Public Access
mangavalkandClaude Opus 5.5
4749f9e596
- New flash layout (partitions.csv): factory = recovery app, ota_0/ota_1 = clock firmware; esp32_usb uploads to ota_0 so it never overwrites it - src/recovery: WiFi + OTA + web page only. Opens the password protected 'FlipDot-Setup' AP with a captive portal when WiFi fails, lets you pick another WiFi (stored in NVS, used by both apps), start the clock or stay - Recovery is started when the clock firmware can't connect to WiFi, crashes 3 times, after 3 quick power cycles, from a new Home Assistant button, or by the bootloader when no clock firmware works - Shared NVS store and boot switching in src/esp32/system - Clock firmware keeps working on the old flash layout (falls back to OTA-only safe mode) - README: recovery app, one-time USB installation; tests: 65 total Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
13 lines
539 B
CSV
13 lines
539 B
CSV
# ESP32 flash layout (4 MB). See README.md "Recovery app".
|
|
#
|
|
# factory recovery app (src/recovery): WiFi setup portal + OTA, never changed by OTA
|
|
# ota_0/1 clock firmware (src/esp32), updated over OTA in turns, with rollback
|
|
#
|
|
# Name, Type, SubType, Offset, Size
|
|
nvs, data, nvs, 0x9000, 0x5000
|
|
otadata, data, ota, 0xe000, 0x2000
|
|
factory, app, factory, 0x10000, 0x100000
|
|
ota_0, app, ota_0, 0x110000, 0x170000
|
|
ota_1, app, ota_1, 0x280000, 0x170000
|
|
coredump, data, coredump, 0x3F0000, 0x10000
|