Public Access
Restructure ESP32 firmware into modules, fix bugs, add tests
Structure (src/esp32/): - logic/: DisplayController, schedule, power timer, LED pattern; pure C++ - display/: FlipdotFrames and bitmaps - nano_link/: NanoLink (relay, serial, READY, bootloader) and flash bridge - net/: WiFi/OTA/panic window, Home Assistant - config.h with all settings; libs.h (globals in a header) removed Bug fixes: - Home Assistant switches now report their state back and start as ON - loop() no longer blocks: WiFi.waitForConnectResult() (up to 60 s without WiFi) and getLocalTime() (5 s before NTP sync) were called every iteration - Power switch off now powers off after 1 s even when a 30 s countdown is already running - millis() overflow safe power-off timer; no frame catch-up bursts - No garbage time string before NTP sync; 'Connecting...' stays instead - Frames are only sent when the screen changes instead of every second - Reset reasons are logged once instead of every 100 ms - Removed dead code (unused fonts, WiFiMulti, rotated bitmap, ...) Tests: new test_esp32 environment (26 tests); native renamed to test_nano Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed
1 parent
cefb76c1ad
commit
683a47c055
29 files changed
+1289
-755
No files matched your search
+52
-23
@@ -1,6 +1,6 @@
|
||||
# ESP32: controller
|
||||
|
||||
PlatformIO environments: `esp32` (OTA) and `esp32_usb` (USB)
|
||||
PlatformIO environments: `esp32` (OTA) and `esp32_usb` (USB). Tests: `test_esp32`.
|
||||
|
||||
The ESP32 decides what is shown on the display. It never touches the panel itself. The
|
||||
BROSE9323 driver is built with `-D ESPSERIAL`, so every GFX call is sent to the Nano over
|
||||
@@ -11,35 +11,55 @@ debug output. Wiring is described in the [main README](../../README.md#wiring-be
|
||||
|
||||
| File | Contents |
|
||||
|------|----------|
|
||||
| `main.cpp` | setup, OTA, clock / power logic, Home Assistant callbacks |
|
||||
| `libs.h` | includes and global objects (display, MQTT, WiFi, pins, timezone) |
|
||||
| `bitmaps.h` | 1-bit bitmaps (Pikachu, thought bubble, Nintendo logo, ...) |
|
||||
| `nano_flash_bridge.h/.cpp` | WiFi to serial bridge for flashing the Nano over WiFi (TCP port 2323) |
|
||||
| `secrets.example.h` | template for `secrets.h` (WiFi and MQTT credentials, **gitignored**) |
|
||||
| `main.cpp` | Creates the objects, `setup()` and `loop()` |
|
||||
| `config.h` | All settings: pins, timings, timezone, Home Assistant device id |
|
||||
| `credentials.h` | Includes `secrets.h` (WiFi and MQTT credentials, **gitignored**); template: `secrets.example.h` |
|
||||
| **`logic/`** | **Pure logic without Arduino code, tested on the PC** |
|
||||
| `logic/display_controller.*` | Decides what is shown and when the display is powered (`DisplayController`) |
|
||||
| `logic/schedule.*` | When the clock is shown (night, clock, standby) |
|
||||
| `logic/power_timer.*` | Countdown to switching the display off |
|
||||
| `logic/status_led.h` | Blink pattern of the built-in LED |
|
||||
| **`display/`** | **What is drawn** |
|
||||
| `display/frames.*` | The screens: clock, logo, blank, text (`FlipdotFrames`) |
|
||||
| `display/bitmaps.h` | 1-bit bitmaps (Pikachu, thought bubble, Nintendo logo, ...) |
|
||||
| **`nano_link/`** | **Connection to the Nano** |
|
||||
| `nano_link/nano_link.*` | Relay and serial link: power on (waits for `READY`), power off, bootloader start (`NanoLink`) |
|
||||
| `nano_link/nano_flash_bridge.*` | WiFi to serial bridge for flashing the Nano over WiFi (TCP port 2323) |
|
||||
| **`net/`** | **Network** |
|
||||
| `net/wifi_ota.*` | WiFi, ESP32 OTA updates and the OTA panic window |
|
||||
| `net/home_assistant.*` | MQTT and the two Home Assistant switches |
|
||||
|
||||
`DisplayController` only talks to two small interfaces, `DisplayPower` (implemented by
|
||||
`NanoLink`) and `Frames` (implemented by `FlipdotFrames`). The tests replace both with
|
||||
fakes.
|
||||
|
||||
## Features
|
||||
|
||||
- **Frames only when something changes:** a new frame is sent when the minute changes, the
|
||||
screen changes (clock, logo, blank) or the Nano was just powered on. The serial line is
|
||||
quiet in between, which also gives the Nano time for its periodic full redraw.
|
||||
- **OTA updates** through ArduinoOTA. Hostname: `FlipDotDisplay`.
|
||||
- **OTA panic window:** after a crash or watchdog reset, the ESP32 runs only the OTA
|
||||
handler for 15 seconds before it starts the main code. A firmware that crashes on boot
|
||||
can still be replaced over the air.
|
||||
- **NTP time** with timezone `CET-1CEST,M3.5.0,M10.5.0/3` (Europe/Amsterdam).
|
||||
- **Home Assistant** through MQTT (`home-assistant-integration` library) with two switches:
|
||||
- `FlipDotDisplayClock`: clock on, or the Nintendo logo when off
|
||||
- `FlipDotDisplayPower`: turns the display off through the relay
|
||||
handler for 15 seconds before it starts the main code, with the LED blinking fast. A
|
||||
firmware that crashes on boot can still be replaced over the air.
|
||||
- **NTP time** with timezone `CET-1CEST,M3.5.0,M10.5.0/3` (Europe/Amsterdam). Until the
|
||||
time is synced, the display shows "Connecting...".
|
||||
- **Home Assistant** through MQTT (`home-assistant-integration` library) with two switches.
|
||||
Each switch reports its new state back, so Home Assistant always shows the real state.
|
||||
- `FlipDot Display Clock`: on = clock; off = Nintendo logo while the display is on,
|
||||
then power off after 30 s
|
||||
- `FlipDot Display Power`: off = clear the display and power it off after 1 s
|
||||
- **Relay on GPIO 13** switches the power for both the panels and the Nano. `LOW` turns it
|
||||
on.
|
||||
- **On:** the ESP waits for the Nano's `READY` message, at most 3 s
|
||||
(`NANO_BOOT_TIMEOUT`), before it sends frames. The relay stays on while it is needed;
|
||||
the ESP only waits when it actually switches the relay on.
|
||||
- **Off:** the ESP stops sending and releases its TX pin (`Serial.end()` and the pin set
|
||||
to input). An idle UART line is high and would otherwise power the Nano through its RX
|
||||
pin.
|
||||
(`NANO_BOOT_TIMEOUT`), before it sends frames.
|
||||
- **Off:** the ESP releases its TX pin (`Serial2.end()` and the pin set to input). An
|
||||
idle UART line is high and would otherwise power the Nano through its RX pin.
|
||||
- **Nano flash bridge:** `pio run -e nano_ota -t upload` flashes the Nano through the ESP32.
|
||||
While a flash session runs, the clock is paused. See the
|
||||
[main README](../../README.md#flashing-the-nano-over-wifi).
|
||||
- **Status LED** (built-in) blinks fast when WiFi is down and slowly when connected. It is
|
||||
off at night or when the display is powered off.
|
||||
- **Status LED** (built-in): off while the display is off, slow blink with WiFi, fast blink
|
||||
without WiFi.
|
||||
|
||||
## Schedule
|
||||
|
||||
@@ -47,11 +67,20 @@ debug output. Wiring is described in the [main README](../../README.md#wiring-be
|
||||
|------|---------|
|
||||
| 08:00 – 17:00 | Pikachu and the clock, updated every minute |
|
||||
| 17:00 – 22:00 | Yawning Pikachu and the clock |
|
||||
| 22:00 – 23:30 | Clock shown only during the minutes :00, :15, :30 and :45; power is off in between |
|
||||
| 23:31 – 08:00 | Screen cleared, power off |
|
||||
| 22:00 – 23:30 | Clock shown only during the minutes :00, :15, :30 and :45. In between the power is off, and the last time stays visible (flipdots keep their image without power). |
|
||||
| 23:31 – 08:00 | Screen cleared, power off after 30 s |
|
||||
|
||||
The times are in `logic/schedule.cpp`.
|
||||
|
||||
## Tests
|
||||
|
||||
`pio test -e test_esp32` runs [test/test_esp32](../../test/test_esp32/test_main.cpp) on
|
||||
the PC: the schedule boundaries, the power timer (including `millis()` overflow), the LED
|
||||
pattern and the display controller (power on/off, redraws, both Home Assistant switches).
|
||||
|
||||
## Adding bitmaps
|
||||
|
||||
Convert an image with [image2cpp](https://javl.github.io/image2cpp/) to "Arduino code",
|
||||
horizontal, 1 bit per pixel. Paste the array into `bitmaps.h` and draw it with
|
||||
`display.drawBitmap(x, y, bitmap, w, h, 1)`. The display is 84 × 19 pixels.
|
||||
horizontal, 1 bit per pixel. Paste the array into `display/bitmaps.h` and draw it in
|
||||
`display/frames.cpp` with `_display.drawBitmap(x, y, bitmap, w, h, 1)`. The display is
|
||||
84 × 19 pixels.
|
||||
@@ -0,0 +1,69 @@
|
||||
#pragma once
|
||||
|
||||
// All ESP32 settings. Credentials are in secrets.h (see secrets.example.h).
|
||||
// Kept free of Arduino types so the logic modules can be tested on the PC.
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
// Pins
|
||||
// ---------------------------------------------------------------------------
|
||||
|
||||
const int LED_PIN = 2; // built-in LED of the ESP32 DevKit v1
|
||||
const int RELAY_PIN = 13; // powers the panels and the Nano (LOW = on)
|
||||
|
||||
// Link to the Nano on UART2. Serial (UART0) stays free for USB / debug output.
|
||||
const int NANO_RX_PIN = 16; // wired to the Nano TX (through a 5V -> 3.3V divider)
|
||||
const int NANO_TX_PIN = 17; // wired to the Nano RX
|
||||
|
||||
// Optional: GPIO that resets the Nano through an NPN transistor (HIGH = reset), -1 = not wired.
|
||||
// Needed to flash a Nano with the Optiboot bootloader, which doesn't start after a power cycle.
|
||||
const int NANO_RESET_PIN = -1;
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
// Display and Nano
|
||||
// ---------------------------------------------------------------------------
|
||||
|
||||
const uint8_t DISPLAY_WIDTH = 84;
|
||||
const uint8_t DISPLAY_HEIGHT = 19;
|
||||
const uint8_t PANEL_WIDTH = 28;
|
||||
|
||||
const uint16_t FLIP_TIME = 225; // flip pulse length in us, sent to the Nano at boot
|
||||
|
||||
const uint32_t NANO_BAUD = 115200;
|
||||
// Max wait for the Nano's READY after power on (also the wait when Nano TX is not wired to our RX)
|
||||
const uint32_t NANO_BOOT_TIMEOUT = 3000;
|
||||
|
||||
// After a frame is cleared, wait this long before cutting the power, so the dots can flip
|
||||
const uint32_t CLEAR_BEFORE_OFF_TIME = 1000;
|
||||
// Power off this long after the display is no longer needed (night, standby, logo)
|
||||
const uint32_t POWER_OFF_DELAY = 30000;
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
// Flashing the Nano over WiFi (see README.md, pio run -e nano_ota -t upload)
|
||||
// ---------------------------------------------------------------------------
|
||||
|
||||
const uint16_t NANO_FLASH_PORT = 2323;
|
||||
// The bootloader baud rate is chosen by the uploader (57600 old bootloader, 115200 Optiboot)
|
||||
const uint32_t NANO_POWER_OFF_TIME = 1000; // relay off time to make sure the Nano resets
|
||||
const uint32_t NANO_RESET_DELAY = 200; // after power on, before the reset pulse
|
||||
const uint32_t NANO_RESET_PULSE = 50;
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
// Network, time and Home Assistant
|
||||
// ---------------------------------------------------------------------------
|
||||
|
||||
#define HOSTNAME "FlipDotDisplay"
|
||||
|
||||
// Europe/Amsterdam
|
||||
#define TIMEZONE "CET-1CEST,M3.5.0,M10.5.0/3"
|
||||
#define NTP_SERVER "pool.ntp.org"
|
||||
|
||||
// After a crash or unexpected reset, only run OTA for this long before starting the
|
||||
// main code, so a firmware that crashes at boot can still be replaced
|
||||
const uint32_t OTA_PANIC_WINDOW = 15000;
|
||||
|
||||
// Home Assistant device id (do not change: Home Assistant's entities are linked to it)
|
||||
const uint8_t HA_DEVICE_ID[] = {0x34, 0x86, 0x5d, 0x3a, 0x08, 0x28};
|
||||
#define HA_DEVICE_NAME "FlipDotDisplay"
|
||||
#define HA_SOFTWARE_VERSION "2.0.0"
|
||||
@@ -0,0 +1,8 @@
|
||||
#pragma once
|
||||
|
||||
// WiFi / MQTT credentials from secrets.h, which is gitignored
|
||||
#if __has_include("secrets.h")
|
||||
#include "secrets.h"
|
||||
#else
|
||||
#error "Missing src/esp32/secrets.h - copy src/esp32/secrets.example.h to secrets.h and fill it in"
|
||||
#endif
|
||||
File renamed without changes.
@@ -0,0 +1,55 @@
|
||||
#include "display/frames.h"
|
||||
|
||||
#include <stdio.h>
|
||||
|
||||
#include "display/bitmaps.h"
|
||||
#include "logic/schedule.h"
|
||||
|
||||
// Horizontal offset that centers the 81 pixel wide clock on the 84 pixel display
|
||||
static const int CLOCK_X = 3;
|
||||
|
||||
FlipdotFrames::FlipdotFrames(BROSE9323 &display) : _display(display)
|
||||
{
|
||||
}
|
||||
|
||||
void FlipdotFrames::clock(int hour, int minute)
|
||||
{
|
||||
char time[6];
|
||||
snprintf(time, sizeof(time), "%02d:%02d", hour, minute);
|
||||
|
||||
_display.fillScreen(0);
|
||||
if (isEvening(hour))
|
||||
_display.drawBitmap(CLOCK_X, 0, yawning_pikachu_bitmap_yawning_pikachu_black_border, 35, 19, 1);
|
||||
else
|
||||
_display.drawBitmap(CLOCK_X, 0, pikachu_bitmap_pikachu_black_border, 35, 19, 1);
|
||||
_display.drawBitmap(CLOCK_X + 35, 0, clock_thought_bubble_bitmap_clock_thought_bubble, 46, 19, 1);
|
||||
|
||||
_display.setTextSize(1);
|
||||
_display.setTextWrap(false);
|
||||
_display.setCursor(CLOCK_X + 43, 4);
|
||||
_display.print(time);
|
||||
_display.display();
|
||||
}
|
||||
|
||||
void FlipdotFrames::logo()
|
||||
{
|
||||
_display.fillScreen(0);
|
||||
_display.drawBitmap(0, 0, nintendo_bitmap_Nintendo_new, 84, 19, 1);
|
||||
_display.display();
|
||||
}
|
||||
|
||||
void FlipdotFrames::blank()
|
||||
{
|
||||
_display.fillScreen(0);
|
||||
_display.display();
|
||||
}
|
||||
|
||||
void FlipdotFrames::message(const char *text)
|
||||
{
|
||||
_display.fillScreen(0);
|
||||
_display.setTextSize(1);
|
||||
_display.setTextWrap(true);
|
||||
_display.setCursor(0, 0);
|
||||
_display.print(text);
|
||||
_display.display();
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
#pragma once
|
||||
|
||||
#include "BROSE9323.h"
|
||||
#include "logic/display_controller.h"
|
||||
|
||||
// Draws the screens on the flipdot display. Each method sends one complete frame.
|
||||
class FlipdotFrames : public Frames
|
||||
{
|
||||
public:
|
||||
explicit FlipdotFrames(BROSE9323 &display);
|
||||
|
||||
// Pikachu with a thought bubble showing HH:MM (yawning in the evening)
|
||||
void clock(int hour, int minute) override;
|
||||
// Nintendo logo
|
||||
void logo() override;
|
||||
void blank() override;
|
||||
// A line of text, e.g. while connecting
|
||||
void message(const char *text);
|
||||
|
||||
private:
|
||||
BROSE9323 &_display;
|
||||
};
|
||||
@@ -1,90 +0,0 @@
|
||||
#include <Arduino.h>
|
||||
#include "BROSE9323.h"
|
||||
#include "bitmaps.h"
|
||||
#include "nano_flash_bridge.h"
|
||||
|
||||
// WiFi / MQTT credentials (gitignored, copy secrets.example.h -> secrets.h)
|
||||
#if __has_include("secrets.h")
|
||||
#include "secrets.h"
|
||||
#else
|
||||
#error "Missing src/esp32/secrets.h - copy src/esp32/secrets.example.h to secrets.h and fill it in"
|
||||
#endif
|
||||
|
||||
// fixes
|
||||
#include <SPI.h>
|
||||
#include <Adafruit_I2CDevice.h>
|
||||
// fonts
|
||||
#include <Fonts/FreeSerif12pt7b.h>
|
||||
#include <Fonts/FreeSerifItalic12pt7b.h>
|
||||
// #include <Font2x5FixedMonoNum.h>
|
||||
|
||||
#include <WiFi.h>
|
||||
#include <ESPmDNS.h>
|
||||
#include <WiFiUdp.h>
|
||||
#include <ArduinoOTA.h>
|
||||
#include <WiFiMulti.h>
|
||||
|
||||
// wdt?
|
||||
#include <esp_task_wdt.h>
|
||||
#include <rom/rtc.h>
|
||||
|
||||
// hassio
|
||||
#include <ArduinoHA.h>
|
||||
|
||||
byte mac[] = {0x34, 0x86, 0x5d, 0x3a, 0x08, 0x28};
|
||||
|
||||
// EthernetClient client;
|
||||
WiFiClient client;
|
||||
HADevice device(mac, sizeof(mac));
|
||||
HAMqtt mqtt(client, device);
|
||||
|
||||
HASwitch flipDotDisplay("FlipDotDisplayClock");
|
||||
bool hassioDisplayStatus = true;
|
||||
|
||||
HASwitch powerSwitch("FlipDotDisplayPower");
|
||||
bool power = true;
|
||||
|
||||
const int led1 = BUILTIN_LED; // Pin of the LED
|
||||
const int relay = 13; // Pin of the relay, powers the panels and the Nano (LOW = on)
|
||||
// Link to the Nano on UART2. Serial (UART0) stays free for USB / debug output.
|
||||
HardwareSerial &nanoSerial = Serial2;
|
||||
const int nano_rx = 16; // UART2 RX, wired to the Nano TX (through a 5V -> 3.3V divider)
|
||||
const int nano_tx = 17; // UART2 TX, wired to the Nano RX
|
||||
// Optional: GPIO that resets the Nano through an NPN transistor (HIGH = reset), -1 = not wired.
|
||||
// Needed to flash a Nano with the Optiboot bootloader, which doesn't start after a power cycle.
|
||||
const int nano_reset = -1;
|
||||
bool relay_on = false;
|
||||
// Max wait for the Nano's READY after power on (also the wait when Nano TX is not wired to our RX)
|
||||
const uint32_t NANO_BOOT_TIMEOUT = 3000;
|
||||
const uint32_t NANO_BAUD = 115200;
|
||||
|
||||
// Flashing the Nano over WiFi (see README.md, pio run -e nano_ota -t upload)
|
||||
const uint16_t NANO_FLASH_PORT = 2323;
|
||||
// The bootloader baud rate is chosen by the uploader (57600 old bootloader, 115200 Optiboot)
|
||||
const uint32_t NANO_POWER_OFF_TIME = 1000; // relay off time to make sure the Nano resets
|
||||
const uint32_t NANO_RESET_DELAY = 200; // after power on, before the reset pulse
|
||||
const uint32_t NANO_RESET_PULSE = 50;
|
||||
|
||||
int hour = 0;
|
||||
int minute = 0;
|
||||
int second = 0;
|
||||
|
||||
//
|
||||
WiFiMulti wifiMulti;
|
||||
|
||||
const char *ssid = WIFI_SSID;
|
||||
const char *password = WIFI_PASSWORD;
|
||||
|
||||
BROSE9323 display(84, 19, 28);
|
||||
|
||||
uint32_t next_display;
|
||||
|
||||
// ntp
|
||||
#define MYTZ "CET-1CEST,M3.5.0,M10.5.0/3"
|
||||
const char *ntpServer = "pool.ntp.org";
|
||||
const long gmtOffset_sec = 3600;
|
||||
const int daylightOffset_sec = 3600;
|
||||
// const int daylightOffset_sec = 0;
|
||||
|
||||
bool wifiStatus = false;
|
||||
bool otaPanicMode = true;
|
||||
@@ -0,0 +1,118 @@
|
||||
#include "logic/display_controller.h"
|
||||
|
||||
#include "config.h"
|
||||
#include "logic/schedule.h"
|
||||
|
||||
DisplayController::DisplayController(DisplayPower &power, Frames &frames) : _power(power), _frames(frames)
|
||||
{
|
||||
}
|
||||
|
||||
void DisplayController::setClockEnabled(bool enabled)
|
||||
{
|
||||
_clock_enabled = enabled;
|
||||
}
|
||||
|
||||
void DisplayController::setPowerEnabled(bool enabled)
|
||||
{
|
||||
_power_enabled = enabled;
|
||||
}
|
||||
|
||||
bool DisplayController::clockEnabled() const
|
||||
{
|
||||
return _clock_enabled;
|
||||
}
|
||||
|
||||
bool DisplayController::powerEnabled() const
|
||||
{
|
||||
return _power_enabled;
|
||||
}
|
||||
|
||||
void DisplayController::update(uint32_t now, bool time_valid, int hour, int minute)
|
||||
{
|
||||
// Switched off elsewhere (power timer, Nano flashing): the Nano lost its frame
|
||||
if (!_power.isOn())
|
||||
_screen = Screen::Unknown;
|
||||
|
||||
if (_off_timer.expired(now))
|
||||
{
|
||||
_power.off();
|
||||
_screen = Screen::Unknown;
|
||||
return;
|
||||
}
|
||||
|
||||
if (!_power_enabled)
|
||||
{
|
||||
if (_power.isOn())
|
||||
{
|
||||
_showBlank();
|
||||
_off_timer.request(now, CLEAR_BEFORE_OFF_TIME);
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
// Keep the boot screen until the time is known
|
||||
if (!time_valid)
|
||||
return;
|
||||
|
||||
if (!_clock_enabled)
|
||||
{
|
||||
// The logo is only shown while the display is on; it never switches the power on
|
||||
if (_power.isOn())
|
||||
{
|
||||
_showLogo();
|
||||
_off_timer.request(now, POWER_OFF_DELAY);
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
switch (scheduleFor(hour, minute))
|
||||
{
|
||||
case ScheduleMode::Night:
|
||||
if (_power.isOn())
|
||||
{
|
||||
_showBlank();
|
||||
_off_timer.request(now, POWER_OFF_DELAY);
|
||||
}
|
||||
break;
|
||||
case ScheduleMode::Clock:
|
||||
_off_timer.cancel();
|
||||
if (!_power.isOn())
|
||||
{
|
||||
_power.on();
|
||||
_screen = Screen::Unknown;
|
||||
}
|
||||
_showClock(hour, minute);
|
||||
break;
|
||||
case ScheduleMode::Standby:
|
||||
// Flipdots keep their image without power, so the last time stays visible
|
||||
if (_power.isOn())
|
||||
_off_timer.request(now, POWER_OFF_DELAY);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void DisplayController::_showClock(int hour, int minute)
|
||||
{
|
||||
if (_screen == Screen::Clock && _shown_hour == hour && _shown_minute == minute)
|
||||
return;
|
||||
_frames.clock(hour, minute);
|
||||
_screen = Screen::Clock;
|
||||
_shown_hour = hour;
|
||||
_shown_minute = minute;
|
||||
}
|
||||
|
||||
void DisplayController::_showLogo()
|
||||
{
|
||||
if (_screen == Screen::Logo)
|
||||
return;
|
||||
_frames.logo();
|
||||
_screen = Screen::Logo;
|
||||
}
|
||||
|
||||
void DisplayController::_showBlank()
|
||||
{
|
||||
if (_screen == Screen::Blank)
|
||||
return;
|
||||
_frames.blank();
|
||||
_screen = Screen::Blank;
|
||||
}
|
||||
@@ -0,0 +1,68 @@
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include "logic/power_timer.h"
|
||||
|
||||
// Power for the panels and the Nano (implemented by NanoLink)
|
||||
class DisplayPower
|
||||
{
|
||||
public:
|
||||
virtual bool isOn() = 0;
|
||||
// Switch on and wait until the Nano is ready
|
||||
virtual void on() = 0;
|
||||
virtual void off() = 0;
|
||||
};
|
||||
|
||||
// The screens the display can show (implemented by FlipdotFrames)
|
||||
class Frames
|
||||
{
|
||||
public:
|
||||
virtual void clock(int hour, int minute) = 0;
|
||||
virtual void logo() = 0;
|
||||
virtual void blank() = 0;
|
||||
};
|
||||
|
||||
// Decides what the display shows and when it is powered, based on the time and the two
|
||||
// Home Assistant switches. A frame is only sent when it changes. Pure logic, tested in
|
||||
// test/test_esp32.
|
||||
class DisplayController
|
||||
{
|
||||
public:
|
||||
DisplayController(DisplayPower &power, Frames &frames);
|
||||
|
||||
// Home Assistant "FlipDot Display Clock" switch: off shows the logo instead of the clock
|
||||
void setClockEnabled(bool enabled);
|
||||
// Home Assistant "FlipDot Display Power" switch: off clears the display and powers it off
|
||||
void setPowerEnabled(bool enabled);
|
||||
|
||||
bool clockEnabled() const;
|
||||
bool powerEnabled() const;
|
||||
|
||||
// Call often (every loop). time_valid is false until the time is synced over NTP.
|
||||
void update(uint32_t now, bool time_valid, int hour, int minute);
|
||||
|
||||
private:
|
||||
enum class Screen
|
||||
{
|
||||
Unknown, // nothing sent since the last power on
|
||||
Clock,
|
||||
Logo,
|
||||
Blank,
|
||||
};
|
||||
|
||||
DisplayPower &_power;
|
||||
Frames &_frames;
|
||||
PowerTimer _off_timer;
|
||||
|
||||
bool _clock_enabled = true;
|
||||
bool _power_enabled = true;
|
||||
|
||||
Screen _screen = Screen::Unknown;
|
||||
int _shown_hour = -1;
|
||||
int _shown_minute = -1;
|
||||
|
||||
void _showClock(int hour, int minute);
|
||||
void _showLogo();
|
||||
void _showBlank();
|
||||
};
|
||||
@@ -0,0 +1,33 @@
|
||||
#include "logic/power_timer.h"
|
||||
|
||||
// a is before b, also when millis() overflowed in between
|
||||
static bool before(uint32_t a, uint32_t b)
|
||||
{
|
||||
return (int32_t)(a - b) < 0;
|
||||
}
|
||||
|
||||
void PowerTimer::request(uint32_t now, uint32_t delay)
|
||||
{
|
||||
uint32_t deadline = now + delay;
|
||||
if (!_pending || before(deadline, _deadline))
|
||||
_deadline = deadline;
|
||||
_pending = true;
|
||||
}
|
||||
|
||||
void PowerTimer::cancel()
|
||||
{
|
||||
_pending = false;
|
||||
}
|
||||
|
||||
bool PowerTimer::pending() const
|
||||
{
|
||||
return _pending;
|
||||
}
|
||||
|
||||
bool PowerTimer::expired(uint32_t now)
|
||||
{
|
||||
if (!_pending || before(now, _deadline))
|
||||
return false;
|
||||
_pending = false;
|
||||
return true;
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
// Countdown to switching the display off. Works across millis() overflow.
|
||||
class PowerTimer
|
||||
{
|
||||
public:
|
||||
// Switch off `delay` ms from `now`. An earlier pending deadline is kept.
|
||||
void request(uint32_t now, uint32_t delay);
|
||||
|
||||
void cancel();
|
||||
|
||||
bool pending() const;
|
||||
|
||||
// True once when the deadline has passed (the timer is then cleared)
|
||||
bool expired(uint32_t now);
|
||||
|
||||
private:
|
||||
bool _pending = false;
|
||||
uint32_t _deadline = 0;
|
||||
};
|
||||
@@ -0,0 +1,21 @@
|
||||
#include "logic/schedule.h"
|
||||
|
||||
static const int DAY_START_HOUR = 8;
|
||||
static const int LATE_START_HOUR = 22;
|
||||
static const int NIGHT_START_HOUR = 23;
|
||||
static const int NIGHT_START_MINUTE = 31;
|
||||
static const int EVENING_START_HOUR = 17;
|
||||
|
||||
ScheduleMode scheduleFor(int hour, int minute)
|
||||
{
|
||||
if (hour < DAY_START_HOUR || (hour >= NIGHT_START_HOUR && minute >= NIGHT_START_MINUTE))
|
||||
return ScheduleMode::Night;
|
||||
if (hour < LATE_START_HOUR || minute % 15 == 0)
|
||||
return ScheduleMode::Clock;
|
||||
return ScheduleMode::Standby;
|
||||
}
|
||||
|
||||
bool isEvening(int hour)
|
||||
{
|
||||
return hour >= EVENING_START_HOUR;
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
#pragma once
|
||||
|
||||
// When the clock is shown. Pure logic, tested in test/test_esp32.
|
||||
//
|
||||
// 00:00 - 07:59 Night screen cleared, power off
|
||||
// 08:00 - 21:59 Clock clock updated every minute
|
||||
// 22:00 - 23:30 Clock only during the minutes :00, :15, :30 and :45
|
||||
// Standby in between: power off, the last time stays on the dots
|
||||
// 23:31 - 23:59 Night
|
||||
|
||||
enum class ScheduleMode
|
||||
{
|
||||
Night,
|
||||
Clock,
|
||||
Standby,
|
||||
};
|
||||
|
||||
ScheduleMode scheduleFor(int hour, int minute);
|
||||
|
||||
// Evening: the yawning Pikachu is shown
|
||||
bool isEvening(int hour);
|
||||
@@ -0,0 +1,13 @@
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
// Built-in LED: off while the display is off, slow blink (1 s) when connected to WiFi,
|
||||
// fast blink (200 ms) without WiFi. Pure logic, tested in test/test_esp32.
|
||||
inline bool statusLedLevel(uint32_t now, bool wifi_connected, bool display_on)
|
||||
{
|
||||
if (!display_on)
|
||||
return false;
|
||||
uint32_t period = wifi_connected ? 1000 : 200;
|
||||
return now % period < period / 2;
|
||||
}
|
||||
+47
-604
@@ -1,621 +1,64 @@
|
||||
#include "libs.h"
|
||||
// ESP32 firmware: decides what the flipdot display shows (clock, Home Assistant switches)
|
||||
// and sends it to the Nano, which drives the panels. See README.md.
|
||||
|
||||
void toggleLED(void *parameter);
|
||||
#include <Arduino.h>
|
||||
#include <time.h>
|
||||
|
||||
uint32_t power_off_delay;
|
||||
int triggered_power_off = false;
|
||||
int turn_hassio_power_off = false;
|
||||
#include "BROSE9323.h"
|
||||
#include "config.h"
|
||||
#include "display/frames.h"
|
||||
#include "logic/display_controller.h"
|
||||
#include "logic/status_led.h"
|
||||
#include "nano_link/nano_flash_bridge.h"
|
||||
#include "nano_link/nano_link.h"
|
||||
#include "net/home_assistant.h"
|
||||
#include "net/wifi_ota.h"
|
||||
|
||||
// Wait until the Nano reports READY after booting, or until NANO_BOOT_TIMEOUT
|
||||
void waitForNano()
|
||||
{
|
||||
char line[16];
|
||||
uint8_t len = 0;
|
||||
uint32_t start = millis();
|
||||
while (millis() - start < NANO_BOOT_TIMEOUT)
|
||||
{
|
||||
while (nanoSerial.available())
|
||||
{
|
||||
char c = nanoSerial.read();
|
||||
if (c == '\n')
|
||||
{
|
||||
line[len] = '\0';
|
||||
if (strstr(line, "READY"))
|
||||
return;
|
||||
len = 0;
|
||||
}
|
||||
else if (len < sizeof(line) - 1)
|
||||
line[len++] = c;
|
||||
}
|
||||
delay(10);
|
||||
}
|
||||
}
|
||||
NanoLink nano(Serial2, NANO_RX_PIN, NANO_TX_PIN, RELAY_PIN, NANO_RESET_PIN);
|
||||
BROSE9323 display(DISPLAY_WIDTH, DISPLAY_HEIGHT, PANEL_WIDTH);
|
||||
FlipdotFrames frames(display);
|
||||
DisplayController controller(nano, frames);
|
||||
|
||||
void relayOn()
|
||||
{
|
||||
// cancel a pending power off countdown
|
||||
triggered_power_off = false;
|
||||
|
||||
if (relay_on)
|
||||
return;
|
||||
|
||||
nanoSerial.begin(NANO_BAUD, SERIAL_8N1, nano_rx, nano_tx);
|
||||
// drop old data (e.g. ERR replies) so only a new READY counts
|
||||
while (nanoSerial.available())
|
||||
nanoSerial.read();
|
||||
|
||||
digitalWrite(relay, LOW);
|
||||
waitForNano();
|
||||
relay_on = true;
|
||||
}
|
||||
|
||||
void relayOff()
|
||||
{
|
||||
digitalWrite(relay, HIGH);
|
||||
relay_on = false;
|
||||
|
||||
// An idle UART TX line is high and would power the Nano through its RX pin
|
||||
nanoSerial.flush();
|
||||
nanoSerial.end();
|
||||
pinMode(nano_tx, INPUT);
|
||||
}
|
||||
|
||||
// Flash session started: restart the Nano so its bootloader runs, and talk to the
|
||||
// bootloader at its baud rate. The PC uploader keeps sending sync bytes until it answers.
|
||||
// The old bootloader also starts after a power cycle; Optiboot only after a reset pulse.
|
||||
void startNanoFlash(uint32_t baud)
|
||||
{
|
||||
if (relay_on)
|
||||
relayOff();
|
||||
delay(NANO_POWER_OFF_TIME);
|
||||
|
||||
nanoSerial.begin(baud, SERIAL_8N1, nano_rx, nano_tx);
|
||||
digitalWrite(relay, LOW);
|
||||
|
||||
if (nano_reset >= 0)
|
||||
{
|
||||
delay(NANO_RESET_DELAY);
|
||||
digitalWrite(nano_reset, HIGH);
|
||||
delay(NANO_RESET_PULSE);
|
||||
digitalWrite(nano_reset, LOW);
|
||||
}
|
||||
|
||||
// drop anything the Nano sent before its bootloader started
|
||||
while (nanoSerial.available())
|
||||
nanoSerial.read();
|
||||
}
|
||||
|
||||
// Flash session ended: switch off, the clock powers the Nano on again with the new firmware
|
||||
void endNanoFlash()
|
||||
{
|
||||
relayOff();
|
||||
// skip the frames that were missed while flashing
|
||||
next_display = millis();
|
||||
}
|
||||
|
||||
NanoFlashBridge nanoFlashBridge(NANO_FLASH_PORT, nanoSerial, startNanoFlash, endNanoFlash);
|
||||
void turnPowerOff(uint32_t delay = 30000, bool _turn_hassio_power_off = false)
|
||||
{
|
||||
if(triggered_power_off == false)
|
||||
{
|
||||
// start new countdown
|
||||
turn_hassio_power_off = _turn_hassio_power_off;
|
||||
power_off_delay = millis() + delay;
|
||||
|
||||
triggered_power_off = true;
|
||||
}
|
||||
}
|
||||
|
||||
void updatePower()
|
||||
{
|
||||
if(millis() > power_off_delay && triggered_power_off == true)
|
||||
{
|
||||
// finished countdown
|
||||
triggered_power_off = false;
|
||||
|
||||
// OFF
|
||||
relayOff();
|
||||
|
||||
if(turn_hassio_power_off)
|
||||
{
|
||||
power = false;
|
||||
powerSwitch.setState(false);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void onSwitchStateChanged(bool state, HASwitch *s)
|
||||
{
|
||||
hassioDisplayStatus = (state ? HIGH : LOW);
|
||||
}
|
||||
|
||||
void onPowerSwitchStateChanged(bool state, HASwitch *s)
|
||||
{
|
||||
power = (state ? HIGH : LOW);
|
||||
|
||||
if(power == false)
|
||||
{
|
||||
if (relay_on)
|
||||
{
|
||||
display.fillScreen(0);
|
||||
display.display();
|
||||
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
turnPowerOff(0);
|
||||
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
void print_reset_reason(RESET_REASON reason)
|
||||
{
|
||||
switch (reason)
|
||||
{
|
||||
case POWERON_RESET:
|
||||
Serial.println("POWERON_RESET");
|
||||
break; /**<1, Vbat power on reset*/
|
||||
case 3:
|
||||
Serial.println("SW_RESET");
|
||||
break; /**<3, Software reset digital core*/
|
||||
case 4:
|
||||
Serial.println("OWDT_RESET");
|
||||
break; /**<4, Legacy watch dog reset digital core*/
|
||||
case 5:
|
||||
Serial.println("DEEPSLEEP_RESET");
|
||||
break; /**<5, Deep Sleep reset digital core*/
|
||||
case 6:
|
||||
Serial.println("SDIO_RESET");
|
||||
break; /**<6, Reset by SLC module, reset digital core*/
|
||||
case 7:
|
||||
Serial.println("TG0WDT_SYS_RESET");
|
||||
break; /**<7, Timer Group0 Watch dog reset digital core*/
|
||||
case 8:
|
||||
Serial.println("TG1WDT_SYS_RESET");
|
||||
break; /**<8, Timer Group1 Watch dog reset digital core*/
|
||||
case 9:
|
||||
Serial.println("RTCWDT_SYS_RESET");
|
||||
break; /**<9, RTC Watch dog Reset digital core*/
|
||||
case 10:
|
||||
Serial.println("INTRUSION_RESET");
|
||||
break; /**<10, Instrusion tested to reset CPU*/
|
||||
case 11:
|
||||
Serial.println("TGWDT_CPU_RESET");
|
||||
break; /**<11, Time Group reset CPU*/
|
||||
case SW_CPU_RESET:
|
||||
Serial.println("SW_CPU_RESET");
|
||||
break; /**<12, Software reset CPU*/
|
||||
case 13:
|
||||
Serial.println("RTCWDT_CPU_RESET");
|
||||
break; /**<13, RTC Watch dog Reset CPU*/
|
||||
case EXT_CPU_RESET:
|
||||
Serial.println("EXT_CPU_RESET");
|
||||
break; /**<14, for APP CPU, reseted by PRO CPU*/
|
||||
case 15:
|
||||
Serial.println("RTCWDT_BROWN_OUT_RESET");
|
||||
break; /**<15, Reset when the vdd voltage is not stable*/
|
||||
case 16:
|
||||
Serial.println("RTCWDT_RTC_RESET");
|
||||
break; /**<16, RTC Watch dog reset digital core and rtc module*/
|
||||
default:
|
||||
Serial.println("NO_MEAN");
|
||||
}
|
||||
}
|
||||
|
||||
bool checkResetStatus()
|
||||
{
|
||||
Serial.println("CPU0 reset reason: ");
|
||||
RESET_REASON reason0 = rtc_get_reset_reason(0);
|
||||
print_reset_reason(reason0);
|
||||
|
||||
// if(reason0 == SW_CPU_RESET)
|
||||
// return true;
|
||||
|
||||
Serial.println("CPU1 reset reason: ");
|
||||
RESET_REASON reason1 = rtc_get_reset_reason(1);
|
||||
print_reset_reason(reason1);
|
||||
|
||||
// if(reason1 == SW_CPU_RESET)
|
||||
// return true;
|
||||
|
||||
if (reason0 != POWERON_RESET && reason1 != EXT_CPU_RESET)
|
||||
return true;
|
||||
|
||||
return false;
|
||||
}
|
||||
// Flashing the Nano over WiFi: restart it into its bootloader, switch it off afterwards.
|
||||
// The controller then powers it on again with the new firmware.
|
||||
NanoFlashBridge flashBridge(
|
||||
NANO_FLASH_PORT, Serial2,
|
||||
[](uint32_t baud) { nano.startBootloader(baud); },
|
||||
[]() { nano.off(); });
|
||||
|
||||
void setup()
|
||||
{
|
||||
otaPanicMode = true;
|
||||
pinMode(led1, OUTPUT);
|
||||
Serial.begin(115200);
|
||||
pinMode(LED_PIN, OUTPUT);
|
||||
nano.begin();
|
||||
|
||||
Serial.begin(115200);
|
||||
wifiBegin();
|
||||
otaBegin();
|
||||
flashBridge.begin();
|
||||
otaPanicWindow(LED_PIN);
|
||||
|
||||
WiFi.setHostname("FlipDotDisplay");
|
||||
wifiMulti.addAP(ssid, password);
|
||||
nano.on();
|
||||
display.begin(&nano.stream());
|
||||
display.setTiming(FLIP_TIME);
|
||||
// Shown until the time is synced
|
||||
frames.message("Connecting...");
|
||||
|
||||
Serial.println("Booting");
|
||||
WiFi.mode(WIFI_STA);
|
||||
WiFi.begin(ssid, password);
|
||||
while (WiFi.waitForConnectResult() != WL_CONNECTED)
|
||||
{
|
||||
Serial.println("Connection Failed! Rebooting...");
|
||||
delay(5000);
|
||||
ESP.restart();
|
||||
}
|
||||
|
||||
ArduinoOTA
|
||||
.onStart([]()
|
||||
{
|
||||
String type;
|
||||
if (ArduinoOTA.getCommand() == U_FLASH)
|
||||
type = "sketch";
|
||||
else // U_SPIFFS
|
||||
type = "filesystem";
|
||||
|
||||
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
|
||||
// USE_SERIAL.write(0x0C); //CLEAR SCREEN CMD
|
||||
// Serial.println("Start updating " + type);
|
||||
|
||||
// if (!otaPanicMode)
|
||||
// {
|
||||
// display.begin(&Serial);
|
||||
// display.fillScreen(0);
|
||||
// display.setTextSize(1);
|
||||
// display.setCursor(0, 0);
|
||||
// display.print("ota starting!");
|
||||
// display.display();
|
||||
// }
|
||||
})
|
||||
.onEnd([]()
|
||||
{
|
||||
// USE_SERIAL.write(0x0C); //CLEAR SCREEN CMD
|
||||
// Serial.println("\nEnd");
|
||||
})
|
||||
.onProgress([](unsigned int progress, unsigned int total)
|
||||
{
|
||||
// USE_SERIAL.write(0x0C); //CLEAR SCREEN CMD
|
||||
// USE_SERIAL.printf("Progress: %u%%\r", (progress / (total / 100)));
|
||||
// if (!otaPanicMode)
|
||||
// {
|
||||
// display.begin(&Serial);
|
||||
// display.fillScreen(0);
|
||||
// display.setTextSize(1);
|
||||
// display.setCursor(0, 0);
|
||||
// display.printf("ota: %u%%\r", (progress / (total / 100)));
|
||||
// display.display();
|
||||
// }
|
||||
})
|
||||
.onError([](ota_error_t error)
|
||||
{
|
||||
// // USE_SERIAL.write(0x0C); //CLEAR SCREEN CMD
|
||||
// Serial.printf("Error[%u]: ", error);
|
||||
// if (error == OTA_AUTH_ERROR)
|
||||
// Serial.println("Auth Failed");
|
||||
// else if (error == OTA_BEGIN_ERROR)
|
||||
// Serial.println("Begin Failed");
|
||||
// else if (error == OTA_CONNECT_ERROR)
|
||||
// Serial.println("Connect Failed");
|
||||
// else if (error == OTA_RECEIVE_ERROR)
|
||||
// Serial.println("Receive Failed");
|
||||
// else if (error == OTA_END_ERROR)
|
||||
// Serial.println("End Failed");
|
||||
});
|
||||
|
||||
ArduinoOTA.begin();
|
||||
nanoFlashBridge.begin();
|
||||
|
||||
do
|
||||
{
|
||||
ArduinoOTA.handle();
|
||||
|
||||
digitalWrite(led1, HIGH);
|
||||
|
||||
vTaskDelay(50 / portTICK_PERIOD_MS);
|
||||
|
||||
// Turn the LED off
|
||||
digitalWrite(led1, LOW);
|
||||
|
||||
vTaskDelay(50 / portTICK_PERIOD_MS);
|
||||
|
||||
} while (checkResetStatus() && millis() < 1000 * 15);
|
||||
otaPanicMode = false;
|
||||
|
||||
pinMode(relay, OUTPUT);
|
||||
if (nano_reset >= 0)
|
||||
{
|
||||
digitalWrite(nano_reset, LOW);
|
||||
pinMode(nano_reset, OUTPUT);
|
||||
}
|
||||
relayOn();
|
||||
|
||||
display.begin(&nanoSerial);
|
||||
// display.setTiming(200);
|
||||
// display.setTiming(180);
|
||||
// display.setTiming(220); // works best so far
|
||||
display.setTiming(225);
|
||||
|
||||
// delay(4000);
|
||||
display.fillScreen(0);
|
||||
display.setCursor(0, 0);
|
||||
display.setTextSize(1);
|
||||
display.println("Connecting...");
|
||||
display.display();
|
||||
|
||||
// display.setFont(&FreeSerif12pt7b);
|
||||
// display.setFont(&FreeSerifItalic12pt7b);
|
||||
|
||||
//init and get the time
|
||||
// configTime(gmtOffset_sec, daylightOffset_sec, ntpServer);
|
||||
configTzTime(MYTZ, ntpServer);
|
||||
|
||||
xTaskCreate(
|
||||
toggleLED, // Function that should be called
|
||||
"Toggle LED", // Name of the task (for debugging)
|
||||
1000, // Stack size (bytes)
|
||||
NULL, // Parameter to pass
|
||||
1, // Task priority
|
||||
NULL // Task handle
|
||||
);
|
||||
|
||||
next_display = millis() / 1000 * 1000;
|
||||
|
||||
// // TEST CODE
|
||||
// do{
|
||||
// ArduinoOTA.handle();
|
||||
|
||||
// digitalWrite(led1, HIGH);
|
||||
|
||||
// vTaskDelay(50 / portTICK_PERIOD_MS);
|
||||
|
||||
// // Turn the LED off
|
||||
// digitalWrite(led1, LOW);
|
||||
|
||||
// vTaskDelay(50 / portTICK_PERIOD_MS);
|
||||
|
||||
// }while(true);
|
||||
|
||||
// hassio
|
||||
// you don't need to verify return status
|
||||
// client.begin(mac);
|
||||
|
||||
// set device's details (optional)
|
||||
device.setName("FlipDotDisplay");
|
||||
device.setSoftwareVersion("1.0.0");
|
||||
|
||||
// set icon (optional)
|
||||
flipDotDisplay.setIcon("mdi:lightbulb");
|
||||
flipDotDisplay.setName("FlipDot Display Clock");
|
||||
|
||||
// handle switch state
|
||||
flipDotDisplay.onCommand(onSwitchStateChanged);
|
||||
|
||||
|
||||
powerSwitch.setIcon("mdi:lightbulb");
|
||||
powerSwitch.setName("FlipDot Display Power");
|
||||
powerSwitch.onCommand(onPowerSwitchStateChanged);
|
||||
|
||||
mqtt.begin(BROKER_ADDR, MQTT_USER, MQTT_PASSWORD);
|
||||
|
||||
display.fillScreen(0);
|
||||
display.display();
|
||||
|
||||
hour = millis() / 1000 / 60 / 60;
|
||||
minute = (millis() / 1000 / 60) % 60;
|
||||
second = (millis() / 1000 % 60);
|
||||
}
|
||||
|
||||
void toggleLED(void *parameter)
|
||||
{
|
||||
for (;;)
|
||||
{ // infinite loop
|
||||
if((power == false) || (!(hour >= 7 && hour < 22)))
|
||||
{
|
||||
// OFF
|
||||
digitalWrite(led1, LOW);
|
||||
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
||||
continue;
|
||||
}
|
||||
|
||||
// Turn the LED on
|
||||
digitalWrite(led1, HIGH);
|
||||
|
||||
if (wifiStatus)
|
||||
{
|
||||
// Pause the task for 500ms
|
||||
vTaskDelay(500 / portTICK_PERIOD_MS);
|
||||
}
|
||||
else
|
||||
vTaskDelay(100 / portTICK_PERIOD_MS);
|
||||
|
||||
// Turn the LED off
|
||||
digitalWrite(led1, LOW);
|
||||
|
||||
if (wifiStatus)
|
||||
{
|
||||
// Pause the task again for 500ms
|
||||
vTaskDelay(500 / portTICK_PERIOD_MS);
|
||||
}
|
||||
else
|
||||
vTaskDelay(100 / portTICK_PERIOD_MS);
|
||||
}
|
||||
}
|
||||
|
||||
#define DEG2RAD 0.0174532925
|
||||
void drawRotatedBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, bool color, uint16_t angle)
|
||||
{
|
||||
int16_t newx, newy;
|
||||
uint8_t data = 0;
|
||||
|
||||
float cosa = cos(angle * DEG2RAD), sina = sin(angle * DEG2RAD);
|
||||
|
||||
x = x - ((w * cosa / 2) - (h * sina / 2));
|
||||
y = y - ((h * cosa / 2) + (w * sina / 2));
|
||||
|
||||
for (int16_t j = 0; j < h; j++)
|
||||
{
|
||||
for (int16_t i = 0; i < w; i++)
|
||||
{
|
||||
if ((j * w + i) & 7)
|
||||
data <<= 1;
|
||||
else
|
||||
data = pgm_read_byte(bitmap++);
|
||||
|
||||
newx = 0.5 + x + ((i * cosa) - (j * sina));
|
||||
newy = 0.5 + y + ((j * cosa) + (i * sina));
|
||||
|
||||
if (data & 0x80)
|
||||
display.drawPixel(newx, newy, color);
|
||||
//else display.drawPixel(newx, newy, 0);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void turnPowerOn(bool overide = false)
|
||||
{
|
||||
if(power == true || overide == true)
|
||||
relayOn();
|
||||
configTzTime(TIMEZONE, NTP_SERVER);
|
||||
homeAssistantBegin(controller);
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
ArduinoOTA.handle();
|
||||
mqtt.loop();
|
||||
otaLoop();
|
||||
homeAssistantLoop();
|
||||
|
||||
// While the Nano is being flashed, nothing else may talk to it
|
||||
if (nanoFlashBridge.handle())
|
||||
return;
|
||||
// While the Nano is being flashed, nothing else may talk to it
|
||||
if (flashBridge.handle())
|
||||
return;
|
||||
|
||||
updatePower();
|
||||
struct tm now = {};
|
||||
bool time_valid = getLocalTime(&now, 0);
|
||||
controller.update(millis(), time_valid, now.tm_hour, now.tm_min);
|
||||
|
||||
wifiStatus = WiFi.waitForConnectResult() == WL_CONNECTED;
|
||||
|
||||
if(next_display < millis())
|
||||
{
|
||||
if (hassioDisplayStatus)
|
||||
// if (false)
|
||||
{
|
||||
char t[20];
|
||||
char timeStringBuff[50]; //50 chars should be enough
|
||||
|
||||
struct tm timeinfo;
|
||||
if (!getLocalTime(&timeinfo))
|
||||
{
|
||||
// printFromStart("Failed to get time");
|
||||
// return;
|
||||
|
||||
// sprintf(t, "%02d:%02d:%02d\0", millis() / 1000 / 60 / 60, (millis() / 1000 / 60) % 60, (millis() / 1000 % 60));
|
||||
// sprintf(t, "%02d%02d%02d\0", millis() / 1000 / 60 / 60, (millis() / 1000 / 60) % 60, (millis() / 1000 % 60));
|
||||
}
|
||||
else
|
||||
{
|
||||
// const char *format = "%H:%M:%S";
|
||||
const char *format = "%H:%M";
|
||||
|
||||
// strftime(timeStringBuff, sizeof(timeStringBuff), "%A, %B %d %Y %H:%M:%S", &timeinfo);
|
||||
strftime(timeStringBuff, sizeof(timeStringBuff), format, &timeinfo);
|
||||
String asString(timeStringBuff);
|
||||
|
||||
hour = timeinfo.tm_hour;
|
||||
minute = timeinfo.tm_min;
|
||||
second = timeinfo.tm_sec;
|
||||
}
|
||||
|
||||
// display.setFont(&FreeSerif12pt7b);
|
||||
|
||||
// if ((millis() / 1000 % 60) <= 30)
|
||||
// display.setFont(&FreeSerif12pt7b);
|
||||
// else
|
||||
// display.setFont(&FreeSerifItalic12pt7b);
|
||||
|
||||
if(hour <= 7 || (hour >= 23 && minute > 30))
|
||||
{
|
||||
if (relay_on)
|
||||
{
|
||||
display.fillScreen(0);
|
||||
display.display();
|
||||
}
|
||||
|
||||
turnPowerOff();
|
||||
}
|
||||
// show time between 7 and 23 with updates every minute, and after that; every 15 minutes.
|
||||
else if((hour >= 7 && hour < 22) || (minute % 15 == 0))
|
||||
// else if((hour >= 7 && hour < 19) || (minute % 5 == 0))
|
||||
// else if(true)
|
||||
{
|
||||
turnPowerOn();
|
||||
|
||||
// power can be off (Home Assistant power switch): then nothing is sent
|
||||
if (relay_on)
|
||||
{
|
||||
int xoffset = 3;
|
||||
|
||||
display.fillScreen(0);
|
||||
// display.setTextSize(2);
|
||||
display.setTextSize(1);
|
||||
// display.setCursor(7, 3);
|
||||
display.setCursor(xoffset + 0, 19 - 2);
|
||||
display.setTextWrap(false);
|
||||
// display.print(t);
|
||||
|
||||
// if(minute % 2 == 0)
|
||||
if(hour >= 17 || hour <= 6)
|
||||
display.drawBitmap(xoffset + 0, 0, yawning_pikachu_bitmap_yawning_pikachu_black_border, 35, 19, 1);
|
||||
else
|
||||
display.drawBitmap(xoffset + 0, 0, pikachu_bitmap_pikachu_black_border, 35, 19, 1);
|
||||
|
||||
display.drawBitmap(xoffset + 35, 0, clock_thought_bubble_bitmap_clock_thought_bubble, 46, 19, 1);
|
||||
|
||||
display.setCursor(xoffset + 43, (19/2) - 5);
|
||||
display.print(timeStringBuff);
|
||||
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
turnPowerOff();
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
if (relay_on)
|
||||
{
|
||||
display.fillScreen(0);
|
||||
display.drawBitmap(0, 0, nintendo_bitmap_Nintendo_new, 84, 19, 1);
|
||||
|
||||
// display.drawBitmap(0, 0, nintendo_bitmap_panda_inverted, 17, 18, 1);
|
||||
// display.drawBitmap(18, 0, nintendo_bitmap_panda_inverted, 17, 18, 1);
|
||||
// display.drawBitmap(18*2, 0, nintendo_bitmap_panda_inverted, 17, 18, 1);
|
||||
// display.drawBitmap(18*3, 0, nintendo_bitmap_panda_inverted, 17, 18, 1);
|
||||
// display.drawBitmap(18*4, 0, nintendo_bitmap_panda_inverted, 17, 18, 1);
|
||||
|
||||
// drawRotatedBitmap(0, 0, nintendo_bitmap_Nintendo_new, 17, 18, 1, 90);
|
||||
|
||||
// Text inside border.
|
||||
// display.drawBitmap(0, 0, nintendo_bitmap_nintendo_border, 84, 19, 1);
|
||||
// display.setFont();
|
||||
// display.setTextSize(1);
|
||||
// display.setTextWrap(false);
|
||||
// display.setCursor(5, 4);
|
||||
// display.print("Nintendo");
|
||||
|
||||
// display.setFont();
|
||||
// // display.setTextSize(2);
|
||||
// display.setTextSize(1);
|
||||
// display.setCursor(0, 0);
|
||||
// display.setTextWrap(true);
|
||||
// // display.print(t);
|
||||
// display.print("Carla & Jan Kragt");
|
||||
|
||||
display.display();
|
||||
}
|
||||
|
||||
turnPowerOff();
|
||||
}
|
||||
|
||||
next_display += 1000;
|
||||
// next_display += 500;
|
||||
}
|
||||
}
|
||||
digitalWrite(LED_PIN, statusLedLevel(millis(), wifiConnected(), nano.isOn()));
|
||||
}
|
||||
@@ -1,4 +1,4 @@
|
||||
#include "nano_flash_bridge.h"
|
||||
#include "nano_link/nano_flash_bridge.h"
|
||||
|
||||
NanoFlashBridge::NanoFlashBridge(uint16_t port, HardwareSerial &serial, void (*onStart)(uint32_t baud), void (*onEnd)())
|
||||
: _server(port), _serial(serial), _onStart(onStart), _onEnd(onEnd)
|
||||
File renamed without changes.
@@ -0,0 +1,116 @@
|
||||
#include "nano_link/nano_link.h"
|
||||
|
||||
#include "config.h"
|
||||
|
||||
// Relay input is active low
|
||||
static const uint8_t RELAY_ON = LOW;
|
||||
static const uint8_t RELAY_OFF = HIGH;
|
||||
|
||||
NanoLink::NanoLink(HardwareSerial &serial, int rx_pin, int tx_pin, int relay_pin, int reset_pin)
|
||||
: _serial(serial), _rx_pin(rx_pin), _tx_pin(tx_pin), _relay_pin(relay_pin), _reset_pin(reset_pin)
|
||||
{
|
||||
}
|
||||
|
||||
void NanoLink::begin()
|
||||
{
|
||||
digitalWrite(_relay_pin, RELAY_OFF);
|
||||
pinMode(_relay_pin, OUTPUT);
|
||||
pinMode(_tx_pin, INPUT);
|
||||
if (_reset_pin >= 0)
|
||||
{
|
||||
digitalWrite(_reset_pin, LOW);
|
||||
pinMode(_reset_pin, OUTPUT);
|
||||
}
|
||||
}
|
||||
|
||||
Stream &NanoLink::stream()
|
||||
{
|
||||
return _serial;
|
||||
}
|
||||
|
||||
bool NanoLink::isOn()
|
||||
{
|
||||
return _on;
|
||||
}
|
||||
|
||||
void NanoLink::on()
|
||||
{
|
||||
if (_on)
|
||||
return;
|
||||
|
||||
_beginSerial(NANO_BAUD);
|
||||
digitalWrite(_relay_pin, RELAY_ON);
|
||||
_waitForReady();
|
||||
_on = true;
|
||||
}
|
||||
|
||||
void NanoLink::off()
|
||||
{
|
||||
digitalWrite(_relay_pin, RELAY_OFF);
|
||||
_on = false;
|
||||
|
||||
// An idle UART TX line is high and would power the Nano through its RX pin
|
||||
_serial.flush();
|
||||
_serial.end();
|
||||
pinMode(_tx_pin, INPUT);
|
||||
}
|
||||
|
||||
// The old bootloader also starts after a power cycle; Optiboot only after a reset pulse.
|
||||
void NanoLink::startBootloader(uint32_t baud)
|
||||
{
|
||||
off();
|
||||
delay(NANO_POWER_OFF_TIME);
|
||||
|
||||
_beginSerial(baud);
|
||||
digitalWrite(_relay_pin, RELAY_ON);
|
||||
|
||||
if (_reset_pin >= 0)
|
||||
{
|
||||
delay(NANO_RESET_DELAY);
|
||||
digitalWrite(_reset_pin, HIGH);
|
||||
delay(NANO_RESET_PULSE);
|
||||
digitalWrite(_reset_pin, LOW);
|
||||
}
|
||||
|
||||
// drop anything the Nano sent before its bootloader started
|
||||
_drain();
|
||||
// Not "on" for the display: the bootloader is running, not the display firmware
|
||||
}
|
||||
|
||||
void NanoLink::_beginSerial(uint32_t baud)
|
||||
{
|
||||
_serial.begin(baud, SERIAL_8N1, _rx_pin, _tx_pin);
|
||||
// drop old data (e.g. ERR replies) so only a new READY counts
|
||||
_drain();
|
||||
}
|
||||
|
||||
void NanoLink::_drain()
|
||||
{
|
||||
while (_serial.available())
|
||||
_serial.read();
|
||||
}
|
||||
|
||||
// Wait until the Nano reports READY after booting, or until NANO_BOOT_TIMEOUT
|
||||
void NanoLink::_waitForReady()
|
||||
{
|
||||
char line[16];
|
||||
uint8_t len = 0;
|
||||
uint32_t start = millis();
|
||||
while (millis() - start < NANO_BOOT_TIMEOUT)
|
||||
{
|
||||
while (_serial.available())
|
||||
{
|
||||
char c = _serial.read();
|
||||
if (c == '\n')
|
||||
{
|
||||
line[len] = '\0';
|
||||
if (strstr(line, "READY"))
|
||||
return;
|
||||
len = 0;
|
||||
}
|
||||
else if (len < sizeof(line) - 1)
|
||||
line[len++] = c;
|
||||
}
|
||||
delay(10);
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
#include "logic/display_controller.h"
|
||||
|
||||
// The relay that powers the panels and the Nano, and the serial link to the Nano.
|
||||
class NanoLink : public DisplayPower
|
||||
{
|
||||
public:
|
||||
NanoLink(HardwareSerial &serial, int rx_pin, int tx_pin, int relay_pin, int reset_pin);
|
||||
|
||||
// Set up the pins; the display starts switched off
|
||||
void begin();
|
||||
|
||||
// The serial port to the Nano (for the BROSE9323 driver)
|
||||
Stream &stream();
|
||||
|
||||
bool isOn() override;
|
||||
// Switch on, then wait for the Nano's READY (or NANO_BOOT_TIMEOUT)
|
||||
void on() override;
|
||||
// Switch off and release the TX pin
|
||||
void off() override;
|
||||
|
||||
// For flashing: restart the Nano so its bootloader runs, and talk to it at `baud`
|
||||
void startBootloader(uint32_t baud);
|
||||
|
||||
private:
|
||||
HardwareSerial &_serial;
|
||||
const int _rx_pin, _tx_pin, _relay_pin, _reset_pin;
|
||||
bool _on = false;
|
||||
|
||||
void _beginSerial(uint32_t baud);
|
||||
void _drain();
|
||||
void _waitForReady();
|
||||
};
|
||||
@@ -0,0 +1,55 @@
|
||||
#include "net/home_assistant.h"
|
||||
|
||||
#include <ArduinoHA.h>
|
||||
#include <WiFi.h>
|
||||
|
||||
#include "config.h"
|
||||
#include "credentials.h"
|
||||
|
||||
static WiFiClient client;
|
||||
static HADevice device(HA_DEVICE_ID, sizeof(HA_DEVICE_ID));
|
||||
static HAMqtt mqtt(client, device);
|
||||
|
||||
// Unique ids: do not change, Home Assistant's entities are linked to them
|
||||
static HASwitch clockSwitch("FlipDotDisplayClock");
|
||||
static HASwitch powerSwitch("FlipDotDisplayPower");
|
||||
|
||||
static DisplayController *displayController = nullptr;
|
||||
|
||||
// The switches are not optimistic: the new state must be reported back to Home Assistant
|
||||
static void onClockCommand(bool state, HASwitch *sender)
|
||||
{
|
||||
displayController->setClockEnabled(state);
|
||||
sender->setState(state);
|
||||
}
|
||||
|
||||
static void onPowerCommand(bool state, HASwitch *sender)
|
||||
{
|
||||
displayController->setPowerEnabled(state);
|
||||
sender->setState(state);
|
||||
}
|
||||
|
||||
void homeAssistantBegin(DisplayController &controller)
|
||||
{
|
||||
displayController = &controller;
|
||||
|
||||
device.setName(HA_DEVICE_NAME);
|
||||
device.setSoftwareVersion(HA_SOFTWARE_VERSION);
|
||||
|
||||
clockSwitch.setName("FlipDot Display Clock");
|
||||
clockSwitch.setIcon("mdi:lightbulb");
|
||||
clockSwitch.setCurrentState(controller.clockEnabled());
|
||||
clockSwitch.onCommand(onClockCommand);
|
||||
|
||||
powerSwitch.setName("FlipDot Display Power");
|
||||
powerSwitch.setIcon("mdi:lightbulb");
|
||||
powerSwitch.setCurrentState(controller.powerEnabled());
|
||||
powerSwitch.onCommand(onPowerCommand);
|
||||
|
||||
mqtt.begin(BROKER_ADDR, MQTT_USER, MQTT_PASSWORD);
|
||||
}
|
||||
|
||||
void homeAssistantLoop()
|
||||
{
|
||||
mqtt.loop();
|
||||
}
|
||||
@@ -0,0 +1,9 @@
|
||||
#pragma once
|
||||
|
||||
#include "logic/display_controller.h"
|
||||
|
||||
// Home Assistant integration over MQTT (with discovery). Two switches:
|
||||
// FlipDot Display Clock on = clock, off = Nintendo logo
|
||||
// FlipDot Display Power off = clear the display and switch it off
|
||||
void homeAssistantBegin(DisplayController &controller);
|
||||
void homeAssistantLoop();
|
||||
@@ -0,0 +1,70 @@
|
||||
#include "net/wifi_ota.h"
|
||||
|
||||
#include <ArduinoOTA.h>
|
||||
#include <WiFi.h>
|
||||
#include <rom/rtc.h>
|
||||
|
||||
#include "config.h"
|
||||
#include "credentials.h"
|
||||
|
||||
void wifiBegin()
|
||||
{
|
||||
WiFi.setHostname(HOSTNAME);
|
||||
WiFi.mode(WIFI_STA);
|
||||
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
|
||||
Serial.println("Connecting to WiFi");
|
||||
if (WiFi.waitForConnectResult() != WL_CONNECTED)
|
||||
{
|
||||
Serial.println("WiFi connection failed, restarting");
|
||||
delay(5000);
|
||||
ESP.restart();
|
||||
}
|
||||
// Later disconnects are handled by the WiFi driver's auto reconnect
|
||||
Serial.print("Connected, IP ");
|
||||
Serial.println(WiFi.localIP());
|
||||
}
|
||||
|
||||
bool wifiConnected()
|
||||
{
|
||||
return WiFi.status() == WL_CONNECTED;
|
||||
}
|
||||
|
||||
void otaBegin()
|
||||
{
|
||||
ArduinoOTA.setHostname(HOSTNAME);
|
||||
ArduinoOTA.onStart([]() { Serial.println("OTA update started"); });
|
||||
ArduinoOTA.onEnd([]() { Serial.println("OTA update done"); });
|
||||
ArduinoOTA.onError([](ota_error_t error) { Serial.printf("OTA error %u\n", error); });
|
||||
ArduinoOTA.begin();
|
||||
}
|
||||
|
||||
void otaLoop()
|
||||
{
|
||||
ArduinoOTA.handle();
|
||||
}
|
||||
|
||||
// A normal start is a power on of CPU 0 or a start of CPU 1 by CPU 0
|
||||
static bool unexpectedReset()
|
||||
{
|
||||
RESET_REASON cpu0 = rtc_get_reset_reason(0);
|
||||
RESET_REASON cpu1 = rtc_get_reset_reason(1);
|
||||
Serial.printf("Reset reason: CPU0 %d, CPU1 %d\n", cpu0, cpu1);
|
||||
return cpu0 != POWERON_RESET && cpu1 != EXT_CPU_RESET;
|
||||
}
|
||||
|
||||
void otaPanicWindow(int led_pin)
|
||||
{
|
||||
if (!unexpectedReset())
|
||||
return;
|
||||
|
||||
Serial.println("Unexpected reset: waiting for an OTA update");
|
||||
uint32_t start = millis();
|
||||
while (millis() - start < OTA_PANIC_WINDOW)
|
||||
{
|
||||
ArduinoOTA.handle();
|
||||
// fast blink
|
||||
digitalWrite(led_pin, (millis() / 50) % 2);
|
||||
delay(10);
|
||||
}
|
||||
digitalWrite(led_pin, LOW);
|
||||
}
|
||||
@@ -0,0 +1,14 @@
|
||||
#pragma once
|
||||
|
||||
// Connect to WiFi. Restarts the ESP32 when the first connection fails.
|
||||
void wifiBegin();
|
||||
|
||||
bool wifiConnected();
|
||||
|
||||
// Over-the-air updates of the ESP32 firmware (pio run -e esp32 -t upload)
|
||||
void otaBegin();
|
||||
void otaLoop();
|
||||
|
||||
// After a crash or unexpected reset, run only OTA for OTA_PANIC_WINDOW, so a firmware that
|
||||
// crashes at boot can still be replaced. Does nothing after a normal power on.
|
||||
void otaPanicWindow(int led_pin);
|
||||
Reference in new issue
Block a user