2026 remote_v2 case: taller top shell, measured display, M3 display posts
- TOP_GROW: top shell 10 mm taller (room behind the display); the bottom shell is unchanged, dependent heights follow Z_SPLIT / Z_BOT. - Nextion dimensions as measured by the owner: board 100.6 x 55, LCD 85.7 x 55 x 3.86 plus a 1.3 mm flex cable, 11.21 mm glass to back of J1. LCD pocket allows the cable on either short side; bezel 1.0 mm (the display sat on the Teensy). - Display posts tapped M3 for M3 x 5 machine screws, 1.2 mm skin under the top face (was M2.5 self-tapping). README screw list and PLANNING.md updated; STLs regenerated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
2b4750f8f4
commit
3d6c4dd2f0
6 files changed
+32
-26
No files matched your search
@@ -70,8 +70,8 @@ Hardware (besides the electronics of the old remote):
|
||||
- M3 x 12 x 4 (shells), M3 x 8 button head x 2 (eyelet), M3 x 16 button
|
||||
head + washer x 2 (brace), M3 x 8 button head + 7 mm washer x 4 (main
|
||||
board clamps, no holes in the board), M3 x 40 + nut (kickstand pin)
|
||||
- M2.5 x 14 x 8 (joysticks, into their own boxes), M2.5 self-tapping x 4
|
||||
(display), M3 self-tapping x 2 (UPS board), M2 self-tapping x 2 (switch)
|
||||
- M2.5 x 14 x 8 (joysticks, into their own boxes), M3 x 5 machine screws x 4
|
||||
(display, tap the posts M3), M3 self-tapping x 2 (UPS board), M2 self-tapping x 2 (switch)
|
||||
- Set the Nextion's display direction to 180 in the Nextion Editor: the
|
||||
display is mounted turned round so its connector clears the Teensy's USB plug.
|
||||
|
||||
|
||||
Reference in new issue
Block a user