Commit Graph
3 Commits
Author SHA1 Message Date
mangavalkandClaude Opus 5.5 8fcb17c395 Matrix refresh effect, and Random really picks from all effects
Yellow streaks fall down the columns that changed, at random moments, and
leave the new image behind them. The start ticks come from a hash, so the
only new RAM is one bit per column. Only a dot's final flip gets all pulses.

Random took micros() % 8, but micros() only gives multiples of 4 on the
Nano, so it could only pick sparkle or diagonal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 02:28:34 +01:00
mangavalkandClaude Opus 5.5 7a28e34380 Fix dense images on the Nano and the off image in slow mode
- Nano: B data is drawn fast enough for the serial line. A hex digit arrives
  every 87 us; with a division and four drawPixel() calls per digit a lit
  digit took about 105 us, so dense frames (all yellow, the panda bitmap)
  overflowed the 64 byte receive buffer: frames not shown or wrong, "Line
  too long", frame check repairs that failed the same way. Now the parser
  counts columns and rows and BROSE9323::drawDots() sets the 4 dots
  (about 20 us).
- ESP32: Power off and the start of the night draw the off image also when
  slow mode had the power off already (it powers on for it, once)
- Tests: drawDots() against drawPixel(), off image in slow mode
- Version 2.19.3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 00:24:14 +02:00
mangavalkandClaude Opus 5.5 090c2bf8ae Fix shifted pictures: non-blocking Nano drawing, frame check, refresh settings
The Nano's periodic full redraw blocked for ~0.8 s. A frame that arrived
meanwhile overflowed its 64-byte serial buffer; lost bytes in a bitmap
shift the rest of the image (picture moved up), and diff frames never
repaired it.

- Nano: all drawing (frames, effects, the dot refresh) runs from update()
  in ~1 ms slices; the refresh pauses while a frame is received or shown
- New commands: C (reply with the image checksum) and I (refresh minutes,
  EEPROM)
- ESP32: NanoMonitor asks for the checksum after frames and sends the whole
  image again on a mismatch, missing answer or Nano restart; counts ERR
  replies. Periodic whole-image resync.
- Settings: "Dot refresh" and "Image resync" intervals (settings v5,
  v4 records are migrated)
- System tab: loop timing, free memory, frame check counts
- test_driver: the real driver against a simulated panel

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-16 15:20:26 +02:00