2026 remote v2: printable bottom shell, notes for the PC radio link
- Bottom shell: the brace pivot bosses stand on pillars and the lip's tie band steps out at 45 deg (both were floating overhangs); the kickstand barrel sits on the bed. Checked by slicing the STLs layer by layer: only bridges are left. STLs re-exported. - remote_v2_top_multicolor.3mf: now the owner's OrcaSlicer project (all parts on two plates); export_3mf.py regenerates the plain multi-part file. - README "Planned": a USB nRF24 stick on the PC so Unity can talk to both the robot and the remote (what to work out), plus pointers to the other notes for later. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
60605209fb
commit
80270ba17e
6 files changed
+44
-11
No files matched your search
@@ -189,6 +189,11 @@ charge/on LEDs show through two slots in the floor.
|
||||
cells dropped. Colours (owner, ASA): black case, red honeycomb (PART
|
||||
"inlay"), white ON/OFF (PART "text"); load "top", "inlay" and "text" as one
|
||||
multi-part object. Each extra colour adds a swap on the first 3 layers only.
|
||||
- Printability (the STLs sliced in 0.2 mm layers, every area not carried by
|
||||
the layer below listed): the brace pivot bosses stand on pillars and the
|
||||
lip's tie band steps out at 45 deg (both were floating overhangs in the
|
||||
first export); what's left are bridges: the 30 mm kickstand-recess roof,
|
||||
the hinge trough, hole and counterbore tops, the USB-C opening.
|
||||
- Checked: no part collides with the shells or with each other, the shells
|
||||
and the inlay don't overlap, kickstand clear at 0 and 70 deg, bail clear
|
||||
from 0 to -180 deg (CGAL intersections).
|
||||
|
||||
Reference in new issue
Block a user