Flipdot-display/src/esp32/net/home_assistant.cpp

#include "net/home_assistant.h"

#include <ArduinoHA.h>
#include <WiFi.h>
#include <algorithm>
#include <string.h>
#include <strings.h>
#include <utils/HADictionary.h>
#include <utils/HASerializer.h>

#include "app.h"
#include "config.h"
#include "credentials.h"
#include "display/bitmap_store.h"
#include "display/page_resources.h"
#include "display/page_store.h"
#include "net/ha_page_select.h"
#include "system/boot_target.h"

static WiFiClient client;
static HADevice device(HA_DEVICE_ID, sizeof(HA_DEVICE_ID));
static HAMqtt mqtt(client, device);

// Unique ids: do not change, Home Assistant's entities are linked to them
static HASwitch powerSwitch("FlipDotDisplayPower");
static HAPageSelect modeSelect("FlipDotDisplayMode");
static HAPageSelect offSelect("FlipDotDisplayOffImage");
static HASensor firmwareSensor("FlipDotDisplayFirmware");
static HASensor ipSensor("FlipDotDisplayIP");
static HAButton recoveryButton("FlipDotDisplayRecovery");
static HASwitch stopwatchSwitch("FlipDotDisplayStopwatch");
static HAButton stopwatchReset("FlipDotDisplayStopwatchReset");
static HASensor shownSensor("FlipDotDisplayShownPage");
static HAButton backButton("FlipDotDisplayBackToSchedule");

// Removed entities: their retained discovery config is cleared, so Home Assistant
// deletes them instead of showing them as unavailable
static const char *const REMOVED_SWITCHES[] = {"FlipDotDisplayClock"};

// A text sensor that is only sent when its value changes, and again after a reconnect
// (HASensor doesn't resend its value by itself)
struct TextSensor
{
	HASensor &sensor;
	char value[64];
	bool sent;

	void set(const char *new_value)
	{
		if (strcmp(new_value, value) == 0)
			return;
		strncpy(value, new_value, sizeof(value) - 1);
		value[sizeof(value) - 1] = '\0';
		sent = false;
	}

	void loop()
	{
		if (!sent && value[0] && mqtt.isConnected())
			sent = sensor.setValue(value);
	}
};

static TextSensor firmware = {firmwareSensor, "", false};
static TextSensor ip = {ipSensor, "", false};
static TextSensor shownPage = {shownSensor, "", false};

static DisplayController *displayController = nullptr;
static bool enabled = false;

// The switches are not optimistic: the new state must be reported back to Home Assistant
static void onPowerCommand(bool state, HASwitch *sender)
{
	displayController->setPowerEnabled(state);
	sender->setState(state);
}

static bool lessName(const String &a, const String &b)
{
	return strcasecmp(a.c_str(), b.c_str()) < 0;
}

// The bitmap names for the dropdowns: built-in ones first, then the uploaded ones
// alphabetically
static std::vector<String> bitmapNames()
{
	std::vector<String> names, uploaded;
	for (const BitmapInfo &b : listBitmaps())
		(b.builtin ? names : uploaded).push_back(b.name);
	std::sort(uploaded.begin(), uploaded.end(), lessName);
	names.insert(names.end(), uploaded.begin(), uploaded.end());
	return names;
}

// The dynamic pages the same way, followed by the bitmaps
static std::vector<String> pageNames()
{
	std::vector<String> names, stored;
	for (const PageInfo &p : listPages())
		(p.builtin ? names : stored).push_back(p.name);
	std::sort(stored.begin(), stored.end(), lessName);
	names.insert(names.end(), stored.begin(), stored.end());
	std::vector<String> bitmaps = bitmapNames();
	names.insert(names.end(), bitmaps.begin(), bitmaps.end());
	return names;
}

// Changes when bitmaps or pages were added or deleted
static uint32_t listRevision()
{
	return bitmapListRevision() + pageListRevision();
}

// A dropdown for a setting that holds a name from the list, or optionally a fixed value
// shown as an extra first option (the blank off image)
struct NameChoice
{
	HAPageSelect &select;
	const char *fixed_option; // shown in Home Assistant; nullptr: no fixed option
	const char *fixed_value;  // stored in the settings
	const char *fallback;     // shown when the setting's name is gone (what the display shows then)
	std::vector<String> (*names)();
	const char *(*setting)();
	const char *(*choose)(const char *value); // returns nullptr or an error

	bool options_loaded;
	uint32_t options_revision;
	bool state_known;
	char state_for[PAGE_NAME_SIZE]; // setting the state was published for
	std::vector<String> options;

	const char *current()
	{
		const char *value = setting();
		if (fixed_option && strcmp(value, fixed_value) == 0)
			return fixed_option;
		for (const String &option : options)
			if (strcasecmp(option.c_str(), value) == 0)
				return option.c_str();
		return fallback;
	}

	// Rebuilds the options when bitmaps or pages were added or deleted and reports the setting
	void update()
	{
		if (!options_loaded || options_revision != listRevision())
		{
			options_loaded = true;
			options_revision = listRevision();
			options.clear();
			if (fixed_option)
				options.push_back(fixed_option);
			std::vector<String> list = names();
			options.insert(options.end(), list.begin(), list.end());
			select.setOptions(options);
			state_known = false;
		}
		if (!state_known || strcmp(state_for, setting()) != 0)
		{
			state_known = true;
			strncpy(state_for, setting(), sizeof(state_for) - 1);
			state_for[sizeof(state_for) - 1] = '\0';
			select.setState(current());
		}
	}

	void command(const char *option)
	{
		const char *error = choose(fixed_option && strcmp(option, fixed_option) == 0 ? fixed_value : option);
		if (error)
			Serial.printf("Home Assistant \"%s\": %s\n", option, error);
		update(); // report the (new) state back
	}
};

// "Clock" is the built-in page (it was a fixed option before, so automations keep working)
static NameChoice mode = {modeSelect, nullptr, nullptr, DEFAULT_PAGE, pageNames,
						  []() { return appSettings().page; }, appSelectPage};
// The blank off image is stored as ""
static NameChoice offImage = {offSelect, "Blank", OFF_PAGE_BLANK, "Blank", bitmapNames,
							  []() { return appSettings().off_page; }, appSelectOffPage};

static void clearRemovedEntities()
{
	for (const char *id : REMOVED_SWITCHES)
	{
		uint16_t length = HASerializer::calculateConfigTopicLength(AHATOFSTR(HAComponentSwitch), id);
		if (length == 0)
			continue;
		char topic[length];
		if (HASerializer::generateConfigTopic(topic, AHATOFSTR(HAComponentSwitch), id))
			mqtt.publish(topic, "", true);
	}
}

void homeAssistantBegin(DisplayController &controller, const HomeAssistantSettings &settings)
{
	displayController = &controller;
	enabled = settings.enabled;
	if (!enabled)
	{
		Serial.println("Home Assistant disabled in the settings");
		return;
	}

	device.setName(HA_DEVICE_NAME);
	device.setSoftwareVersion(HA_SOFTWARE_VERSION);

	powerSwitch.setName("FlipDot Display Power");
	powerSwitch.setIcon("mdi:lightbulb");
	powerSwitch.setCurrentState(controller.powerEnabled());
	powerSwitch.onCommand(onPowerCommand);

	modeSelect.setName("FlipDot Display Mode");
	modeSelect.setIcon("mdi:image-multiple");
	modeSelect.onCommand([](const char *option) { mode.command(option); });
	mode.update();

	offSelect.setName("FlipDot Display Off image");
	offSelect.setIcon("mdi:image-off-outline");
	offSelect.onCommand([](const char *option) { offImage.command(option); });
	offImage.update();

	stopwatchSwitch.setName("FlipDot Display Stopwatch");
	stopwatchSwitch.setIcon("mdi:timer-outline");
	stopwatchSwitch.setCurrentState(stopwatch.running());
	stopwatchSwitch.onCommand([](bool state, HASwitch *sender) {
		appStopwatch(state ? StopwatchAction::Start : StopwatchAction::Stop);
		sender->setState(stopwatch.running());
	});
	stopwatchReset.setName("FlipDot Display Stopwatch reset");
	stopwatchReset.setIcon("mdi:timer-refresh-outline");
	stopwatchReset.onCommand([](HAButton *) { appStopwatch(StopwatchAction::Reset); });

	recoveryButton.setName("FlipDot Display Recovery");
	recoveryButton.setIcon("mdi:lifebuoy");
	recoveryButton.onCommand([](HAButton *) { rebootToRecovery(RecoveryReason::Manual); });

	shownSensor.setName("FlipDot Display Shown page");
	shownSensor.setIcon("mdi:monitor-eye");
	backButton.setName("FlipDot Display Back to schedule");
	backButton.setIcon("mdi:calendar-clock");
	backButton.onCommand([](HAButton *) { appBackToSchedule(); });

	firmwareSensor.setName("FlipDot Display Firmware");
	firmwareSensor.setIcon("mdi:chip");

	ipSensor.setName("FlipDot Display IP");
	ipSensor.setIcon("mdi:ip-network");

	mqtt.onConnected([]() {
		firmware.sent = false;
		shownPage.sent = false;
		ip.sent = false;
		clearRemovedEntities();
	});

	// settings must stay alive: the MQTT library keeps the pointers
	if (settings.host[0])
		mqtt.begin(settings.host, settings.port, settings.user[0] ? settings.user : nullptr,
				   settings.password[0] ? settings.password : nullptr);
	else
		mqtt.begin(BROKER_ADDR, settings.port, MQTT_USER, MQTT_PASSWORD); // secrets.h
}

bool homeAssistantConnected()
{
	return enabled && mqtt.isConnected();
}

void homeAssistantLoop()
{
	if (!enabled)
		return;
	mqtt.loop();

	static uint32_t last_ip = 0;
	if (WiFi.isConnected() && (uint32_t)WiFi.localIP() != last_ip)
	{
		last_ip = WiFi.localIP();
		ip.set(WiFi.localIP().toString().c_str());
	}
	ip.loop();
	shownPage.set(appShownPage());
	shownPage.loop();
	firmware.loop();
	mode.update();
	offImage.update();
	// Started or stopped in the web UI
	if (stopwatchSwitch.getCurrentState() != stopwatch.running())
		stopwatchSwitch.setState(stopwatch.running());
}

void homeAssistantSetFirmwareStatus(const char *status)
{
	firmware.set(status);
}