; ESP_UniClock for the RetroModding NixieIN12v2 (5 V) clock. See README.md in this folder.
;
; The sketch keeps the upstream Arduino IDE layout (ESP32_UniClock2/ with all .ino files), so it
; still opens in the Arduino IDE. Libraries are the versions bundled upstream, unpacked in lib/.

[platformio]
src_dir = ESP32_UniClock2
data_dir = ESP32_UniClock2/data
default_envs = nixie_in12

[env:nixie_in12]
platform = espressif8266
board = esp12e
framework = arduino
; 4 MB flash: 2 MB app slot, 2 MB SPIFFS at 0x200000 (same split as the stock firmware)
board_build.ldscript = eagle.flash.4m2m.ld
board_build.filesystem = spiffs
board_build.flash_mode = dio
board_build.f_cpu = 80000000L
; evaluate #ifdefs when resolving includes: the sketch includes ESP32-only libraries inside #if
lib_ldf_mode = chain+
; CH340C adapter on COM7 without auto-reset: put the clock in flash mode by hand
; (hold GPIO0 to GND, tap RST, release GPIO0) before every upload/uploadfs.
upload_port = COM7
upload_speed = 460800
; "ck" = esptool --before no_reset --after soft_reset (no DTR/RTS toggling)
upload_resetmethod = ck
monitor_port = COM7
monitor_speed = 115200
monitor_filters = esp8266_exception_decoder