2026: remote v2 (flat console for the twist-grip sticks), STL/3MF exports, archive page

remote_v2.scad: a new remote for the same electronics, 216 x 116 x 32 mm,
ASA, two shells printed without supports and joined with M3 heat-set
inserts. Hangs level from a neck strap on a balance-point eyelet (top face
or front edge) with a fold-out body brace; kickstand for the table.
JH-D300X-R1 sticks clamp the plate; main perfboard (Teensy 4.0, nRF24,
IMU) clamped at its sides under the display; UPS board with its LEDs
through the floor. Red honeycomb and white ON/OFF inlays in the first
3 layers. Every part checked for collisions.

- stl/remote_v2/: print-ready STLs, plus a multi-part 3MF (export_3mf.py)
  with the inlays on filaments 2 and 3
- ARCHIVE.md: the original remote with the owner's photos; README shows v2
  and how to print it
- Notes for later: battery-voltage reading, IMU on Wire (18/19) with two
  stick axes moved to A7/A8, a stable 6 V supply for the 18 servos
- remote.scad: its sticks are JH-D300X-R1 (the model uses the D400X drawing)
- *.3mf through Git LFS; repo README says Teensy 4.0 remote

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-14 18:57:49 +01:00
1 parent e23216b3a1
commit 60605209fb
24 files changed
+918 -6

No files matched your search

+3 -2
View File
@@ -150,8 +150,9 @@ module nextion_3_5() {
color("#3050a0") translate([win[0] - 73.44/2, win[1] - 48.96/2, DISPLAY_POCKET_Z - 0.2]) cube([73.44, 48.96, 0.2]);
}
// JH-D400X-R4 4-axis joystick (X/Y +-25 deg, twist +-45 deg, button),
// from its dimension drawing. Mounted with its dust cover on the lid's top
// Joystick, modelled from the JH-D400X-R4 drawing (4-axis, X/Y +-25 deg,
// twist +-45 deg, button). The remote's sticks turned out to be JH-D300X-R1
// (label on the box, owner's photo): similar, dimensions not checked yet. Mounted with its dust cover on the lid's top
// face; the body hangs through the d40 opening. Local frame: stick axis on
// Z, Z = 0 on the dust cover's underside. Pots on +X and +Y.
JOY_COVER_D = 53.5;