Flipdot-display/lib/BROSE9323/BROSE9323.h

#ifndef BROSE9323_H
#define BROSE9323_H

#include <Adafruit_GFX.h>

#include "dot_sequence.h"

//#define FLIPDOT_PLCC_ADAPTER
// ESPSERIAL is set per target via build_flags in platformio.ini (-D ESPSERIAL for the ESP32)

class BROSE9323 : public Adafruit_GFX
{
private:
    uint16_t _flip_time;
    uint16_t _flip_gap = 0;    // pause after each pulse in us, lets the coil supply recover
    uint8_t _pulses = 1;       // pulses for each dot that changed
    uint8_t _effect = EFFECT_INSTANT;
    uint16_t _effect_time = 1500; // ms, how long an effect takes
    uint8_t _effect_flags = 0;    // EFFECT_FLAG_...
    const uint8_t _panel_width;
    const uint8_t _buffer_width;
    const uint16_t _buffer_size;
    uint8_t *_old_buffer = NULL;
    uint8_t *_new_buffer = NULL;
    bool _direct_mode = false;

#ifdef ESPSERIAL
    Stream *stream;
#else
    uint8_t _active_panel = 255;
    uint8_t _active_col = 255;
    uint8_t _active_row = 255;
    bool _active_data;
    // After boot the physical dot state is unknown, so the first display() redraws everything
    bool _force_next = true;

    // A running effect (display() with an effect other than EFFECT_INSTANT)
    DotSequence _sequence;
    bool _animating = false;
    uint8_t _running_effect = EFFECT_INSTANT; // _effect, or the one chosen for EFFECT_RANDOM
    uint8_t _phase = 0;             // EFFECT_FLAP: 0 = to yellow, 1 = the new image
    uint8_t _push_shift = 0;        // EFFECT_PUSH: column shift 1..width
    uint16_t _push_pos = 0;         // EFFECT_PUSH: dot within the shift
    bool _animate_all = false;      // flip every dot, not only the changed ones
    bool _drawing = false;          // the buffer changed since the last display(): pause
    uint32_t _step_time = 0;        // us per step
    uint32_t _next_step = 0;        // micros() of the next step

#ifndef FLIPDOT_PLCC_ADAPTER
    const uint8_t ENABLE = 7,
                  ADDR_0 = 3,
                  ADDR_1 = 5,
                  ADDR_2 = 6,
                  COL_DATA = 4,
                  COL_0 = 8,
                  COL_1 = 10,
                  COL_2 = 9,
                  COL_3 = 11,
                  COL_4 = 12,
                  ROW_0 = A3,
                  ROW_1 = A4,
                  ROW_2 = A2,
                  ROW_3 = A0,
                  ROW_4 = A1,
                  ROW_RESET = 13,
                  ROW_SET = A5;
#else
    const uint8_t RELAY = 2,
                  ENABLE = 3,
                  ADDR_0 = 7,
                  ADDR_1 = 6,
                  ADDR_2 = 5,
                  COL_DATA = 4,
                  COL_0 = 12,
                  COL_1 = 11,
                  COL_2 = 10,
                  COL_3 = 9,
                  COL_4 = 8,
                  ROW_0 = 13, //1 A1 CHECK
        ROW_1 = A0,           //2 A2
        ROW_2 = A1,           //4 A3
        ROW_3 = A2,           //8 13 CHECK
        ROW_4 = A3,           //F A0
        ROW_RESET = A4,
                  ROW_SET = A5;
#endif

    void _selectColumn(uint8_t);
    void _selectPanel(uint8_t);
    void _selectRow(uint8_t);
    void _setData(bool);
    void _strobe(void);
    bool _shown(uint8_t x, uint8_t y) const;
    bool _changed(uint8_t x, uint8_t y) const;
    bool _wanted(uint8_t x, uint8_t y) const;
    void _flipTo(uint8_t x, uint8_t y, bool on, uint8_t pulses);
    void _flipDot(uint8_t x, uint8_t y, uint8_t pulses);
    bool _pushDot(void);
    void _drawAll(bool all);
    void _startEffect(bool all);
#endif
public:
    BROSE9323(uint8_t, uint8_t, uint8_t, uint16_t ft = 280);
#ifdef ESPSERIAL
    void begin(Stream * = &Serial);
#endif
    void begin(void);
    // Shows the buffer: the changed dots, all with force. instant: without the refresh
    // effect (frames of moving content, e.g. scrolling text). ESP32: sends D or D1.
    void display(bool force = false, bool instant = false);
    void drawPixel(int16_t x, int16_t y, uint16_t color);
    void fillScreen(uint16_t);
    void setDirect(bool);
    void setTiming(uint16_t);
    // Pause after each flip pulse in us
    void setGap(uint16_t);
    // Pulses for each changed dot (a second pulse catches dots that didn't flip). Full
    // redraws use one pulse per dot.
    void setPulses(uint8_t);
    // How display() shows a new frame (RefreshEffect), how long it takes in ms (pushing
    // can take longer: it flips many dots per step) and EFFECT_FLAG_... flags.
    // Effects run in steps from update(), so call that often (every loop).
    void setEffect(uint8_t effect, uint16_t time_ms, uint8_t flags = 0);
#ifndef ESPSERIAL
    // Runs the next steps of an effect. Returns busy().
    bool update(void);
    // An effect is running (paused while a new frame is being drawn into the buffer)
    bool busy(void) const;
#endif
#ifndef ESPSERIAL
    void printBuffer(void);
#endif
    size_t print(const char *ifsh);
    // State of a dot as of the last display() call (ESP32: shadow copy for the web UI)
    bool shownPixel(int16_t x, int16_t y) const;
};
#endif //BROSE9323_H