mangavalkandClaude Opus 5.5
b347f1c63f
Vendored from https://github.com/gpeter62/ESP_UniClock: the sketch source, the web UI and the libraries the ESP8266 build needs, unpacked from the bundled zips. Adds a PlatformIO project for the ESP-12. The source is unchanged; local changes follow as separate commits. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
55 lines
1.4 KiB
Arduino
55 lines
1.4 KiB
Arduino
#include <Ethernet.h>
|
|
#include <ArduinoHA.h>
|
|
|
|
#define BROKER_ADDR IPAddress(192,168,0,17)
|
|
|
|
byte mac[] = {0x00, 0x10, 0xFA, 0x6E, 0x38, 0x4A};
|
|
unsigned long lastSentAt = millis();
|
|
double lastValue = 0;
|
|
|
|
EthernetClient client;
|
|
HADevice device(mac, sizeof(mac));
|
|
HAMqtt mqtt(client, device);
|
|
HASensor temp("temp"); // "temp" is unique ID of the sensor. You should define your own ID.
|
|
|
|
void onBeforeSwitchStateChanged(bool state, HASwitch* s)
|
|
{
|
|
// this callback will be called before publishing new state to HA
|
|
// in some cases there may be delay before onStateChanged is called due to network latency
|
|
}
|
|
|
|
void setup() {
|
|
// you don't need to verify return status
|
|
Ethernet.begin(mac);
|
|
|
|
// set device's details (optional)
|
|
device.setName("Arduino");
|
|
device.setSoftwareVersion("1.0.0");
|
|
|
|
// configure sensor (optional)
|
|
temp.setUnitOfMeasurement("°C");
|
|
temp.setDeviceClass("temperature");
|
|
temp.setIcon("mdi:home");
|
|
temp.setName("Home temperature");
|
|
|
|
mqtt.begin(BROKER_ADDR);
|
|
}
|
|
|
|
void loop() {
|
|
Ethernet.maintain();
|
|
mqtt.loop();
|
|
|
|
if ((millis() - lastSentAt) >= 5000) {
|
|
lastSentAt = millis();
|
|
lastValue = lastValue + 0.5;
|
|
temp.setValue(lastValue);
|
|
|
|
// Supported data types:
|
|
// uint32_t (uint16_t, uint8_t)
|
|
// int32_t (int16_t, int8_t)
|
|
// double
|
|
// float
|
|
// const char*
|
|
}
|
|
}
|