remote_v2.scad: a new remote for the same electronics, 216 x 116 x 32 mm,
ASA, two shells printed without supports and joined with M3 heat-set
inserts. Hangs level from a neck strap on a balance-point eyelet (top face
or front edge) with a fold-out body brace; kickstand for the table.
JH-D300X-R1 sticks clamp the plate; main perfboard (Teensy 4.0, nRF24,
IMU) clamped at its sides under the display; UPS board with its LEDs
through the floor. Red honeycomb and white ON/OFF inlays in the first
3 layers. Every part checked for collisions.
- stl/remote_v2/: print-ready STLs, plus a multi-part 3MF (export_3mf.py)
with the inlays on filaments 2 and 3
- ARCHIVE.md: the original remote with the owner's photos; README shows v2
and how to print it
- Notes for later: battery-voltage reading, IMU on Wire (18/19) with two
stick axes moved to A7/A8, a stable 6 V supply for the 18 servos
- remote.scad: its sticks are JH-D300X-R1 (the model uses the D400X drawing)
- *.3mf through Git LFS; repo README says Teensy 4.0 remote
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- original-frame/ moves into 2009-fpga/original-frame/ (the FPGA version introduced the frame).
- Media regrouped by the owner: the two 2011-07-01 PNGs and MOV02256-02259 to FireFly, SNC00198.jpg to the FPGA version.
- Removed from the current version (still in the history): docs/math wisFORlive.docx, wisFORlive3.docx, wisFORlive4.docx and 'z axis rotation.url'.
- READMEs, 2026-current/CLAUDE.md and the root timeline updated to match.
The root README has the timeline of all generations since 2009. Each generation folder explains its hardware and what is in it. .gitattributes turns off line-ending conversion so all files stay as they were.