Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
32 lines
1011 B
C++
32 lines
1011 B
C++
#pragma once
|
|
#include <Arduino.h>
|
|
#include <HexapodProtocol.h> // CmdPacket + FLAG_* + radio settings, shared with the remote (shared/)
|
|
|
|
class Comms {
|
|
public:
|
|
bool begin();
|
|
void update(); // call every loop; polls the radio if present
|
|
bool linkOk() const { return link_ok_; }
|
|
const CmdPacket& latest() const { return packet_; }
|
|
|
|
// Lets the serial test harness (or, later, real radio) inject a packet directly.
|
|
void injectPacket(const CmdPacket& p) { packet_ = p; last_rx_ms_ = millis(); }
|
|
|
|
// Telemetry for the remote. Goes out as the ack payload of the next packet
|
|
// received, so set it every loop.
|
|
void setTelemetry(const Telemetry& t) { telemetry_ = t; }
|
|
uint8_t packetsPerSec() const { return rx_per_sec_; }
|
|
|
|
private:
|
|
CmdPacket packet_;
|
|
uint32_t last_rx_ms_ = 0;
|
|
bool link_ok_ = false;
|
|
bool radio_present_ = false;
|
|
Telemetry telemetry_;
|
|
uint16_t rx_count_ = 0;
|
|
uint8_t rx_per_sec_ = 0;
|
|
uint32_t rate_window_ms_ = 0;
|
|
|
|
void loadAckPayload();
|
|
};
|