remote_v2.scad: a new remote for the same electronics, 216 x 116 x 32 mm, ASA, two shells printed without supports and joined with M3 heat-set inserts. Hangs level from a neck strap on a balance-point eyelet (top face or front edge) with a fold-out body brace; kickstand for the table. JH-D300X-R1 sticks clamp the plate; main perfboard (Teensy 4.0, nRF24, IMU) clamped at its sides under the display; UPS board with its LEDs through the floor. Red honeycomb and white ON/OFF inlays in the first 3 layers. Every part checked for collisions. - stl/remote_v2/: print-ready STLs, plus a multi-part 3MF (export_3mf.py) with the inlays on filaments 2 and 3 - ARCHIVE.md: the original remote with the owner's photos; README shows v2 and how to print it - Notes for later: battery-voltage reading, IMU on Wire (18/19) with two stick axes moved to A7/A8, a stable 6 V supply for the 18 servos - remote.scad: its sticks are JH-D300X-R1 (the model uses the D400X drawing) - *.3mf through Git LFS; repo README says Teensy 4.0 remote Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
116 lines
5.3 KiB
Python
116 lines
5.3 KiB
Python
"""Combine STL parts into one multi-part 3MF for OrcaSlicer / PrusaSlicer.
|
|
|
|
python export_3mf.py (from hardware/openscad, after the STL export)
|
|
|
|
Writes stl/remote_v2/remote_v2_top_multicolor.3mf: the top shell with its
|
|
two inlays as ONE object with three parts, in the same frame, each part on
|
|
its own extruder/filament (1 = case, 2 = honeycomb, 3 = ON/OFF text). The
|
|
part list is in PARTS below. Uses the PrusaSlicer 3MF layout (one mesh, the
|
|
parts as triangle ranges in Metadata/Slic3r_PE_model.config), which
|
|
OrcaSlicer and PrusaSlicer both read.
|
|
"""
|
|
import os
|
|
import zipfile
|
|
|
|
HERE = os.path.dirname(os.path.abspath(__file__))
|
|
OUT_DIR = os.path.join(HERE, "stl", "remote_v2")
|
|
|
|
# (file, part name, extruder)
|
|
PARTS = [
|
|
("remote_v2_top.stl", "top shell (black)", 1),
|
|
("remote_v2_inlay.stl", "honeycomb inlay (red)", 2),
|
|
("remote_v2_text.stl", "ON-OFF inlay (white)", 3),
|
|
]
|
|
OUT = "remote_v2_top_multicolor.3mf"
|
|
|
|
|
|
def read_stl(path):
|
|
"""Triangles of an ASCII or binary STL as lists of 3 vertex tuples."""
|
|
data = open(path, "rb").read()
|
|
tris = []
|
|
if data[:5] == b"solid" and b"facet" in data[:400]:
|
|
verts = []
|
|
for line in data.decode("ascii", "replace").splitlines():
|
|
t = line.split()
|
|
if t and t[0] == "vertex":
|
|
verts.append(tuple(float(x) for x in t[1:4]))
|
|
if len(verts) == 3:
|
|
tris.append(verts)
|
|
verts = []
|
|
else:
|
|
import struct
|
|
n = struct.unpack_from("<I", data, 80)[0]
|
|
for i in range(n):
|
|
f = struct.unpack_from("<12f", data, 84 + 50 * i)
|
|
tris.append([tuple(f[3:6]), tuple(f[6:9]), tuple(f[9:12])])
|
|
return tris
|
|
|
|
|
|
def main():
|
|
vertices, index, triangles, ranges = [], {}, [], []
|
|
for fname, name, extruder in PARTS:
|
|
first = len(triangles)
|
|
for tri in read_stl(os.path.join(OUT_DIR, fname)):
|
|
ids = []
|
|
for v in tri:
|
|
key = (round(v[0], 5), round(v[1], 5), round(v[2], 5), len(ranges)) # no sharing between parts
|
|
if key not in index:
|
|
index[key] = len(vertices)
|
|
vertices.append(v)
|
|
ids.append(index[key])
|
|
if len(set(ids)) == 3:
|
|
triangles.append(ids)
|
|
ranges.append((first, len(triangles) - 1, name, extruder))
|
|
|
|
model = ['<?xml version="1.0" encoding="UTF-8"?>',
|
|
'<model unit="millimeter" xml:lang="en-US" '
|
|
'xmlns="http://schemas.microsoft.com/3dmanufacturing/core/2015/02" '
|
|
'xmlns:slic3rpe="http://schemas.slic3r.org/3mf/2017/06">',
|
|
' <metadata name="slic3rpe:Version3mf">1</metadata>',
|
|
' <metadata name="Title">remote_v2 top shell with inlays</metadata>',
|
|
' <resources>',
|
|
' <object id="1" type="model">',
|
|
' <mesh>',
|
|
' <vertices>']
|
|
model += [' <vertex x="%.5f" y="%.5f" z="%.5f"/>' % v for v in vertices]
|
|
model += [' </vertices>', ' <triangles>']
|
|
model += [' <triangle v1="%d" v2="%d" v3="%d"/>' % tuple(t) for t in triangles]
|
|
model += [' </triangles>', ' </mesh>', ' </object>', ' </resources>',
|
|
' <build>', ' <item objectid="1"/>', ' </build>', '</model>']
|
|
|
|
config = ['<?xml version="1.0" encoding="UTF-8"?>', '<config>',
|
|
' <object id="1" instances_count="1">',
|
|
' <metadata type="object" key="name" value="remote_v2_top_multicolor"/>']
|
|
for first, last, name, extruder in ranges:
|
|
config += [' <volume firstid="%d" lastid="%d">' % (first, last),
|
|
' <metadata type="volume" key="name" value="%s"/>' % name,
|
|
' <metadata type="volume" key="volume_type" value="ModelPart"/>',
|
|
' <metadata type="volume" key="extruder" value="%d"/>' % extruder,
|
|
' </volume>']
|
|
config += [' </object>', '</config>']
|
|
|
|
content_types = ('<?xml version="1.0" encoding="UTF-8"?>\n'
|
|
'<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types">\n'
|
|
' <Default Extension="rels" ContentType="application/vnd.openxmlformats-package.relationships+xml"/>\n'
|
|
' <Default Extension="model" ContentType="application/vnd.ms-package.3dmanufacturing-3dmodel+xml"/>\n'
|
|
' <Default Extension="config" ContentType="text/xml"/>\n'
|
|
'</Types>\n')
|
|
rels = ('<?xml version="1.0" encoding="UTF-8"?>\n'
|
|
'<Relationships xmlns="http://schemas.openxmlformats.org/package/2006/relationships">\n'
|
|
' <Relationship Target="/3D/3dmodel.model" Id="rel0" '
|
|
'Type="http://schemas.microsoft.com/3dmanufacturing/2013/01/3dmodel"/>\n'
|
|
'</Relationships>\n')
|
|
|
|
path = os.path.join(OUT_DIR, OUT)
|
|
with zipfile.ZipFile(path, "w", zipfile.ZIP_DEFLATED) as z:
|
|
z.writestr("[Content_Types].xml", content_types)
|
|
z.writestr("_rels/.rels", rels)
|
|
z.writestr("3D/3dmodel.model", "\n".join(model) + "\n")
|
|
z.writestr("Metadata/Slic3r_PE_model.config", "\n".join(config) + "\n")
|
|
print("%s: %d vertices, %d triangles, parts %s" % (OUT, len(vertices), len(triangles),
|
|
", ".join("%s %d-%d" % (r[2], r[0], r[1]) for r in ranges)))
|
|
|
|
|
|
if __name__ == "__main__":
|
|
main()
|