mangavalkandClaude Opus 5.5 60605209fb 2026: remote v2 (flat console for the twist-grip sticks), STL/3MF exports, archive page
remote_v2.scad: a new remote for the same electronics, 216 x 116 x 32 mm,
ASA, two shells printed without supports and joined with M3 heat-set
inserts. Hangs level from a neck strap on a balance-point eyelet (top face
or front edge) with a fold-out body brace; kickstand for the table.
JH-D300X-R1 sticks clamp the plate; main perfboard (Teensy 4.0, nRF24,
IMU) clamped at its sides under the display; UPS board with its LEDs
through the floor. Red honeycomb and white ON/OFF inlays in the first
3 layers. Every part checked for collisions.

- stl/remote_v2/: print-ready STLs, plus a multi-part 3MF (export_3mf.py)
  with the inlays on filaments 2 and 3
- ARCHIVE.md: the original remote with the owner's photos; README shows v2
  and how to print it
- Notes for later: battery-voltage reading, IMU on Wire (18/19) with two
  stick axes moved to A7/A8, a stable 6 V supply for the 18 servos
- remote.scad: its sticks are JH-D300X-R1 (the model uses the D400X drawing)
- *.3mf through Git LFS; repo README says Teensy 4.0 remote

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 18:57:49 +01:00

Hexapod robot

Everything about my six-legged walking robot, from the first FPGA-driven version in 2009 to the current Teensy robot with its firmware-in-the-loop Unity simulation. Each generation has its own folder, named after the year it started, with its firmware, simulation, hardware, documents and photos together.

Working on the robot now? Go to 2026-current/. Everything else is history.

Timeline

Folder When Hardware What it did
2009-fpga/ 2009–2011 FPGA, own frame design the first version. The code is lost; photos, videos and the frame design (original-frame/, the base of every version up to 2023) are left
2011-firefly-mega-ssc32/ 2011–2012 Arduino Mega 2560 + Lynxmotion SSC-32 "FireFly": walking sequences with a Wii Nunchuk, later IR remote, ultrasonic radar head and GPS
2012-simulation/ 2012–2014 PC a Visual Studio leg-IK visualiser (2012) and a Processing 3D simulator (2014)
2014-ik-core-task-queue/ ≤ Feb 2014 Arduino a rewrite of the IK core around a task queue, without servo output yet
2016-ssc32-processing-port/ ~2016–2018 Arduino + SSC-32 the Processing simulator's classes ported to Arduino, driving the SSC-32 again
2018-unity-sim/ 2018–2023 PC + SSC-32, later the Teensy Unity computes the walking and drives the robot: first the SSC-32 over serial, from 2019 through the remote
2019-teensy-nrf24/ 2019–2022 Teensy 3.6 on the robot (replaces the SSC-32), Teensy remote with Nextion screen, nRF24L01 servo passthrough: Unity → remote over USB → radio → robot
2026-current/ 2026– Teensy 3.6 robot, Teensy 4.0 remote, Fusion 360 designed parts, OpenSCAD rebuild and new remote IK, gait, body pose and IMU stabilisation on the robot; the unchanged firmware also runs inside Unity

Repository notes

  • Photos, videos, PDFs, Office files, CAD and other binaries are stored with Git LFS (see .gitattributes). A normal clone downloads them; set GIT_LFS_SKIP_SMUDGE=1 to clone only the code.
  • Files are stored exactly as they were (no line-ending conversion), so old code is byte-for-byte the original.
  • This repo was put together in October 2026 from the Gitea repos Hexapod_2027, Hexapod, Hexapod-App, Hexapod-processing, Hexapod_Simulation_Unity, remote and Hexapod-Archief, the NAS folder Projecten\Electronics\Hexapod, the Arduino sketchbook and the Fusion 360 exports. The history of every repo except Hexapod-Archief is kept (its own history only held the same photos and videos again). Old code versions that only existed as rar files or backup folders are dated commits.
S
Description
No description provided
Readme
1 GiB
0 Stars 1 Watchers 0 Forks
Languages
C++ 52.9%
C# 16.7%
OpenSCAD 11.4%
C 10.2%
Python 5%
Other 3.8%