2026 docs: review of every README against today's state
- README / CLAUDE.md layout: dongle/, hardware/, tools/ submodule, make_remote_hmi.py; telemetry in the protocol; the PC can take the robot's place on the radio. CLAUDE.md: NextionUI is on Serial2 (said Serial1); remote-without-robot via the dongle + sim. - remote/README: MPU6050 supply row; stick calibration button names of the new SETUP page; upload/USB-port hints. - remote/NEXTION.md: display on Serial2, how the Editor upload goes. - robot/README: Battery in the file list, Comms/ServoDriver roles, packet structs instead of payload size, check the IMU gives live data (the remote's MPU6050 needed a full reset; RobotIMU::begin() only wakes it). - sim/README: smoke test covers telemetry and servo calibration; OpenScadModel. - dongle/README: AT2401C test result, app command table, SignalRGB note, air settings incl. ack payloads. - PLANNING.md: the display direction is in the generated HMI. - Unity README: what the project is. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
a59faf3b03
commit
179afdb705
9 files changed
+92
-33
No files matched your search
@@ -65,15 +65,21 @@ It drives the firmware the way the remote would and checks:
|
||||
- **`+vx` moves the body forward**,
|
||||
- link loss disarms,
|
||||
- a wrong-size packet is ignored,
|
||||
- the serial harness still works.
|
||||
- the robot's telemetry comes back in the ack payload, and every servo
|
||||
calibration command (HOLD / SET / SAVE / REVERT, arming refused) works,
|
||||
- the serial harness still works,
|
||||
- plus the body-pose, leg-clearance, heading and robot-gyro checks listed
|
||||
in the file.
|
||||
|
||||
## Using it in Unity
|
||||
|
||||
Open `Hexapod_Simulation_Unity` and press Play in `Main.unity`. No scene
|
||||
edits are needed: `HexapodSimBootstrap` adds a `HexapodSimulation` object,
|
||||
disables the old movement scripts (`Walk`, `RotationControl`, `Leg`), and
|
||||
binds the existing leg rig by name (`Leg` → `hip1` / `Hip2` / `Knie`). The
|
||||
on-screen panel (F1 toggles it) offers two input sources:
|
||||
binds the existing leg rig by name (`Leg` → `hip1` / `Hip2` / `Knie`). By
|
||||
default `OpenScadModel` swaps the old scene's robot for the OpenSCAD model
|
||||
of the real one (`HexapodSimulation.useOpenScadModel`). The on-screen panel
|
||||
(F1 toggles it) offers two input sources:
|
||||
|
||||
- **Keyboard:** test without a remote. WASD walks, Q/E turns, IJKL + U/O
|
||||
drive the right stick, 1–7 flip the toggles, Backspace disarms, +/-
|
||||
|
||||
Reference in new issue
Block a user