mangavalkandClaude Opus 5.5 3640c7fb3f Implement I2S0 8-bit LCD-mode DMA refresh ...

startI2S() sets up I2S0 in 8-bit parallel (LCD) mode at 5 MHz
(PLL_D2 160 MHz / 32, BCK div 1), routes stream bits 0..3 to
VID/TVID/HS/VS via I2S0O_DATA_OUT16+n and BCK to VCLK, and loops
DMA over an 18-descriptor chain of whole lines. stopI2S() stops TX,
returns the pins to GPIO low and frees the chain.

encodeRow() now stores clock c at c ^ 2 to match the 8-bit mode
byte order (bytes 2, 3, 0, 1 per word, as in bitluni's ESP32Lib).

Builds with no warnings; not yet checked on hardware.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-05 21:08:36 +02:00

..

src

Implement I2S0 8-bit LCD-mode DMA refresh

2026-10-05 21:08:36 +02:00

library.json

Set up PlatformIO project for EL512.256-H on ESP32

2026-10-05 21:00:42 +02:00