2026 remote v2: printable bottom shell, notes for the PC radio link

- Bottom shell: the brace pivot bosses stand on pillars and the lip's tie
  band steps out at 45 deg (both were floating overhangs); the kickstand
  barrel sits on the bed. Checked by slicing the STLs layer by layer: only
  bridges are left. STLs re-exported.
- remote_v2_top_multicolor.3mf: now the owner's OrcaSlicer project (all
  parts on two plates); export_3mf.py regenerates the plain multi-part file.
- README "Planned": a USB nRF24 stick on the PC so Unity can talk to both
  the robot and the remote (what to work out), plus pointers to the other
  notes for later.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-14 19:13:28 +01:00
1 parent 60605209fb
commit 80270ba17e
6 files changed
+44 -11

No files matched your search

@@ -189,6 +189,11 @@ charge/on LEDs show through two slots in the floor.
cells dropped. Colours (owner, ASA): black case, red honeycomb (PART
"inlay"), white ON/OFF (PART "text"); load "top", "inlay" and "text" as one
multi-part object. Each extra colour adds a swap on the first 3 layers only.
- Printability (the STLs sliced in 0.2 mm layers, every area not carried by
the layer below listed): the brace pivot bosses stand on pillars and the
lip's tie band steps out at 45 deg (both were floating overhangs in the
first export); what's left are bridges: the 30 mm kickstand-recess roof,
the hinge trough, hole and counterbore tops, the USB-C opening.
- Checked: no part collides with the shells or with each other, the shells
and the inlay don't overlap, kickstand clear at 0 and 70 deg, bail clear
from 0 to -180 deg (CGAL intersections).
@@ -307,9 +307,10 @@ module bottom_shell() render(convexity = 10) difference() {
offset(delta = -(T + FIT + LIP_W)) outline_2d();
for (s = SCREWS) translate(s) circle(d = BOSS_D + 2 * FIT);
}
translate([0, 0, Z_SPLIT - 3]) lx(3) difference() { // ties the lip to the wall
// ties the lip to the wall; its underside steps out at 45 deg (no flat overhang)
for (i = [0 : 4]) translate([0, 0, Z_SPLIT - 3 - i * 0.35]) lx(3 + 0.01) difference() {
offset(delta = -(T - JOIN)) outline_2d();
offset(delta = -(T + FIT + LIP_W)) outline_2d();
offset(delta = -(T + FIT + LIP_W - i * 0.35)) outline_2d();
for (s = SCREWS) translate(s) circle(d = BOSS_D + 2 * FIT);
}
intersection() {
@@ -317,8 +318,9 @@ module bottom_shell() render(convexity = 10) difference() {
union() {
// screw towers
for (s = SCREWS) translate([s[0], s[1], Z_BOT]) cylinder(d = BOSS_D, h = Z_SPLIT - Z_BOT);
// bail pivot bosses in the side walls
for (m = [-1, 1]) translate([m * SIDE_U, BAIL_PIVOT[0], BAIL_PIVOT[1]]) rotate([0, -m * 90, 0]) cylinder(d = 10, h = 14);
// bail pivot bosses in the side walls, on pillars down to the floor (printable)
for (m = [-1, 1]) hull() for (z = [BAIL_PIVOT[1], Z_BOT + 5])
translate([m * SIDE_U, BAIL_PIVOT[0], z]) rotate([0, -m * 90, 0]) cylinder(d = 10, h = 14);
// UPS standoffs
for (m = [-1, 1]) translate([UPS_CENTRE[0] + m * UPS_HOLES, UPS_CENTRE[1], Z_BOT]) cylinder(d = 6, h = UPS_Z - Z_BOT);
// kickstand recess and hinge trough walls
@@ -356,7 +358,7 @@ module bottom_shell() render(convexity = 10) difference() {
// pin through a barrel. Friction on the pin holds the angle.
KS_RECESS = KS_T + 0.5;
KS_ROOF = Z_BOT + KS_RECESS + 2; // top of the recess roof
KS_AXIS_Z = Z_BOT + KS_BARREL_D / 2 + 0.3;
KS_AXIS_Z = Z_BOT + KS_BARREL_D / 2; // barrel tangent to the underside (sits on the bed when printed)
module kickstand_housing() {
translate([-KS_W / 2 - FIT - KS_WALL, KS_V[0] - FIT - KS_WALL_V, Z_BOT])
cube([KS_W + 2 * (FIT + KS_WALL), KS_V[1] - KS_V[0] + KS_BARREL_D / 2 + 2 * FIT + 2 * KS_WALL_V, KS_RECESS + 2]);