pattern + ": " + log_ids.size() + " IDs, " + survey_queue.size() + " ranges left");
|
||||
survey_range(pattern);
|
||||
}
|
||||
break;
|
||||
case LogMode::Capture:
|
||||
if ((int32_t)(millis() - next_survey) >= 0)
|
||||
{
|
||||
start_survey(); // now and then look for IDs that were quiet before
|
||||
break;
|
||||
}
|
||||
if (capture_count++ % (LOG_TARGET_EVERY + 1) == 0 || log_ids.empty())
|
||||
{
|
||||
for (uint16_t t : LOG_TARGETS)
|
||||
capture_id(t);
|
||||
}
|
||||
else
|
||||
{
|
||||
uint16_t id = log_ids[capture_index++ % log_ids.size()];
|
||||
if (std::find(std::begin(LOG_TARGETS), std::end(LOG_TARGETS), id) == std::end(LOG_TARGETS))
|
||||
capture_id(id);
|
||||
}
|
||||
can_log_set_phase("Capturing " + String(log_ids.size()) + " IDs");
|
||||
break;
|
||||
case LogMode::Raw:
|
||||
{
|
||||
can_log_set_phase("Unfiltered (adapter can't filter)");
|
||||
std::vector<String> lines;
|
||||
if (!elm_monitor(LOG_RAW_MS, LOG_SURVEY_MAX_LINES, lines))
|
||||
return note_no_reply();
|
||||
fails = 0;
|
||||
log_lines(lines, 0, nullptr);
|
||||
if (exact_filter)
|
||||
{
|
||||
for (uint16_t t : LOG_TARGETS)
|
||||
capture_id(t);
|
||||
elm_command("ATAR", 1500);
|
||||
}
|
||||
break;
|
||||
}
|
||||
default: // NoCan: only speed and voltage
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
// ---------- worker task ----------
|
||||
static void load_saved()
|
||||
{
|
||||
@@ -283,9 +653,6 @@ static void load_saved()
|
||||
|
||||
static void worker_task(void *)
|
||||
{
|
||||
uint32_t next_attempt = 0;
|
||||
uint32_t next_voltage = 0;
|
||||
int fails = 0;
|
||||
last_data_ms = millis();
|
||||
for (;;)
|
||||
{
|
||||
@@ -304,6 +671,7 @@ static void worker_task(void *)
|
||||
idle = true;
|
||||
speed_kmh = -1;
|
||||
Serial.println("[obd] idle");
|
||||
can_log_line("E idle");
|
||||
}
|
||||
|
||||
// requests from the UI
|
||||
@@ -381,12 +749,22 @@ static void worker_task(void *)
|
||||
idle = false;
|
||||
last_data_ms = millis();
|
||||
Serial.printf("[obd] wake (%.1f V)\n", voltage);
|
||||
can_log_line("E wake " + String(voltage, 1) + " V");
|
||||
}
|
||||
}
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
continue;
|
||||
}
|
||||
|
||||
// CAN logging on: monitor windows with speed/voltage in between
|
||||
if (can_log_enabled())
|
||||
{
|
||||
log_step();
|
||||
continue;
|
||||
}
|
||||
if (log_mode != LogMode::Off)
|
||||
log_stop();
|
||||
|
||||
if ((int32_t)(millis() - next_voltage) >= 0)
|
||||
{
|
||||
next_voltage = millis() + VOLTAGE_INTERVAL_MS;
|
||||
@@ -394,34 +772,7 @@ static void worker_task(void *)
|
||||
}
|
||||
|
||||
// connected: poll the vehicle speed
|
||||
String reply = elm_command("010D", 1500);
|
||||
int v = parse_speed(reply);
|
||||
speed_kmh = v;
|
||||
if (v >= 0)
|
||||
{
|
||||
fails = 0;
|
||||
last_data_ms = millis();
|
||||
set_status(saved_name.length() ? saved_name : saved_addr);
|
||||
}
|
||||
else if (reply.length() == 0)
|
||||
{
|
||||
// no prompt at all: adapter hung or link dead
|
||||
if (++fails >= POLL_FAIL_LIMIT)
|
||||
{
|
||||
set_status("Adapter not answering");
|
||||
disconnect();
|
||||
next_attempt = millis() + RETRY_DELAY_MS;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
// "NO DATA", "UNABLE TO CONNECT", "STOPPED"...: ignition off or ECU busy
|
||||
fails = 0;
|
||||
String r = reply;
|
||||
r.replace("\n", " ");
|
||||
set_status(r.substring(0, 24));
|
||||
vTaskDelay(pdMS_TO_TICKS(500));
|
||||
}
|
||||
poll_speed();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
#include "sd_card.h"
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <SD_MMC.h>
|
||||
|
||||
#include "pincfg.h"
|
||||
|
||||
static int users = 0;
|
||||
|
||||
static SemaphoreHandle_t mutex()
|
||||
{
|
||||
static SemaphoreHandle_t m = xSemaphoreCreateMutex();
|
||||
return m;
|
||||
}
|
||||
|
||||
bool sd_acquire()
|
||||
{
|
||||
xSemaphoreTake(mutex(), portMAX_DELAY);
|
||||
bool ok = true;
|
||||
if (users == 0)
|
||||
{
|
||||
SD_MMC.setPins(SD_MMC_CLK_PIN, SD_MMC_CMD_PIN, SD_MMC_D0_PIN, SD_MMC_D1_PIN, SD_MMC_D2_PIN, SD_MMC_D3_PIN);
|
||||
ok = SD_MMC.begin() && SD_MMC.cardType() != CARD_NONE;
|
||||
if (!ok)
|
||||
SD_MMC.end();
|
||||
Serial.printf("[sd] mount %s, internal free %u largest %u, dma free %u largest %u\n", ok ? "ok" : "FAILED",
|
||||
heap_caps_get_free_size(MALLOC_CAP_INTERNAL), heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL),
|
||||
heap_caps_get_free_size(MALLOC_CAP_DMA), heap_caps_get_largest_free_block(MALLOC_CAP_DMA));
|
||||
}
|
||||
if (ok)
|
||||
users++;
|
||||
xSemaphoreGive(mutex());
|
||||
return ok;
|
||||
}
|
||||
|
||||
void sd_release()
|
||||
{
|
||||
xSemaphoreTake(mutex(), portMAX_DELAY);
|
||||
if (users > 0 && --users == 0)
|
||||
SD_MMC.end();
|
||||
xSemaphoreGive(mutex());
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
// Shared SD card mount (SD_MMC, 4-bit), reference-counted so the background store and the CAN logger
|
||||
// can use the card at the same time. Thread-safe.
|
||||
#pragma once
|
||||
|
||||
bool sd_acquire(); // mounts the card on first use; false if there is no (working) card
|
||||
void sd_release(); // unmounts when the last user is done
|
||||
@@ -80,7 +80,7 @@ Display color format is `RGB565_SWAPPED` (ST77916 byte order, set in `lv_conf.h`
|
||||
| `2-Program Example/Demo_Arduino` | **Vendor only:** `library/` (3 libs), `lv_conf.h` (vendor original), `sd/` (SD listing example; its lv_conf.h has FATFS edits), `docs/` (setup screenshots + compile instructions). The vendor's original LVGL demo sketch no longer exists unmodified. |
|
||||
| `tools` | `gif_to_360.py` — converts GIFs to 360×360 for the device (Pillow; scale to cover + center crop, keeps frame timing) |
|
||||
| `shared` | **Shared code for all JC3636W518 projects:** `jc3636w518.ini` (PlatformIO base config), `include/lv_conf.h` (LVGL 9.6), `lib/JC3636W518` (board library). See its `README.md` |
|
||||
| `12-OBD-Speed` | **The new program — working in the car (2026-10-23):** speed from the ELM327 over BLE as big number + arc gauge on a GIF background, battery-voltage arc in the bottom gap, idle/screen-off mode (both **verified by the user**); swipe left for the adapter menu (scan, select → remembered in NVS, auto-reconnect every 3 s), again for settings (rotation, idle/screen-off timeout), again for the background (GIF from SD `/gifs` copied into an 11.9 MB raw flash partition, own `partitions.csv`). See its `README.md` |
|
||||
| `12-OBD-Speed` | (+ CAN logger page, 2026-11-02, see "User's car") **The new program — working in the car (2026-10-23):** speed from the ELM327 over BLE as big number + arc gauge on a GIF background, battery-voltage arc in the bottom gap, idle/screen-off mode (both **verified by the user**); swipe left for the adapter menu (scan, select → remembered in NVS, auto-reconnect every 3 s), again for settings (rotation, idle/screen-off timeout), again for the background (GIF from SD `/gifs` copied into an 11.9 MB raw flash partition, own `partitions.csv`). See its `README.md` |
|
||||
| `13-Dash-Mount` | **3D-printed dashboard holder** (OpenSCAD, 2026-10-23; **base printed 2026-10-24, user: "perfect"**): snap-in cup with lip over the bezel + USB-C opening on the side, detent tilt hinge (36 face teeth = 10° steps, M3×20 bolt + captive nut + printed knob), flat foot for VHB tape. ASA. User's choices: adhesive base, detent hinge, M3, cable exits sideways, only a USB-C opening needed. OpenSCAD is installed (`C:\Program Files\OpenSCAD\openscad.exe`, use from bash for `-D part="..."` quoting). See its `README.md` |
|
||||
| `10-GIF-Tests` | **GIF playback experiments** (was `10-OBD-Display-2024`): `display_gif_embedded`, `display_gif_sd`, `assets/gifs`. The 2024 bridge/ELMulator/WiFi speed sketch, the broken LVGL 9 archive and the BLE scanner tool (`11-BLE-Scanner`: on-screen scan, GATT listing, ELM test, LittleFS log) were removed 2026-10-23 — all in git history |
|
||||
| `3-Specification` | Spec sheet (factory firmware features, interface photo) |
|
||||
@@ -107,6 +107,17 @@ AliExpress "ELM327 Mini V2.1 Bluetooth OBD **Dual Mode** 5.1" — dual mode = Bl
|
||||
- **Supported PIDs 01–20** (from `BE 3E A8 13`): 01 monitor status, 03 fuel system, 04 engine load, 05 coolant temp, 06/07 fuel trim B1, **0B intake manifold pressure (MAP)**, **0C RPM**, **0D speed**, 0E timing advance, 0F intake air temp, 11 throttle, 13 O2 sensors, 15 O2 sensor 2, 1C OBD standard, 1F run time, 20 → more PIDs in 21–40. **No 10 (MAF)** → speed-density engine.
|
||||
- Adapter is powered from the car's OBD port (pin 16, 12 V).
|
||||
|
||||
## User's car
|
||||
**Ford Fiesta Mk8, 2018 (pre-facelift), EcoBoost, automatic, EU**, radar ACC; dashboard shows speed signs (traffic sign recognition).
|
||||
User wants (2026-11-02) ACC set speed + speed-limit sign on the puck. Choices: no direct CAN wiring (option C rejected),
|
||||
FORScan possible but not preferred, over-limit warning = a setting (tolerance), items hidden when no data.
|
||||
Plan: first a **CAN logger test drive** (built 2026-11-02 in `12-OBD-Speed`, last page; not yet flashed/tested) to see
|
||||
whether the OBD port (HS-CAN, pins 6/14) carries the messages and the clone can keep up in `ATMA` mode.
|
||||
Candidate IDs from opendbc `ford_lincoln_base_pt.dbc` (newer Fords, only ~40 % of the file read verbatim — re-check bits):
|
||||
`0x165` `Veh_V_DsplyCcSet` 23|8 (+ `CcStat_D_Actl` 10|3), `0x202` `Veh_V_RqCcSet` 32|9 ×0.5 km/h,
|
||||
`0x3D9` IPMA_Data2 `IsaVLim_D_Rq` 7|8 (254 = no data), `IsaVLimUnit_D_Rq` 15|2 (1 kph, 2 mph), cycle 1 s / on change.
|
||||
Fallback if not on the OBD bus: UDS mode 22 requests to the camera module (IPMA) like FORScan.
|
||||
|
||||
## Gotchas / observations
|
||||
- **LVGL 8 GIF bug (patched locally, only relevant if LVGL 8 is used again):** LVGL 8.3.11 `gifdec.c` (`gd_open_gif`) filled the canvas *opaque* with the GIF's background color. GIFs with a transparent background (e.g. `loligod.gif`, bg = RGB 28,29,49) showed that dark gray except where "restore to background" frames had cleared to transparent (→ screen black). **Patched** in the vendor copy `2-Program Example/Demo_Arduino/library/lvgl/src/extra/libs/gif/gifdec.c`: initial canvas alpha 0x00 (marked `LOCAL PATCH`). Re-apply if LVGL is ever replaced/upgraded.
|
||||
- Most GIFs in `assets/gifs` are optimized (transparent unchanged pixels, disposal 1/2); `loligod.gif` has a fully transparent background (~84 % of each frame).
|
||||
|
||||
Reference in new issue
Block a user