Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
43 lines
2.2 KiB
C++
43 lines
2.2 KiB
C++
#include "SerialConsole.h"
|
|
#include <Arduino.h>
|
|
|
|
bool SerialConsole::poll(UiEvent& ui, Local& local) {
|
|
ui = UiEvent{};
|
|
local = Local::None;
|
|
while (Serial.available()) {
|
|
char c = Serial.read();
|
|
switch (c) {
|
|
case 'a': ui.cmd = UiCmd::ToggleArm; return true;
|
|
case 'k': ui.cmd = UiCmd::Disarm; return true;
|
|
case 's': ui.cmd = UiCmd::ToggleStand; return true;
|
|
case 'g': ui.cmd = UiCmd::ToggleGait; return true;
|
|
case 'm': ui.cmd = UiCmd::ToggleWalkMode; return true;
|
|
case 't': ui.cmd = UiCmd::ToggleRStickXlate; return true;
|
|
case 'r': ui.cmd = UiCmd::ToggleRemoteGyro; return true;
|
|
case 'b': ui.cmd = UiCmd::ToggleRobotGyro; return true;
|
|
case '+': case '=': ui.cmd = UiCmd::SpeedUp; return true;
|
|
case '-': case '_': ui.cmd = UiCmd::SpeedDown; return true;
|
|
case ']': ui.cmd = UiCmd::HeightUp; return true;
|
|
case '[': ui.cmd = UiCmd::HeightDown; return true;
|
|
case 'z': ui.cmd = UiCmd::ZeroGyro; return true;
|
|
case 'c': ui.cmd = UiCmd::CalStartSave; return true;
|
|
case 'x': ui.cmd = UiCmd::CalCancel; return true;
|
|
case 'U': ui.cmd = UiCmd::NextionUpload; return true;
|
|
case 'o': ui.cmd = UiCmd::ServoCalToggle; return true;
|
|
case 'n': ui.cmd = UiCmd::ServoCalNext; return true;
|
|
case ',': ui = UiEvent{ UiCmd::ServoCalTrim, SERVO_TRIM_MINUS_SMALL }; return true;
|
|
case '.': ui = UiEvent{ UiCmd::ServoCalTrim, SERVO_TRIM_PLUS_SMALL }; return true;
|
|
case '<': ui = UiEvent{ UiCmd::ServoCalTrim, SERVO_TRIM_MINUS_BIG }; return true;
|
|
case '>': ui = UiEvent{ UiCmd::ServoCalTrim, SERVO_TRIM_PLUS_BIG }; return true;
|
|
case '0': ui = UiEvent{ UiCmd::ServoCalTrim, SERVO_TRIM_ZERO }; return true;
|
|
case 'w': ui.cmd = UiCmd::ServoCalSave; return true;
|
|
case 'e': ui.cmd = UiCmd::ServoCalRevert; return true;
|
|
case 'p': local = Local::PrintStatus; return true;
|
|
case 'd': local = Local::ToggleDump; return true;
|
|
case 'R': local = Local::ResetCal; return true;
|
|
default: break; // ignore line endings and unknown keys
|
|
}
|
|
}
|
|
return false;
|
|
}
|