Slow mode (Home Assistant switch "FlipDot Display Slow mode", dropdown
"FlipDot Display Slow mode interval", web UI Settings) makes the display
change only every 1, 2, 5, 10, 15, 20, 30 or 60 minutes, on the clock, and
powers it off in between: less noise. Nothing else is drawn meanwhile, also
no page changes. It updates at once after boot, the night, the Power switch
and live mode, and when it is switched off. Rules can override it ("show at
once in slow mode"): while their page is shown the display works normally.
Settings layout 7 and schedule layout 4 (older records are converted; they
are stored again once the firmware is marked good, so a rollback still
finds the old ones). Pages in older formats are rewritten in the current
one, in time-boxed steps. /api/status reports old_data_left.
Version 2.15.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pages choose their own refresh effect (or the Hardware setting), used when
the page appears and for its own changes. Schedule blocks that switch
instantly and rules still switch instantly. The ESP32 sends page effects
to the Nano with a new no-save flag (E ...,2), so page switches don't wear
the Nano's EEPROM. Page format 7 (version 6 pages are converted).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Home Assistant attributes can be paths into lists (forecast.1.condition).
- Date elements can show a day ahead (day offset 0-7).
- Pages hold 16 elements (page format 6; the old formats are frozen at 8).
Pages are reset in place (clearPage), not through a 4 KB temporary.
- Verwachting page: today (icon, temperature, max/min) and the next 2
days with 7 x 7 icons (weer7 <condition>), from a template sensor
(docs/home-assistant.md).
- examples/home-pages.json is exported from the display with all pages
and their icons, private entity id parts replaced by placeholders
(tools/export_examples.py replaces tools/make_example_pages.py).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stored as icons at boot from the firmware's bitmaps (cut to 80 x 19), so
they can be edited; the firmware copies stay the fallback.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Rules: "also over a page chosen by hand" (on by default); off, a rule
waits until the manual pick ends. Schedule store version 3, version 2
records are read with the option on.
- The Clock page is stored at boot from the built-in one and can be
edited; Reset (deleting it) brings back the original.
- Home Assistant attributes were never found: ArduinoJson 7.4 takes a
char array key as a literal of its full array length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bitmaps that only pages use (backgrounds, images by state) are now icons:
own width and height, stored in /icons, not in the page lists or the Home
Assistant dropdowns. Page backgrounds and image elements use icons or
bitmaps; the renderer gets icons expanded at the top left, so pages look
the same. Web UI: Icons tab with an editor, Make icon / Make bitmap, Save
as icon on the Draw tab, icons in the backup.
A one-time migration in time-boxed steps moves the uploaded bitmaps that
only pages use, after the new firmware is marked good.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5
