The panel driver counts ring refills, the largest gap between refills,
frame swaps, swap timeouts and I2S TX FIFO underruns (takeStats()). The
ESPHome component checks them every 10 s and logs a warning only when the
ESP32 side of the signal had a problem, plus a debug summary per minute.
Measured with Wi-Fi on: ~4600 refills/s, max gap < 0.4 ms (lead 1.7 ms),
no underruns or timeouts, so remaining blinks come from the signal being
disturbed on the wires (Wi-Fi transmit bursts), not from the refresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Driver (components/el512/el512_panel.*, ESP-IDF only):
- DMA ring of 8 x 4 lines (17 KB) refilled from the I2S EOF interrupt
(IRAM) instead of a 142 KB full-frame stream; ~107 KB heap freed.
- 256-entry lookup table encodes 8 pixels per step.
- Back buffer + displayed buffer, swapped at the start of a frame.
- PlatformIO builds it via lib_extra_dirs (EL512Core); lib/EL512 keeps
the Adafruit GFX front end.
ESPHome external component (platform: el512):
- DisplayBuffer with optional ENABLE / _LOWPWR pins, set_enabled(),
set_low_power(), helper functions for page lambdas.
- still_alive_page: plays the Portal end-credits show, then returns to
the previous page.
Still Alive engine moved to components/el512/still_alive.* with a built-in
5x7 font (from Adafruit GFX, BSD); the PlatformIO demo uses the same code.
The importer writes components/el512/still_alive_data.h and stops at 200 s
(--until-ms), matching the hand-trimmed data.
esphome/el512-panel.yaml: 8 pages (clock, forecast, agenda, dashboard,
now playing, Plex, solar, Still Alive), page select, rotation, display
and low-power switches, message text. home_assistant/packages/el512_panel.yaml:
helper template sensors for forecast, agenda, now playing and Plex streams.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5