Flipdot-display/lib/BROSE9323/BROSE9323.cpp

#include "BROSE9323.h"

BROSE9323::BROSE9323(uint8_t w, uint8_t h, uint8_t pw, uint16_t ft) : Adafruit_GFX(w, h),
                                                                      _flip_time(ft),
                                                                      _panel_width(pw),
                                                                      _buffer_width((w + 7) / 8),
                                                                      _buffer_size(_buffer_width * h)
{
  // Buffer width should fit at least [width] bits
  //_buffer_width = (w + 7) / 8;

  //_buffer_size = _buffer_width * h;

#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
  _old_buffer = (uint8_t *)calloc(_buffer_size, sizeof(uint8_t));
#endif
  _new_buffer = (uint8_t *)calloc(_buffer_size, sizeof(uint8_t));
}

#ifdef ESPSERIAL
// Only sets the serial port; the first frame is up to the caller
void BROSE9323::begin(Stream *s)
{
  stream = s;
}
#else
void BROSE9323::begin(void)
{
  digitalWrite(ADDR_0, 1);
  digitalWrite(ADDR_1, 1);
  digitalWrite(ADDR_2, 1);
  digitalWrite(COL_0, 1);
  digitalWrite(COL_1, 1);
  digitalWrite(COL_2, 1);
  digitalWrite(COL_3, 1);
  digitalWrite(COL_4, 1);
  digitalWrite(ROW_0, 1);
  digitalWrite(ROW_1, 1);
  digitalWrite(ROW_2, 1);
  digitalWrite(ROW_3, 1);
  digitalWrite(ROW_4, 1);
  digitalWrite(ROW_RESET, 1);
  digitalWrite(ROW_SET, 1);
  digitalWrite(COL_DATA, 1);
  digitalWrite(ENABLE, 1);
  pinMode(ADDR_0, OUTPUT);
  pinMode(ADDR_1, OUTPUT);
  pinMode(ADDR_2, OUTPUT);
  pinMode(COL_0, OUTPUT);
  pinMode(COL_1, OUTPUT);
  pinMode(COL_2, OUTPUT);
  pinMode(COL_3, OUTPUT);
  pinMode(COL_4, OUTPUT);
  pinMode(ROW_0, OUTPUT);
  pinMode(ROW_1, OUTPUT);
  pinMode(ROW_2, OUTPUT);
  pinMode(ROW_3, OUTPUT);
  pinMode(ROW_4, OUTPUT);
  pinMode(ROW_RESET, OUTPUT);
  pinMode(ROW_SET, OUTPUT);
  pinMode(COL_DATA, OUTPUT);
  pinMode(ENABLE, OUTPUT);
  _setData(1);
  _setData(0);
}
#endif

void BROSE9323::display(bool force, bool instant)
{
#ifdef ESPSERIAL
  stream->print(instant ? "D1\n" : "D\n");
  stream->flush();
  // Shadow copy of what the dots show now (for the web UI)
  memcpy(_old_buffer, _new_buffer, _buffer_size);
#else
  if (_direct_mode)
    return;
  bool all = force || _force_next;
  _force_next = false;
  _drawing = false;
  // An explicit full redraw is always instant (the periodic refresh)
  if (_effect == EFFECT_INSTANT || force || instant)
  {
    _animating = false;
    _drawAll(all);
  }
  else
    _startEffect(all);
#endif
}

void BROSE9323::drawPixel(int16_t x, int16_t y, uint16_t color)
{
#ifdef ESPSERIAL
  if (y >= height() || y < 0 || x >= width() || x < 0)
    return;

  // Shadow copy for the web UI; S (direct mode) is visible right away
  if (color)
    _new_buffer[y * _buffer_width + x / 8] |= 1 << (x & 7);
  else
    _new_buffer[y * _buffer_width + x / 8] &= ~(1 << (x & 7));
  if (_direct_mode)
  {
    if (color)
      _old_buffer[y * _buffer_width + x / 8] |= 1 << (x & 7);
    else
      _old_buffer[y * _buffer_width + x / 8] &= ~(1 << (x & 7));
  }

  char s[10];
  sprintf(s, "%c%02x%02x%d\n", _direct_mode ? 'S' : 's', x, y, (bool)color);
  stream->print(s);
  stream->flush();
#else
  if (y >= height() || y < 0 || x >= width() || x < 0)
    return;
  if (!_direct_mode)
    _drawing = true;
  if (color)
  {
    if (_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)))
    {
      return;
    }
    _new_buffer[y * _buffer_width + x / 8] |= 1 << (x & 7);
  }
  else
  {
    if (~_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)))
    {
      return;
    }
    _new_buffer[y * _buffer_width + x / 8] &= ~(1 << (x & 7));
  }
  if (_direct_mode)
  {
    _selectPanel(x / _panel_width);

    _selectColumn(x % _panel_width);

    // The dot is flipped now, so the next display() does not have to flip it again
    _flipDot(x, y, _pulses);
  }
#endif
}

void BROSE9323::fillScreen(uint16_t color)
{
#ifdef ESPSERIAL
  memset(_new_buffer, color ? 0xFF : 0x00, _buffer_size);
  stream->print(color ? "F1\n" : "F0\n");
#else
  memset(_new_buffer, color ? 0xFF : 0x00, _buffer_size);
  if (!_direct_mode)
    _drawing = true;
  if (_direct_mode)
  {
    _setData(color);
    for (uint8_t x = 0; x < width(); x++)
    {
      if (x % _panel_width == 0)
      {
        _selectPanel(x / _panel_width);
      }

      _selectColumn(x % _panel_width);

      for (uint8_t y = 0; y < height(); y++)
      {
        _selectRow(y);

        _strobe();
      }
    }
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
    memset(_old_buffer, color ? 0xFF : 0x00, _buffer_size);
    _force_next = false;
#endif
  }
#endif
}

void BROSE9323::setTiming(uint16_t t)
{
#ifdef ESPSERIAL
  stream->write('T');
  stream->print(t);
  stream->write('\n');
#else
  _flip_time = t;
#endif
}

void BROSE9323::setGap(uint16_t t)
{
#ifdef ESPSERIAL
  stream->write('G');
  stream->print(t);
  stream->write('\n');
#else
  _flip_gap = t;
#endif
}

void BROSE9323::setPulses(uint8_t n)
{
#ifdef ESPSERIAL
  stream->write('N');
  stream->print(n);
  stream->write('\n');
#else
  _pulses = n ? n : 1;
#endif
}

void BROSE9323::setEffect(uint8_t effect, uint16_t time_ms, uint8_t flags)
{
#ifdef ESPSERIAL
  stream->write('E');
  stream->print(effect);
  stream->write(',');
  stream->print(time_ms);
  stream->write(',');
  stream->print(flags);
  stream->write('\n');
#else
  _effect = effect < EFFECT_COUNT ? effect : EFFECT_INSTANT;
  _effect_time = time_ms;
  _effect_flags = flags;
#endif
}

void BROSE9323::setDirect(bool d)
{
  _direct_mode = d;
}

#ifndef ESPSERIAL
void BROSE9323::printBuffer(void)
{
  for (uint8_t y = 0; y < height(); y++)
  {
    for (uint8_t x = 0; x < width(); x++)
    {
      Serial.write(_new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7)) ? '*' : ' ');
    }
    Serial.println();
  }
}

void BROSE9323::_selectColumn(uint8_t col)
{
  if (_active_col == col)
    return;
  _active_col = col;
  col += 1 + col / 7;
  digitalWrite(COL_0, col & 1);
  digitalWrite(COL_1, col & 2);
  digitalWrite(COL_2, col & 4);
  digitalWrite(COL_3, col & 8);
  digitalWrite(COL_4, col & 16);
}

void BROSE9323::_selectPanel(uint8_t panel)
{
  if (_active_panel == panel)
    return;
  _active_panel = panel;
  digitalWrite(ADDR_0, panel & 1);
  digitalWrite(ADDR_1, panel & 2);
  digitalWrite(ADDR_2, panel & 4);
}

void BROSE9323::_selectRow(uint8_t row)
{
  if (_active_row == row)
    return;
  _active_row = row;
  row += row / 7;
  digitalWrite(ROW_0, row & 1);
  digitalWrite(ROW_1, row & 2);
  digitalWrite(ROW_2, row & 4);
  digitalWrite(ROW_3, row & 8);
  digitalWrite(ROW_4, row & 16);
}

void BROSE9323::_setData(bool data)
{
  if (_active_data == data)
    return;
  _active_data = data;
  if (data)
  {
    digitalWrite(ROW_RESET, 1);
    digitalWrite(ROW_SET, 0);
    digitalWrite(COL_DATA, 0);
  }
  else
  {
    digitalWrite(ROW_SET, 1);
    digitalWrite(ROW_RESET, 0);
    digitalWrite(COL_DATA, 1);
  }
}

void BROSE9323::_strobe(void)
{
  digitalWrite(ENABLE, 0);
  delayMicroseconds(_flip_time);
  digitalWrite(ENABLE, 1);
  if (_flip_gap)
    delayMicroseconds(_flip_gap);
}

// What the panel shows now (without an old buffer: unknown, so the opposite of the
// wanted state, which makes every dot count as changed)
bool BROSE9323::_shown(uint8_t x, uint8_t y) const
{
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
  return _old_buffer[y * _buffer_width + x / 8] & (1 << (x & 7));
#else
  return !_wanted(x, y);
#endif
}

bool BROSE9323::_changed(uint8_t x, uint8_t y) const
{
  return _shown(x, y) != _wanted(x, y);
}

bool BROSE9323::_wanted(uint8_t x, uint8_t y) const
{
  return _new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7));
}

// Flip one dot and remember that it is shown
void BROSE9323::_flipTo(uint8_t x, uint8_t y, bool on, uint8_t pulses)
{
  _selectPanel(x / _panel_width);
  _selectColumn(x % _panel_width);
  _selectRow(y);
  _setData(on);
  for (uint8_t i = 0; i < pulses; i++)
    _strobe();
#if !defined(__AVR_ATmega168P__) && !defined(__AVR_ATmega168PB__) && !defined(__AVR_ATmega168__)
  if (on)
    _old_buffer[y * _buffer_width + x / 8] |= 1 << (x & 7);
  else
    _old_buffer[y * _buffer_width + x / 8] &= ~(1 << (x & 7));
#endif
}

// Flip one dot to its state in the new buffer
void BROSE9323::_flipDot(uint8_t x, uint8_t y, uint8_t pulses)
{
  _flipTo(x, y, _wanted(x, y), pulses);
}

// Column by column, as fast as possible. all: also the dots that look unchanged (one
// pulse each, they are only repeated in case they didn't flip before).
void BROSE9323::_drawAll(bool all)
{
  for (uint8_t x = 0; x < width(); x++)
    for (uint8_t y = 0; y < height(); y++)
    {
      bool changed = _changed(x, y);
      if (changed || all)
        _flipDot(x, y, changed ? _pulses : 1);
    }
}

void BROSE9323::_startEffect(bool all)
{
  uint16_t total = (uint16_t)width() * height();
  uint16_t changed = 0;
  for (uint8_t y = 0; y < height(); y++)
    for (uint8_t x = 0; x < width(); x++)
      changed += _changed(x, y);
  if (changed == 0 && !all)
  {
    _animating = false;
    return;
  }
  // E.g. only the clock's minutes get the effect, a new page appears at once
  if ((_effect_flags & EFFECT_FLAG_SMALL_ONLY) && (all || changed > total / 10))
  {
    _animating = false;
    _drawAll(all);
    return;
  }

  uint8_t effect = _effect;
  if (effect == EFFECT_RANDOM)
    effect = 1 + micros() % (EFFECT_RANDOM - 1);
  // Pushing needs to know what is shown; after boot that is unknown
  if (all && effect == EFFECT_PUSH)
    effect = EFFECT_WIPE;
  _running_effect = effect;
  _animate_all = all;
  _phase = 0;

  uint32_t steps;
  if (effect == EFFECT_PUSH)
  {
    // One step per column shift; the dots of a shift are flipped as fast as possible
    _push_shift = 1;
    _push_pos = 0;
    steps = width();
  }
  else
  {
    _sequence.begin(effect == EFFECT_FLAP ? EFFECT_WIPE : effect, width(), height(), (uint16_t)micros());
    // Sparkle: only the changed dots take time, so a small change sparkles as long as a big one
    steps = (effect == EFFECT_SPARKLE && !all) ? changed : total;
    if (effect == EFFECT_FLAP)
      steps *= 2;
  }
  _step_time = (uint32_t)_effect_time * 1000 / steps;
  _next_step = micros();
  _animating = true;
}

// One dot of the current push step. Shift s (1..width) shows old columns s.. on the left
// and new columns 0..s-1 on the right: each column takes over its right neighbour (not
// changed yet in this step, as the columns go left to right), the last one a new column.
// False when the last shift is done.
bool BROSE9323::_pushDot(void)
{
  uint8_t w = width(), h = height();
  uint8_t x = _push_pos / h, y = _push_pos % h;
  bool target = x + 1 < w ? _shown(x + 1, y) : _wanted(_push_shift - 1, y);
  if (_shown(x, y) != target)
    _flipTo(x, y, target, _push_shift == w ? _pulses : 1);
  if (++_push_pos < (uint16_t)w * h)
    return true;
  _push_pos = 0;
  _next_step += _step_time;
  return ++_push_shift <= w;
}

bool BROSE9323::busy(void) const
{
  return _animating && !_drawing;
}

bool BROSE9323::update(void)
{
  // Wait for the D that ends the frame being drawn, it starts the effect again
  if (!_animating || _drawing)
    return busy();

  // At most about 1 ms per call, so loop() keeps reading the serial port
  uint32_t start = micros();
  while ((int32_t)(micros() - _next_step) >= 0 && micros() - start < 1000)
  {
    if (_running_effect == EFFECT_PUSH)
    {
      if (!_pushDot())
      {
        _animating = false;
        break;
      }
      continue;
    }

    uint8_t x, y;
    if (!_sequence.next(x, y))
    {
      if (_running_effect == EFFECT_FLAP && _phase == 0)
      {
        // Everything is yellow now: reveal the new image
        _phase = 1;
        _sequence.begin(EFFECT_WIPE, width(), height(), 0);
        continue;
      }
      _animating = false;
      break;
    }
    // Flap: first every dot to yellow (one pulse), then the new image
    bool yellow_phase = _running_effect == EFFECT_FLAP && _phase == 0;
    bool target = yellow_phase ? true : _wanted(x, y);
    bool changed = _shown(x, y) != target;
    if (!changed && !_animate_all)
    {
      if (_running_effect == EFFECT_SPARKLE)
        continue; // unchanged dots take no time
    }
    else
      _flipTo(x, y, target, changed && !yellow_phase ? _pulses : 1);
    _next_step += _step_time;
  }
  return busy();
}
#endif

size_t BROSE9323::print(const char *ifsh)
{
  // replace these characters
  /*
   UMLAUT:
   Ä \x8E
   ä \x84
   Ö \x99
   ö \x94
   Ü \x9A
   ü \x81
   ß \xE0
*/
  String temp = ifsh;
  temp.replace("Ä", "\x8E");
  temp.replace("ä", "\x84");
  temp.replace("Ö", "\x99");
  temp.replace("ö", "\x94");
  temp.replace("Ü", "\x9A");
  temp.replace("ü", "\x81");
  temp.replace("ß", "\xE0");

  ifsh = temp.c_str();

  return Adafruit_GFX::print(ifsh);
}
bool BROSE9323::shownPixel(int16_t x, int16_t y) const
{
  if (y >= height() || y < 0 || x >= width() || x < 0)
    return false;
#if defined(__AVR_ATmega168P__) || defined(__AVR_ATmega168PB__) || defined(__AVR_ATmega168__)
  return _new_buffer[y * _buffer_width + x / 8] & (1 << (x & 7));
#else
  return _old_buffer[y * _buffer_width + x / 8] & (1 << (x & 7));
#endif
}