Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
18 lines
622 B
C++
18 lines
622 B
C++
#pragma once
|
|
// ServoDriver keeps its servo centre trims here. Backed by RAM, starts erased (0xFF),
|
|
// so every simulated power-on starts with no trims stored.
|
|
#include <Arduino.h>
|
|
|
|
class SimEEPROM {
|
|
public:
|
|
template <class T> T& get(int addr, T& t) { memcpy(&t, mem_ + addr, sizeof(T)); return t; }
|
|
template <class T> const T& put(int addr, const T& t) { memcpy(mem_ + addr, &t, sizeof(T)); return t; }
|
|
uint8_t read(int addr) { return mem_[addr]; }
|
|
void write(int addr, uint8_t v) { mem_[addr] = v; }
|
|
SimEEPROM() { memset(mem_, 0xFF, sizeof(mem_)); }
|
|
|
|
private:
|
|
uint8_t mem_[4284];
|
|
};
|
|
extern SimEEPROM EEPROM;
|