Flipdot-display/lib/BROSE9323/BROSE9323.cpp

#include "BROSE9323.h"

BROSE9323::BROSE9323(uint8_t w, uint8_t h, uint8_t pw, uint16_t ft) : Adafruit_GFX(w, h),
                                                                      _flip_time(ft),
                                                                      _panel_width(pw),
                                                                      _buffer_width((w + 7) / 8),
                                                                      _buffer_size(_buffer_width * h)
{
  // Buffer width should fit at least [width] bits
  //_buffer_width = (w + 7) / 8;

  //_buffer_size = _buffer_width * h;

#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
  _old_buffer = (uint8_t *)calloc(_buffer_size, sizeof(uint8_t));
#endif
  _new_buffer = (uint8_t *)calloc(_buffer_size, sizeof(uint8_t));
}

#ifdef ESPSERIAL
void BROSE9323::begin(Stream *s)
{
  stream = s;
  fillScreen(0);
  setCursor(0, 4);
  print("ESP Connected");
  display();
}
#else
void BROSE9323::begin(void)
{
  digitalWrite(ADDR_0, 1);
  digitalWrite(ADDR_1, 1);
  digitalWrite(ADDR_2, 1);
  digitalWrite(COL_0, 1);
  digitalWrite(COL_1, 1);
  digitalWrite(COL_2, 1);
  digitalWrite(COL_3, 1);
  digitalWrite(COL_4, 1);
  digitalWrite(ROW_0, 1);
  digitalWrite(ROW_1, 1);
  digitalWrite(ROW_2, 1);
  digitalWrite(ROW_3, 1);
  digitalWrite(ROW_4, 1);
  digitalWrite(ROW_RESET, 1);
  digitalWrite(ROW_SET, 1);
  digitalWrite(COL_DATA, 1);
  digitalWrite(ENABLE, 1);
  pinMode(ADDR_0, OUTPUT);
  pinMode(ADDR_1, OUTPUT);
  pinMode(ADDR_2, OUTPUT);
  pinMode(COL_0, OUTPUT);
  pinMode(COL_1, OUTPUT);
  pinMode(COL_2, OUTPUT);
  pinMode(COL_3, OUTPUT);
  pinMode(COL_4, OUTPUT);
  pinMode(ROW_0, OUTPUT);
  pinMode(ROW_1, OUTPUT);
  pinMode(ROW_2, OUTPUT);
  pinMode(ROW_3, OUTPUT);
  pinMode(ROW_4, OUTPUT);
  pinMode(ROW_RESET, OUTPUT);
  pinMode(ROW_SET, OUTPUT);
  pinMode(COL_DATA, OUTPUT);
  pinMode(ENABLE, OUTPUT);
  _setData(1);
  _setData(0);
  fillScreen(1);
  display();
  fillScreen(0);
  display();
}
#endif

void BROSE9323::display(bool force)
{
#ifdef ESPSERIAL
  stream->print("D\n");
  stream->flush();
#else
  if (_direct_mode)
    return;
  for (uint8_t x = 0; x < width(); x++)
  {
    _selectPanel(x / _panel_width);

    _selectColumn(x % _panel_width);

    for (uint8_t y = 0; y < height(); y++)
    {
      bool b = _new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7));
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
      if (!force && (bool)(_old_buffer[y * _buffer_width + x / 8] & (1 << (x & 7))) == b)
      {
        continue;
      }
#endif

      _selectRow(y);

      _setData(_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)));

      _strobe();
    }
  }
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
  // Store currently displayed content in old buffer
  memcpy(_old_buffer, _new_buffer, _buffer_size);
#endif
#endif
}

void BROSE9323::drawPixel(int16_t x, int16_t y, uint16_t color)
{
#ifdef ESPSERIAL
  if (y >= height() || y < 0 || x >= width() || x < 0)
    return;
    
  char s[10];
  sprintf(s, "%c%02x%02x%d\n", _direct_mode ? 'S' : 's', x, y, (bool)color);
  stream->print(s);
  stream->flush();
#else
  if (y >= height() || y < 0 || x >= width() || x < 0)
    return;
  if (color)
  {
    if (_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)))
    {
      return;
    }
    _new_buffer[y * _buffer_width + x / 8] |= 1 << (x & 7);
  }
  else
  {
    if (~_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)))
    {
      return;
    }
    _new_buffer[y * _buffer_width + x / 8] &= ~(1 << (x & 7));
  }
  if (_direct_mode)
  {
    _selectPanel(x / _panel_width);

    _selectColumn(x % _panel_width);

    _selectRow(y);

    _setData(_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)));

    _strobe();
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
    // The dot is flipped now, so the next display() does not have to flip it again
    if (color)
      _old_buffer[y * _buffer_width + x / 8] |= 1 << (x & 7);
    else
      _old_buffer[y * _buffer_width + x / 8] &= ~(1 << (x & 7));
#endif
  }
#endif
}

void BROSE9323::fillScreen(uint16_t color)
{
#ifdef ESPSERIAL
  stream->print(color ? "F1\n" : "F0\n");
#else
  memset(_new_buffer, color ? 0xFF : 0x00, _buffer_size);
  if (_direct_mode)
  {
    _setData(color);
    for (uint8_t x = 0; x < width(); x++)
    {
      if (x % _panel_width == 0)
      {
        _selectPanel(x / _panel_width);
      }

      _selectColumn(x % _panel_width);

      for (uint8_t y = 0; y < height(); y++)
      {
        _selectRow(y);

        _strobe();
      }
    }
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
    memset(_old_buffer, color ? 0xFF : 0x00, _buffer_size);
#endif
  }
#endif
}

void BROSE9323::setTiming(uint16_t t)
{
#ifdef ESPSERIAL
  stream->write('T');
  stream->print(t);
  stream->write('\n');
#else
  _flip_time = t;
#endif
}

void BROSE9323::setDirect(bool d)
{
  _direct_mode = d;
}

#ifndef ESPSERIAL
void BROSE9323::printBuffer(void)
{
  for (uint8_t y = 0; y < height(); y++)
  {
    for (uint8_t x = 0; x < width(); x++)
    {
      Serial.write(_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)) ? '*' : ' ');
    }
    Serial.println();
  }
}

void BROSE9323::_selectColumn(uint8_t col)
{
  if (_active_col == col)
    return;
  _active_col = col;
  col += 1 + col / 7;
  digitalWrite(COL_0, col & 1);
  digitalWrite(COL_1, col & 2);
  digitalWrite(COL_2, col & 4);
  digitalWrite(COL_3, col & 8);
  digitalWrite(COL_4, col & 16);
}

void BROSE9323::_selectPanel(uint8_t panel)
{
  if (_active_panel == panel)
    return;
  _active_panel = panel;
  digitalWrite(ADDR_0, panel & 1);
  digitalWrite(ADDR_1, panel & 2);
  digitalWrite(ADDR_2, panel & 4);
}

void BROSE9323::_selectRow(uint8_t row)
{
  if (_active_row == row)
    return;
  _active_row = row;
  row += row / 7;
  digitalWrite(ROW_0, row & 1);
  digitalWrite(ROW_1, row & 2);
  digitalWrite(ROW_2, row & 4);
  digitalWrite(ROW_3, row & 8);
  digitalWrite(ROW_4, row & 16);
}

void BROSE9323::_setData(bool data)
{
  if (_active_data == data)
    return;
  _active_data = data;
  if (data)
  {
    digitalWrite(ROW_RESET, 1);
    digitalWrite(ROW_SET, 0);
    digitalWrite(COL_DATA, 0);
  }
  else
  {
    digitalWrite(ROW_SET, 1);
    digitalWrite(ROW_RESET, 0);
    digitalWrite(COL_DATA, 1);
  }
}

void BROSE9323::_strobe(void)
{
  digitalWrite(ENABLE, 0);
  delayMicroseconds(_flip_time);
  digitalWrite(ENABLE, 1);
}
#endif

size_t BROSE9323::print(const char *ifsh)
{
  // replace these characters
  /*
   UMLAUT:
   Ä \x8E
   ä \x84
   Ö \x99
   ö \x94
   Ü \x9A
   ü \x81
   ß \xE0
*/
  String temp = ifsh;
  temp.replace("Ä", "\x8E");
  temp.replace("ä", "\x84");
  temp.replace("Ö", "\x99");
  temp.replace("ö", "\x94");
  temp.replace("Ü", "\x9A");
  temp.replace("ü", "\x81");
  temp.replace("ß", "\xE0");

  ifsh = temp.c_str();

  return Adafruit_GFX::print(ifsh);
}