Restructure ESP32 firmware into modules, fix bugs, add tests

Structure (src/esp32/):
- logic/: DisplayController, schedule, power timer, LED pattern; pure C++
- display/: FlipdotFrames and bitmaps
- nano_link/: NanoLink (relay, serial, READY, bootloader) and flash bridge
- net/: WiFi/OTA/panic window, Home Assistant
- config.h with all settings; libs.h (globals in a header) removed

Bug fixes:
- Home Assistant switches now report their state back and start as ON
- loop() no longer blocks: WiFi.waitForConnectResult() (up to 60 s
  without WiFi) and getLocalTime() (5 s before NTP sync) were called
  every iteration
- Power switch off now powers off after 1 s even when a 30 s countdown
  is already running
- millis() overflow safe power-off timer; no frame catch-up bursts
- No garbage time string before NTP sync; 'Connecting...' stays instead
- Frames are only sent when the screen changes instead of every second
- Reset reasons are logged once instead of every 100 ms
- Removed dead code (unused fonts, WiFiMulti, rotated bitmap, ...)

Tests: new test_esp32 environment (26 tests); native renamed to test_nano

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

src/esp32/net/home_assistant.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include "logic/display_controller.h"
+
+// Home Assistant integration over MQTT (with discovery). Two switches:
+//   FlipDot Display Clock  on = clock, off = Nintendo logo
+//   FlipDot Display Power  off = clear the display and switch it off
+void homeAssistantBegin(DisplayController &controller);
+void homeAssistantLoop();